Massey Ferguson MF 6700S Series 6713S 6714S 6715S 6716S 6718S Dyna-VT Deluxe Premium Operator Manual

Description

Massey Ferguson MF 6700S Series 6713S 6714S 6715S 6716S 6718S Dyna-VT Deluxe Premium Operator Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson MF 6700S Series 6713S 6714S 6715S 6716S 6718S Dyna-VT Deluxe Premium Operator Manual – PDF DOWNLOAD

Operation – MF 6700 S
Deluxe and Premium versions
MF 6713 S
MF 6714 S
MF 6715 S
MF 6716 S
MF 6718 S
Part. No : ACT001868A

Operator’s Manual :

The purpose of this manual is to enable the owner and the operator to operate the tractor appropriately under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many years of service in the Massey Ferguson tradition. Use for any other activity (particularly forestry work) is considered to be contrary to the intended use.

• The commissioning of equipment by the Massey Ferguson dealer on the user’s premises enables the dealer to ensure that these operating and service instructions are properly understood. Always consult the Massey Ferguson dealer if there is any part of this manual that you do not understand. It is important that these instructions are understood and followed.
• This manual does not cover all operation and safety instructions relevant to the implements and accessories that may be fitted at the time of tractor delivery or later. It is essential that operators use and understand the Operator’s Manuals relating to these implements and accessories. This chapter in the Operator’s Manual highlights certain basic safety-related situations that may be encountered during normal operation and servicing of the tractor and provides the information needed to handle these situations.
• This chapter supplements any safety instructions given in other chapters of this manual. It may be necessary to take additional precautions, depending on the implements and accessories used and the working conditions on-site or in the service area. Massey Ferguson can under no circumstances exercise direct control over the commissioning, operation, inspection, lubrication, or servicing of the tractor. It is therefore YOUR responsibility to take suitable safety precautions in such areas.

TABLE OF CONTENTS:

Massey Ferguson MF 6700S Series 6713S 6714S 6715S 6716S 6718S Dyna-VT Deluxe Premium Operator Manual – PDF DOWNLOAD

