New Holland B95B Tier 3 Backhoe Loader Parts Catalog 87659788 NA 2008 – PDF

Description

New Holland B95B Tier 3 Backhoe Loader Parts Catalog – Publication 87659788 NA

This is the full parts catalog for the New Holland B95B Tier 3 backhoe loader, issued under publication number 87659788 NA and dated 01Feb08 as the First Edition. It is the reference document a parts counter, workshop or owner uses to identify the exact component fitted to a machine and to order the correct number the first time. Every figure in the book is an exploded illustration with numbered call-outs that tie directly to a parts list showing reference number, part number, year or serial applicability, quantity and description.

The catalog runs to roughly 3,108 pages and is organised into main sections with their own sequence codes, so a single assembly can be located quickly without wading through unrelated material. Alongside the standard machine, the book documents the NA, EU and market-specific variations, the centre pivot and side shift backhoe configurations, 2WD and 4WD drivelines, Power Shuttle and Power Shift transmissions, and a large list of optional equipment.

File Details

• Manual type: Parts Catalog
• Brand: New Holland
• Model: B95B Tier 3 Backhoe Loader
• Publication number: 87659788 NA
• Edition: First Edition
• Publication date: 01Feb08
• Publisher: CNH America LLC, Carol Stream, IL
• Language: English, French and Spanish
• Page count: 3,108
• File format: PDF

Chapters Covered

The catalog is divided into main sections, each expanded into the individual assemblies that make up the machine.

• 00 – Maintenance Parts: fuel filters, engine oil filter, hydraulic oil filter, air filters, cab filter
• Sec. 01 03 / 01 04 – Engine: crankcase, engine oil sump, crankcase covers, cylinder head, cylinder head covers, rocker shaft, intake manifold, exhaust manifold, crankshaft, connecting rod, piston, flywheel, crankshaft pulley, dynamic balancer gears and shafts, camshaft and timing control, injection pump, injectors, injection pump components, injection piping, electronic injection, motor electric installation, fuel filter, fuel piping, turbocharger, engine oil dipstick, oil pump, engine oil filters, engine oil piping, heat exchanger, water pump, cooling system, thermostat, water pump control, fan drive, accessory engine, alternator, engine hooks
• Sec. 02 – Fuel Tank, Muffler, Radiator, Air Cleaner, Chassis: fuel tank and related parts, fuel pipe, fuel filter breakdown, muffler and extensions, exhaust tube, air cleaner and hoses, frame (center pivot)
• Sec. 03 01 – Transmission: torque converter components (2WD Power Shuttle), gearshift outer components, gearshift hydraulic components, parking brake, transmission gearing speed gear, front transmission shaft, gearshift gear drives, 4WD torque converter and gearshift gear drives, rear drive shaft gears, oil dipstick and top up, transmission external shifting controls, front and rear transmission shaft, transmission oil cooling pipes
• Sec. 04 – Front Axle: front axle (2WD), steering assembly and front hubs (2WD), power steering hydraulic system, 4WD front axle housing, bushings and supports, swivel housing and steering cylinder, hubs, ring gear and pinion assembly, differential, articulated axle shaft
• Sec. 05 – Rear Axle: rear axle (Power Shuttle, center pivot), differential lock assembly and engagement, rear axle bevel gear set assembly, differential control
• Sec. 06 – Electrical: frame rear harness and ground cable, battery lock-out switch and ground wire, engine harness
• Sec. 07 – Slides Valves / Hydraulic Systems: hydraulic oil reservoir, hydraulic pump (35+35-154L/MM), pump oil delivery pipes, control valve delivery pipes, pressure intake pipes, control valve discharge pipes, return to tank pipes, oil filter and check valve pipes, loader attachment cylinder pipes, swing cylinder pipes, backhoe attachment cylinder pipes, backhoe boom cylinder pipes, rotation plate hose clamps
• Sec. 08 – Body & Hood: grid and accessories, guard and accessories, door lock kit, lock plate assembly, tipping guard hinge kit, tipping guard assembly components, cab screen, cab fasteners
• Sec. 09 01 – Loader: arms and joints, loader cylinder, loader bucket control cylinder, lift cylinder and bucket pipes, self-leveling linkage, stabilizer cylinders, pipes for stabilizer cylinders, return to dig sensor, swing cylinders, cylinders and rotation plate, front control valve support and transmissions, distributor valve support
• Sec. 09 03 – Backhoe: rear attachment transport lock tie rod and cable, swing post assembly, bushings and pins, swing post pins and transport lock hook
• Sec. 11 – Wheels: front wheels (2WD), driving wheels (4WD), rear wheels, tyre sizes and rim data
• Sec. 18 – Variation / Optional Equipment: stabilizer control with and without auto-up, single and double battery, air intake cap and pre-cleaner, shovel and rear lifting hooks, rear mirror, front counterweights, loader control valves, proportional control valves, pilot control valve supports, tower assemblies, backhoe control valve sections, pilot valves, A/C and heater groups, buckets, stabilizer feet, seats, lamps, beacons, quick-couplings, hammer systems, telescopic dippers and tool kits

