Models 310g 310sg 315sg Backhoe Loader Operators Manual – PDF DOWNLOAD

Description

Models 310g 310sg 315sg Backhoe Loader Operators Manual

MODELS 310G 310SG 315SG BACKHOE LOADER OPERATORS MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

READ THIS MANUAL carefully to learn how to operate and service your machine correctly. Failure to do so could result in personal injury or equipment damage. This manual and safety signs on your machine may also be available in other languages. (See your John Deere dealer to order.) THIS MANUAL SHOULD BE CONSIDERED a permanent part of your machine and should remain with the machine when you sell it. MEASUREMENTS in this manual are given in both metric and customary U.S. unit equivalents.

• Use only correct replacement parts and fasteners. Metric and inch fasteners may require a specific metric or inch wrench. RIGHT-HAND AND LEFT-HAND sides are determined by facing in the direction of forward travel. WRITE PRODUCT IDENTIFICATION NUMBERS (P.I.N.) in the Machine Numbers section.
• Accurately record all the numbers to help in tracing the machine should it be stolen. Your dealer also needs these numbers when you order parts. File the identification numbers in a secure place off the machine.

TABLE OF CONTENTS:

• Safety—Safety Features
• Safety Features
• Safety—General Precautions
• Recognize Safety Information
• Follow Safety Instructions
• Operate OnIy lf Qualified
• Wear Protective Equipment
• Avoid Unauthorized Machine Modifications
• Inspect Machine
• Stay Clear Of Moving Parts
• Avoid High Pressure Fluids
• Beware Of Exhaust Fumes
• Prevent Fires
• Prevent Battery Explosions
• Handle Chemical Products Safely
• Dispose Of Waste Properly
• Prepare For Emergencies
• Safety—Operating Precautions
• Use Steps And Handholds Correctly
• Start Only From Operator’s Seat
• Use And Maintain Seat Belt
• Prevent Unintended Machine Movement
• Prevent Unintended Machine
• Movement—If Equipped With Pilot
• Controls
• Avoid Work Site Hazards
• Keep Riders Off Machine
• Avoid Backover Accidents
• Avoid MachineTipover
• Add And Operate Attachments Safely
• Use Special Care When Operating
• Operating Or Traveling On Public Roads
• Inspect and Maintain ROPS
• Safety—Maintenance Precautions
• Park And Prepare For Service Safely
• Service Cooling System Safely
• Remove Paint Before Welding or Heating
• Make Welding Repairs Safely
• DriveMetaIPinsSafer
• Safety—Safety Signs
  Safety Signs (SN 910056—919463)
• Safety Signs (SN 919464—)
• Operation—Operator’s Station
  PedalsandLevers
• Pedals and Levers—If Equipped With Pilot
• Controls
• Display Monitor Functions
• RightSide Console Functions
  Controls—Steering Console
• Pilot Control Enable/Disable Switch—If
• Equipped
• Pattern Select Switch—If Equipped (SN
• 910056—919463)
• HornButton
  Defroster, Heater, and Air Conditioner
• Controls—If Equipped
• Side Windows—Secondary Exits
• RearWindows
  AdjustingSeat
• SeatBeIt
• Steering Wheel Tilt Lever—If Equipped
• Operation—Operating The Machine
• Inspect Machine Daily Before Starting
• Check Instruments Before Starting
• StartingtheEngine
• Starting Fluid—Cold Weather Start Aid—If
  Equipped
• Using Booster Batteries—12Volt System
• Using Coolant Heater—If Equipped
• Warm—Up
  ColdWeatherWarmUp
• Ride Control Operation—If Equipped
• Pilot Control Operation—If Equipped
• DrivingtheMachine
• OperatingStabiIizers
• Operating Boom Lock—3106, 31OSG
  Operating Boom Lock—31586
• Operating Swing Lock
• Operating Backhoe—John Deere
• TwoLeverControls
• Operating Backhoe—Excavator TwoLever
  Controls
• Operating Backhoe—John Deere Pilot
• Controls
• Operating Backhoe—Excavator Pilot
• Controls
• SideShifting the Backhoe Boom—3155C