1 Tractor identification 11
1 1 Locating serial numbers 13
1 1 1 Locating serial numbers 1 3
1 2 Your tractor identification details 15
1 2 1 Your tractor identification details 1 5
2 Safety instructions and safety points – Warranty 17
2 1 Introduction 19
2 1 1 Introduction – Safety instructions 1 9
2 2 Safety – Symbols and terms 21
2 2 1 Safety- Symbols and terms 2 1
2 3 Safety decals and instructions 22
2 3 1 Checking and replacing the safety decals and instructions 2 2
2 3 2 Presentation and location of the safety decals and instructions 2 3
2 4 General safety instructions 28
2 4 1 Awareness of the safety instructions and symbols 2 8
2 4 2 Operator familiarity in the use of the tractor 2 8
2 4 3 Filling the fuel tank 2 9
2 4 4 Mounting and dismounting the operator’s seat 2 9
2 4 5 Mandatory procedure before dismounting the tractor 30
2 5 Special safety instructions for preparing the tractor for use 31
2 5 1 Protective clothing 31
2 5 2 Activated carbon filter information 31
2 5 3 Safety devices and items 34
2 5 4 Checking the tractor 34
2 6 Specific safety instructions for starting the tractor 36
2 6 1 Protection of persons other than the operator 36
2 6 2 Start up safely 36
2 6 3 Starting the tractor with jump start cables 37
2 6 4 Checks to be carried out after start-up 38
2 7 Specific safety instructions for using the tractor 39
2 7 1 General instructions 39
2 7 2 Protection of persons other than the operator 4 0
2 7 3 Overturning 4 0
2 7 4 Tractor towing 4 3
2 7 5 Regulatory data on maximum permitted trailed weights 4 3
2 7 6 Road use 4 4
2 7 7 Parking brake 4 6
2 7 8 Power take-off 4 6
2 7 9 Implements 4 7
2 7 1 0 Front-end loader 4 9
2 8 Specific safety instructions for servicing the tractor 50
2 8 1 Pollution warning to observe when servicing the tractor 50
2 8 2 General instructions 50
2 8 3 Handling instructions 51
2 8 4 Special instructions for cleaning the tractor 53
2 9 Protective structures 54
2 9 1 Protective structures – Use and accreditation 54
2 9 2 Cab 54
2 9 3 Seat belt 54
Operation – MF 6700 S
ACT001868A
Table of contents
2 9 4 Instructor seat 5 5
2 10 Warranty 56
2 10 1 General 5 6
2 10 2 Pre-delivery inspection and commissioning on the user’s premises 5 6
2 10 3 Warranty procedure 5 6
2 10 4 Procedure to follow if changing region 5 6
2 10 5 Servicing during and after the warranty period 5 7
2 10 6 California emission control warranty statement 5 7
2 10 7 Emission reduction warranty statement for the United States and Canada 60
3 Usage 65
3 1 Operator environment 69
3 1 1 Steering console 6 9
3 1 2 Instrument panel 70
3 1 3 Control unit 7 6
3 1 4 Pedals 77
3 1 5 Steering wheel 77
3 1 6 Operator presence detector 78
3 1 7 Automatic adjustment pneumatic seat 8 2
3 1 8 Instructor seat 88
3 1 9 Right-hand console 89
3 1 10 Command Control Armrest 8 9
3 1 1 1 Right-hand pillar 9 1
3 1 1 2 Left-hand console 9 2
3 1 13 Upper console 9 3
3 1 14 Manual air conditioning 9 5
3 1 15 Automatic air conditioning 10 0
3 1 16 Additional heater 10 6
3 1 17 Accessories sockets 10 7
3 1 18 Emergency exits 10 9
3 1 19 Sun visor 10 9
3 1 20 Roof hatch 1 10
3 1 21 Wheel chock(s) (optional) 1 1 1
3 2 Setup and Information Screen control screens o n the instrument
panel 113
3 2 1 Using the Setup and Information Screen 1 13
3 2 2 Setup and Information screens 1 1 4
3 3 Body 127
3 3 1 Opening the bonnet 1 27
3 3 2 Adjusting the external rear-view mirrors 1 27
3 3 2 1 Positioning the arms 1 27
3 3 2 2 Adjusting the arm extensions (depending on model) 1 28
3 3 2 3 Rear-view mirror with manual adjustment 1 28
3 3 2 4 Rear-view mirror with electric adjustment 1 28
3 4 Engine 130
3 4 1 Running-in 13 0
3 4 2 Filling with fuel 13 0
3 4 3 Start switch 13 2
3 4 4 Start-up 13 2
3 4 5 Starting the Tier 4F/ Stage IV SCR Technology engine in cold weather 13 3
3 4 6 Information on the different operating modes of the Tier 4F/ Stage IV SCR
Technology engine 13 5
3 4 7 Stopping the engine 1 4 0
3 4 8 Engine speed 1 4 0
3 4 9 Storing engine speeds 1 4 2
3 5 Transmission 144
3 5 1 Presentation of the different driving modes 1 4 4
Operation – MF 6700 S
ACT001868A
Table of contents
3 5 2 Clutch function 1 4 4
3 5 3 PowerShuttle 1 4 6
3 5 4 Setting start-up speeds 1 4 8
3 5 4 1 Start speeds 1 4 8
3 5 5 Storage of forward speeds 1 4 9
3 5 6 Engine underspeed supervisor 1 5 1
3 5 7 Lever mode 1 5 1
3 5 8 Pedal mode 1 5 3
3 5 8 1 Pedal Mode in winter conditions (on frozen or snow-covered ground) 1 5 5
3 5 9 Self-propelled mode 1 5 6
3 5 10 Road mode (Hare)/Field mode (Tortoise) 1 5 7
3 5 1 1 Changing forward speed 1 5 8
3 5 1 2 Tractor towing 1 5 9
3 5 13 Tractor limp home mode 1 5 9
3 5 14 Forward speed calibration 1 6 1
3 6 Brakes 163
3 6 1 Brake pedals 1 6 3
3 6 2 Hydraulic trailer brake 1 6 3
3 6 3 Pneumatic trailer brake 1 6 4
3 6 4 Parking brake 1 6 5
3 7 Steering 167
3 7 1 Steering 1 67
3 8 Front axle 170
3 8 1 Four-wheel drive front axle 170
3 8 2 Suspended front axle 17 1
3 8 3 Permissible load on the front axle 17 3
3 9 Differential lock 176