Read as a whole, the book gives a technician or parts interpreter the complete bill of materials for the machine rather than a single system. Engine internals, the torque converter and gear train, both axles, the hydraulic distribution network, the cab and operator platform, the loader and backhoe arms, and every factory option are all documented at component level, with the applicability rules that decide which version of a part belongs on a given machine.

How the Figures and Parts Lists Are Organised

Each page carries a figure number, a sequence code, a page number within that sequence and a printing date. The exploded view uses numbered call-outs that correspond to the REF column of the parts list below it, so a component can be traced from the illustration straight to its part number. The list columns give the reference number, the function number (FN), the part number, the year or serial applicability (YR/SN), the quantity and the description.

Applicability is stated precisely where it matters. Entries may read Before 01/85, From 01/85, BTW 01/85 & 02/02, BSN JJC0268800 or ASN JJC0268800, letting you confirm a part against the machine’s production date or serial number before ordering. Quantities appear as a figure, or as AR / X where the amount depends on the build. A bracketed number in the list means the item is not available as a service part in that market, and NSS marks components not serviced separately.

Kits are handled the same way. Repair kits, seal kits, gasket sets and conversion kits appear as their own part numbers, and where a kit contains several items the individual components are listed underneath so you can see exactly what is in the bag before you buy.

Engine Group Coverage

The engine section works from the bare cylinder block outward: cylinder block assembly, plugs and dowels, the oil sump and its gasket, the front and rear crankcase covers, the cylinder head with valves, springs, seats and head gaskets in more than one thickness, the rocker shaft assembly, the intake and exhaust manifolds, the crankshaft with thrust washer and main bearing sets in standard and undersize options, connecting rods and bearings, pistons and ring sets, the flywheel and ring gear, and the crankshaft pulley.

From there the catalog moves to the timing and balance side – camshaft and timing control, dynamic balancer, idle gears and shafts – then to fuel and air: injection pump assembly and its internal components, injectors, injection piping, the electronic injection sensors and module, fuel filter housing and piping, turbocharger and exhaust manifold. Lubrication and cooling close the section with the oil pump, oil filter, engine oil piping, heat exchanger and oil cooler, water pump, thermostat, cooling system plugs, fan drive and accessory drive.

Transmission, Axles and Driveline

Both 2WD and 4WD Power Shuttle transmissions are broken down separately, which matters because the internal gear trains differ. The catalog lists the torque converter, transmission housings, the pump and sealing rings, the clutch plate and piston stacks, the gear sets with their individual tooth counts, the shafts, the synchronisers and sleeves, the shift rails and forks, the parking brake valve, coil and lever, and the hydraulic control block with its tubes and filter head.