• Operating Extendible Dipperstick—lf
• Equipped
• Operating Extendible Dipperstick Lock—If
• Equipped
• Operating Backhoe Auxiliary Hydraulic
• Functions—If Equipped
  Operating Loader
• Operating Differential Lock
• Operating Mechanical Front Wheel Drive
• (MFWDl—If Equipped
• Lifting
• ParkingtheMachine
  Loading Machine on a Trailer
• Towrng
  Maintenance—Machine
• DieselFuel
• Low Sulfur Diesel Fuel Conditioner
  Dieselscan FuelAnaIysis
• Handling and Storing Diesel Fuel
  Alternative and Synthetic Lubricants
• Diesel Engine BreakIn Oil
• DieselEngineOiI
• Transmission, Hydraulic, Axles, and
• Mechanical Front Wheel Drive Oil
• Grease
• Grease For Extendible Dipperstick,
• Sideshift Frame, And Stabilizer Leg Wear
• DieselEngineCooIant
  Maintenance—Periodic Maintenance
• Service Your Machine at Specified Intervals
  Check Hour Meter Regularly
• Prepare Machine for Maintenance
• LoaderBoomServiceLock
  Opening and Closing Engine Hood
• FuelTank
• Maintenance And Repair Record
• KeepingSystem
• OILSCAN PLUs, COOLSCAN PLUS
• DIESELSCAN, and 3Way Coolant Test
• Service Intervals
• Required Parts
• Maintenance—As Required
• Inspect Loader Boom Service Lock
• Check and Adjust Boom Lock3106, 31DSG
• CheckTIrePressure
  TirelnflationPressures
• CheckWheeIFasteners
  CIeanCabAirFilters
• Inspect and Clean Hydraulic Reservoir
  FIIlScreen
• Drain Fuel Tank Water and Sediment
• Clean Engine Air Cleaner Dust Unloader
• Valve
• Clean or Replace Air Cleaner Elements
• lnspectBelt
• Grease MFWD Drive Shaft Splines—If
• Equipped
• Grease Sideshift Rafls—31SSG
• Grease Stabilizer Leg Wear Strips—31556
  Grease Extendible Dipperstick Side Rails—
• ”Equipped
• Grease Extendable Dipperstick Backhoes—
• lequipped
• Grease Front Wheel
• Bearings—NonPowered (SN—911129)
  Grease Front Wheel
• Bearings—NonPowered (SN 91113D—)
  Maintenance—Every 10 Hours or Daily
• Checking Hydraulic Reservoir Oil Level
• Check EngineOiILevel
• CheckCooIantLeveI
• GreaseLoaderPivots
• Grease 4in1 Bucket Pivots—If Equipped
• Grease Stabilizer Pivots and Cylinder Pins
• Grease Backhoe Linkage, Pivots, and
• CylinderRodEnds
• Grease NonPowered Front Axle and
• Steering Pivots (SN—911129)
• Grease NonPowered Front Axle and
• Steering Pivots (SN 911130—)
• Grease MFWD Front Axle and Universal
• Joints—If Equipped
• Maintenance—After First 100 Hours
• Change Engine BreakIn Oil And
• ReplaceFilter
• Replace Transmission Oil Filter
• Maintenance—Every 250 Hours
• Check MFWD Planetary Housing Oil—If Equipped
• Check MFWD Axle Oil Level—If Equipped
• Check Battery Electrolyte Level and
• Terminals
• CheckRearAxIeOiILevel
• Check Transmission Oil Level
• Maintenance—Every 500 Hours
• Check Coolant and Add Conditioner
• CheckAirIntakeHose
• Replace Hydraulic Oil Filter
• Check BoomtoDipperstick Pin Bolt Torque
• Replace Hydraulic Reservoir Breather
• Change Engine Oil and Replace Filter
• Replace Final Fuel Filter
• Maintenance—Every 1000 Hours
• Clean, Pack, and Adjust Front Wheel
• Bearings—NonPowered (SN—911129)
• Clean, Pack, and Adjust Front Wheel
• Bearings—NonPowered (SN 911130—)
• Change MFWD Front Wheel Planetary
• Housing Oil—If Equipped
• Change MFWD Front Axle Housing Oil—If Equipped
• Clean Engine Crankcase Ventilation Tube
• Change Transmission and Torque
• Converter Oil and Replace Filter
• ChangeRearAxleOiI
• Replace Pflot Control Filter
• CheckEngineSpeed
• Change Hydraulic Reservoir Oil
• Replace Engine Air Cleaner Elements
• Maintenance—Every 2000 Hours
• Adjust Engine Valve Lash (Clearance)
• Miscellaneous—Machine
• External Service Brake Inspection
• Inspecting And Cleaning Dusty
• Secondary And Primary Element
• Check ReceiverDryer—lf Equipped
• Checking Coolant Hoses and Radiator
