Mitsubishi Fuso Canter FE Chassis Shop Manual 2014 Egypt Edition

Description

Mitsubishi Fuso Canter FE Chassis Shop Manual — Egypt Market, April 2014

This Mitsubishi Fuso Canter FE Chassis Shop Manual 2014 Egypt Edition is the dedicated chassis-volume workshop reference for the FE-series cab-over truck as delivered in Egypt. It carries publication number 00ELT0061, was issued in April 2014, and gathers every chassis, driveline, running-gear, brake, steering, cab and interior procedure that a workshop needs to keep an FE Canter in service. Rather than a generalised overview, the file is arranged group-by-group, exactly the way the Fuso service network organises its work.

The layout follows the Fuso group numbering system: every major assembly has its own Gr code, the pages are cross-referenced between troubleshooting charts, on-vehicle adjustments and bench service procedures, and each procedure is written with the specs, torque figures, special-tool numbers and service limits shown alongside the illustrations. That structure is what makes the Mitsubishi Fuso Canter FE chassis shop manual usable both as a repair guide and as a data lookup during a live job.

File Details

• Manual type: Chassis Shop Manual (chassis volume)
• Brand / Manufacturer: Mitsubishi Fuso
• Model series: CANTER FE
• Market: Egypt
• Publication number: 00ELT0061
• Edition / Date: April 2014
• Language: English
• Format: PDF
• Page count: 447 pages
• Companion volumes referenced in the manual: Engine volume Pub.No.00ELT0060, Electrical volume Pub.No.00ELT0062

Chapters Covered

• 00 General — model coding system, power train table, how to read the manual, illustrated parts breakdown, circuit-reading guide, chassis/engine number and name plate, precautions for maintenance, jacking up, standard tightening torques
• 21 Clutch — clutch control, clutch master cylinder, clutch proper and direct power cylinder, troubleshooting, on-vehicle inspection and adjustment (fluid replacement, air bleeding, disc wear limit, pedal adjustment), clutch pedal, clutch master cylinder, clutch hose, clutch proper, clutch control
• 22 Manual Transmission — transmission structure, synchromesh and interlock mechanisms, speedometer gear bushing, troubleshooting, on-vehicle inspection, removal and installation of transmission, gear shifter upper, rear cover and parking brake, reverse idler gear, transmission body, drive pinion, mainshaft, countershaft, transmission control, bearing puller and installer
• 25 Propeller Shaft — configuration of propeller shaft connection, propeller shaft structure, troubleshooting, removal and installation, service of universal joints, slip yoke, centre bearing and balancing
• 26 Front Axle — wheel hub and brake drum, knuckle and kingpin, front axle, troubleshooting, wheel alignment, steering angle, side slip, tie rod end ball joint, wheel bearing play, knuckle joint play, tie rod
• 27 Rear Axle — wheel hub and brake drum, reduction and differential, troubleshooting, axle oil inspection and replacement, wheel bearing play, axle housing, reduction and differential service
• 31 Wheel, Tire — specifications, troubleshooting, wheel nut looseness inspection, wheel and tire service, disc wheel inspection, tire runout correction and balance weights
• 33 Front Suspension — front suspension elements, troubleshooting, stabiliser (FE85), shock absorber, leaf spring
• 34 Rear Suspension — rear suspension elements, troubleshooting, stabiliser (FE85), shock absorber, leaf spring by area
• 35 Brake — brake system, vacuum pump, vacuum booster and brake master cylinder, front drum brake, rear drum brake, troubleshooting, fluid replacement, air bleeding, brake pedal adjustment, lining thickness, shoe clearance, vacuum line and booster inspection
• 36 Parking Brake — parking brake system, parking brake lever, parking brake assembly, troubleshooting, shoe clearance adjustment, lever inspection and adjustment, parking brake control
• 37 Steering — steering system, oil flow, power steering gear assembly, power steering oil pump, troubleshooting, steering wheel play, column looseness, rod and arm looseness, system mounts, oil service, performance verification, drag link ball joint, steering column, gear assembly, oil pump, oil tank
• 41 Bumper, Frame — frame structure, front bumper, frame inspection and repair including crack repair and rivet replacement
• 42 Cab Mounting, Tilt — front cab mounting, rear cab mounting, cab tilt link (FE84), troubleshooting, cab tilt system adjustment, cab removal and installation (FE84 and FE85), front/rear cab mounting, cab tilt link, cab stay
• 43 Door — front door lock system, door glass opening and closing mechanism, troubleshooting, front door alignment, front door, door panel
• 51 Exterior — wiper and washer system, troubleshooting, mirror, wiper and washer, front cover, front grille, front corner panel, headlamp, step, wheel house, window glass
• 52 Interior — seat (driver and passenger side), seat belt, instrument panel (lower, driver upper, passenger upper, main panel), trim and scuff plate, head lining
• 55 Heater, Ventilation — heater, air duct, heater control, troubleshooting, heater control cables, air duct, heater unit and blower