The front axle pages cover the 2WD beam, the steering assembly, tie rods and ball joints, the 4WD housing and bushings, the swivel housing and steering cylinder, the hubs with ring gear and planetary gears, and the ring gear and pinion set with its shim and spacer options. The rear axle pages document the axle housing, planetary gears, the differential lock assembly with its brake discs and pistons, the bevel gear set assembly and the differential control linkage.

Hydraulics, Loader and Backhoe

The hydraulic section is one of the largest in the book. It documents the oil reservoir with its level gauge, filler cap, filter and anti-skid strip, the hydraulic pump, and then the pipework in numbered groups: pump oil delivery, control valve delivery, pressure intake, control valve discharge, return to tank, and the oil filter and check valve circuit. Further groups follow for the loader attachment cylinders, the swing cylinder, the backhoe attachment cylinder and the backhoe boom cylinder, plus the rotation plate hose clamps.

IMAGES PREVIEW

Loader coverage includes the lift arms, links and conrods, the loader cylinder, the bucket control cylinder, the lift cylinder and bucket pipes, the self-leveling linkage for the loader controls and loader arm, the stabilizer cylinders and their pipes, and the return to dig sensor. Backhoe coverage includes the swing post assembly with its bushings and pins, the transport lock tie rod and cable, the swing cylinders, the rotation plate, and the long and short dipper assemblies including the telescopic dipper versions with their hydraulic cylinders.

Optional Equipment and Attachments

A substantial variation section documents the factory options so the catalog stays valid across the whole build range. Included are the stabilizer control with and without auto-up and its joysticks, single and double battery installations with cables and brackets, air intake cap and pre-cleaner options, shovel and rear lifting hooks, rear and cab mirrors, front counterweights, loader control valves in two and three section form with their intake, boom and bucket sections, proportional control valves in six and seven section versions, pilot control valve supports and tower assemblies, backhoe control valve sections for boom, swing, bucket, dipperstick and stabilizer, pilot valves for the right and left hand levers, and the A/C and heater housing, blower, coils, control panel and console ducts.

Attachments are listed with their wearing parts: backhoe buckets from 12 inch to 36 inch with pin teeth, extra heavy duty buckets, ditch cleaning bucket, 4×1 and 6×1 buckets with blade or teeth, standard buckets with forks, reversible stabilizer feet, ground stabilizer feet and the tool kit.

Operator Platform, Cab and Electrical

The operator platform pages cover the ceiling light, ROPS instruments and gauges, back-up alarm, cab roof harness, fuse box control unit, ignition switch and power point, fuse panel and side console harness, front harness and control unit, front dash, cab electric system components, windscreen wipers and reservoir, radio antenna and speaker cover, lamps and lights for both ROPS and cab, cab frame and door, front and side glasses with their seals and fasteners, rear fenders, door components, flame trap seal, rear glasses and hinges, soft trim, floor covering, rear console, dashboard, heater water hoses, brake pedal and pump, parking brake lever and control cable, transport lock control, electronic accelerator control, steering column, forward and reverse lever, stabilizer controls, closing pins and plugs, and the information and model identification decals.

Why This Parts Catalog Is Worth Having

Guessing a part number on a backhoe loader is expensive. A transmission that looks identical between a 2WD and a 4WD Power Shuttle machine can take completely different clutch plates, and a hydraulic hose that fits one build will not fit another once the optional valve sections change. This catalog removes that risk because the applicability columns and the variation section tell you which number belongs to which machine configuration.

With the New Holland B95B Tier 3 Backhoe Loader Parts Catalog 87659788 NA on hand you can identify a component from the exploded view, confirm the part number, check whether it applies to your serial number or production date, and see the quantity required before you place an order. That covers routine service items through to a full transmission or axle rebuild, and it covers the attachments and options that a plain workshop manual leaves out.

Delivery is instant. The file is a PDF that downloads immediately after checkout – no shipping, no waiting for a printed book. Keep it on a laptop in the workshop, on a tablet at the machine, or print the pages for the assembly you are working on and take them with you. Because it is a digital file you can search and jump between sections rather than handling a 3,000 page paper binder, and you can reprint any page that gets oily.