• Draining the Cooling System
• Filling the Cooling System
• Do Not Service 0r Adjust Injection
• NozzlesOrlnjection Pump
• Replace Engine Torsional Damper
• Draining Fuel Filter Sediment
• Handling, Checking And Servicing Batteries
• Carefully
• ReplacingBatteries
• RemovingBatten’es
• ReplacingFuses
• Remove and Install Halogen Bulb
• Checking Neutral Start System
• Changing Loader Buckets
• Reversing Stabilizer Feet—3106, 31 USS
• Changing Sideshift Backhoe Stabilizer
• Feet—31SSG
• Adding Liquid Ballast to Front Tires—310G
• Adding Liquid Ballast to Front
• Tires—3108G and 31SSG
• WeldingonMachine
• Checking Ride Control Accumulator—If Equipped
• Discharge Ride Control System
• Hydraulic Pressure—If Equipped
• Discharge Pilot Control System
• Hydraulic Pressure—If Equipped
• Lowering Boom Without Electrical
• Power—For Machines IMth Pilot Controls
• CheckParkBrake
• Bleeding Service Brakes
• Service Recommendations For STC°‘
• Fittings
• Check and Adjust Engine Speed Control Linkage
• Adjusting Speed Control Lever Tension (SN—913416)
• Adjusting Speed Control Lever Tension (SN913417—)
• Adjusting Pilot Control Wrist Rest —If Equipped
  Checking and Adjusting ToeIn (SN—911129)
• Checking and Adjusting ToeIn (SN 911130—)
• Installing Teeth on Backhoe Bucket
• Do Not Service Control Valves,
• Cylinders, Pumps or Motors
• Hardware Torque Specifications
• Keep ROPS Installed Properly
• Unified Inch Bolt and Cap Screw Torque
• Values
• Metric Bolt and Cap Screw Torque Values
• Miscellaneous—Operational Checkout
• Operational Checkout Procedure
• Gauge and Indicator Check With Engine Off
• FNR, Neutral Start Circuit and Reverse WamingAIannChecks
• Park Brake, Indicator Light, and Engine
• Speed Control Linkage Checks
• Brake System Checks
• Steering System Checks
• Hydraulic System Checks
• Pilot Control Operation Checks—If Equipped
• Check Operation Of Accessories (Engine
• Stopped)
• CabComponentChecks
• MiscellaneousChecks
• MisceIIaneous—Troubleshooting
• Troubleshooting Procedure
• Engine
• EIectricaISystem
• Gaugesand Indicators
• HydraulicSystemTransmission
• Miscellaneous—Storage
• Prepare Machine For Storage
• Miscellaneous—Machine Numbers
• Record Product Identification Number (PIN)
• Record Engine Serial Number
• Record Transmiwion Serial Number— ManualShiIt
• Record Transmission Serial
• Number—Powershift—(31OSG, 31SSG)
• Record Rear Axle Housing Serial Number
• Record (MFWD) Front Axle Housing
• Serial Number—If Equipped
• MisceIIaneous—Specifications
• TraveISpeeds
• Backhoe Loader Drain and Refill Capacities
• 310GSpecifications
• 310G Backhoe Loader Dimensions
• 310G BackhoeLoader
• 310G Backhoe Loader Weight
• 310G Buckets
• 310G Backhoe Loader Lifting Capacities—Standard Dipperstick
• 310G Backhoe Loader Lifting
• Capacities—Extendible Dipper stick (Retracted)
• 310G Backhoe Loader Lifting
• Capacities—Extendible Dipperstick (Extended)
• 31056 and 31SSG Specifications
• 31056 and 31556 Backhoe Loader
• Dimensions
• 31056 and 31556 Backhoe Loader
• 31056 and 31556 Backhoe Loader Weight
• 31OSG,31SSG Buckets
• 31056 And 31556 Backhoe Loader
• Lifting Capacities—Standard Dipperstick
• 31056 And 31556 Backhoe Loader
• Lifting Capacities—Extendible Dipperstick
• (Retracted)
• 31056 And 31556 Backhoe Loader
• Lifting Capacities—Extendible Dipperstick (Extended)
• Miscellaneous—Crime Prevention Tips
• HeIp Prevent Crime
• Record Construction Identification Numbers
• Keep Proof owner ship
• Park Indoors Out of Sight
• When Parking Outdoors
• Reduce VandaIism
• Report Thefts Immediately
• Precautions for Alternator and Regulator

FILE FORMAT:

LANGUAGE:ENGLISH
PAGES:238
DOWNLOADABLE:YES
FILE TYPE:PDF

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.