3 9 1 Differential lock 17 6
3 10 Power take-off 178
3 10 1 Front power take-off 17 8
3 10 2 Rear power take-off (PTO) 17 8
3 10 2 1 Selecting the power take-off speed 17 9
3 10 2 2 Engaging PTO in manual mode: 180
3 10 2 3 Engaging PTO in automatic mode: 180
3 10 3 Economy PTO 18 1
3 10 4 Changing the flanged shaft 18 2
3 10 4 1 Changing the shaft 18 2
3 10 5 PTO external control 183
3 10 6 Power take-off electronic controls 18 4
3 10 7 Power take-off protection 18 4
3 11 Linkage 186
3 11 1 General 186
3 1 1 2 Rear linkage electronic controls 18 6
3 1 1 3 Rear linkage operation 188
3 1 1 4 Rear linkage external controls 19 3
3 1 1 5 Front linkage 19 3
3 1 1 6 Top link 19 9
3 1 1 7 Bottom links 20 1
3 11 8 Lift rods 20 2
3 11 9 Stabilizers 20 4
3 1 1 9 1 Stabilizers with manual telescopic adjustment 20 4
3 1 1 9 2 Automatic stabilizers 20 5
3 1 1 9 3 Stabilizers with shoes 20 6
3 11 10 Ball joint support 20 7
3 12 Towing equipment 208
3 1 2 1 General 20 8
3 1 2 2 Swinging drawbar 210
Operation – MF 6700 S
ACT001868A
Table of contents
3 1 2 2 1 Fitting the swinging drawbar 2 1 1
3 13 Auxiliary hydraulics 213
3 13 1 General 2 13
3 13 2 Description of hydraulic couplers on Closed Center system (Load Sensing) 213
3 13 3 Use of hydraulic couplers on Closed Center system ( Load Sensing) 215
3 13 4 Auxiliary hydraulics locking/ unlocking 220
3 13 5 Hydraulics control lever 221
3 13 6 Description and use of the cab controls 222
3 13 7 Description and use of the external controls 229
3 13 8 Setting flow rates and time delay 230
3 13 9 Emergency manual spool valve control 23 1
3 14 Standard front-end l oader function 233
3 1 4 1 Front-end loader 23 3
3 14 2 Layout of components 23 3
3 1 4 3 Standard front-end loader connection 23 4
3 1 4 4 Using the electric joystick of the standard front-end loader 23 5
3 1 4 4 1 Joystick functions for the standard front-end loader 23 5
3 1 4 4 2 Floating position with the standard front-end loader 23 6
3 1 4 4 3 Displaying the flow rates of the standard front-end loader 23 6
3 1 4 4 4 Arm suspension on the standard front-end loader 23 8
3 1 4 4 5 Locking and unlocking standard front-end loader accessories 23 8
3 1 4 4 6 Standard front-end loader/engine speed automation 23 9
3 1 4 4 7 3rd and 4th functions of the standard front-end loader 23 9
3 1 4 4 8 Automatic shaking function of the standard front-end loader implement 240
3 15 Front-end l oader function with 3rd function option 241
3 1 5 1 Front-end loader 24 1
3 1 5 2 Layout of components 2 4 1
3 1 5 3 Front-end loader connection with 3rd function option 24 2
3 1 5 4 Using the front-end loader electric joystick with the 3rd function option 24 3
3 1 5 4 1 Joystick functions for the front-end loader with the 3rd function option 24 3
3 1 5 4 2 Floating position of the front-end loader with the 3rd function option 24 4
3 1 5 4 3 Displaying the front-end loader flow rates with the 3rd function option 24 4
3 1 5 4 4 Arm suspension on the front-end loader with the 3rd function option 24 6
3 1 5 4 5 Locking and unlocking front-end loader accessories with the 3rd function
option 24 6
3 1 5 4 6 Front-end loader/engine speed automation with the 3rd function option 24 7
3 1 5 4 7 Automatic shaking function for the front-end loader implement with the
3rd function option 247
3 1 5 5 Unhitching the front-end loader with the 3rd function option 247
3 16 Lighting 249
3 1 6 1 Main lighting control module 24 9
3 1 6 2 Work lights module 250
3 1 6 3 Direction indicators 25 1
3 17 Suspended cab 255
3 1 7 1 Suspended cab 25 5
3 18 Front tires and track widths 258
3 18 1 Wheel studs 25 8
3 18 2 Installation points of the axle stands 25 8
3 18 3 Adjusting the front wheel track width 25 9
3 18 4 Adjusting the 4WD front axle stops 26 2
3 18 4 1 Fitting the oscillation stops 26 2
3 18 4 2 Adjusting the steering angle 2 6 2
3 18 4 3 Toe-in check 263
3 18 4 4 Adjusting the front fenders Shoe side adjustment on the front axle 263
3 18 4 5 Adjusting the front fenders Adjusting the height of the support on the
3 18 4 6 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments are possible) 2 6 4
3 18 5 Tires 2 6 4
3 18 6 Tire pressures 2 6 4
Rear tires and track widths 265
3 19 1 Wheel studs 2 6 5
3 19 2 Installation points of the axle stands 2 6 5
3 19 3 Rear track width with flanged shafts 2 6 6
3 19 4 Rear track width with short straight shafts 268
3 19 5 Rear track width with long straight shafts 27 1
3 19 6 Adjusting the rear wheel track width 27 3
3 19 6 1 Adjustment of wheel position on the straight shaft 27 4
3 19 6 2 Adjustment of wheel position on the straight shaft 27 4
Dual wheels 276
3 20 1 Dual wheels 27 6
3 20 2 Installation points of the axle stands 277
3 20 3 Dual rear wheel track width with long straight shafts 27 8
Ballast 284
3 21 1 Liquid ballasting 28 4
3 2 1 2 Front-end weight 28 4

MASSEY FERGUSON MF 6700S SERIES 6713S 6714S 6715S 6716S 6718S DYNA-VT DELUXE PREMIUM OPERATOR MANUAL:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V