Read as a whole, the Mitsubishi Fuso Canter FE chassis shop manual gives a technician a single indexed source that moves from a symptom in a troubleshooting matrix, through the on-vehicle checks and adjustment values, into the full bench disassembly, inspection and reassembly procedure for each assembly — with the tightening torques, service standards, lubricants and special tools printed alongside every step. That continuity is the reason a manual of this kind stays on the bench rather than on a shelf.

What This Manual Lets You Do

With the Mitsubishi Fuso Canter FE Chassis Shop Manual 2014 Egypt Edition on hand, the whole chassis side of the truck is workable in one reference. That includes:

• Servicing the clutch hydraulic circuit — master cylinder overhaul, direct power cylinder rebuild, fluid replacement and air bleeding, pedal height and free play adjustment, and clutch disc wear checks.
• Overhauling the M035S5 five-speed manual transmission — shifter upper, rear cover, parking brake, reverse idler, mainshaft, countershaft, drive pinion, single-cone and triple-cone synchronisers, interlock mechanism and control cables.
• Rebuilding the propeller shaft — universal joints, slip yoke, centre bearing, phasing, alignment marks and dynamic balance.
• Servicing the front axle (F300T reverse Elliot I-beam) and rear axle (R035T banjo, D035H hypoid reduction) — wheel hubs, brake drums, kingpins, knuckles, axle shafts and the complete reduction and differential.
• Adjusting wheel alignment, steering angle, camber, caster and kingpin inclination, plus side slip checks.
• Rebuilding both drum brake axles and the parking brake — wheel cylinders, linings, drums, shoe clearance, vacuum pump, tandem vacuum booster and master cylinder.
• Servicing the power steering gear assembly, drag link and vane-type power steering oil pump, including performance verification and relief pressure checks.
• Working on the frame, front bumper, cab mountings, cab tilt system, doors, exterior trim, glazing, interior, instrument panel and heater/ventilation system.

Every one of those jobs depends on getting the clearances, torques and adjustment values right the first time. The manual provides the standard values and limits that separate a correct repair from a comeback — piston-to-body clearances, bearing starting torques, backlash figures, brake lining thickness limits, spring installed loads, and the tightening torque tables that let a technician torque a fastener without guessing.

Who This Chassis Shop Manual Is For

The Mitsubishi Fuso Canter FE Chassis Shop Manual suits workshop technicians, fleet maintenance crews, independent diesel mechanics and owners who do their own chassis, driveline, brake, steering, cab and interior work on the FE-series Canter. It is written in the same language and structure that the Fuso service network uses, so the group numbers, code numbers and connector references match how the truck is actually put together.

It is a chassis-only volume. Engine overhaul detail lives in the companion engine manual (Pub.No.00ELT0060) and electrical wiring in the companion electrical manual (Pub.No.00ELT0062). If you need the complete factory picture of the truck, the three volumes are designed to be used together.

Delivery

IMAGES PREVIEW

The manual is delivered as an instant-download PDF after payment — no shipping, no waiting for a disc, and no restrictions on which device you read it on. Open it on a laptop in the workshop, on a tablet next to the truck, or print the pages you need and take them under the vehicle with you. Every illustration, table and torque value is reproduced at full size, so nothing is lost between screen and paper. Instant access, permanent copy, one purchase.