SANY STG265C-10 Motor Grader Parts Book – Illustrated Parts Catalog PDF

Description

SANY STG265C-10 Motor Grader Parts Book

This is the full illustrated parts book for the SANY STG265C-10 motor grader, published in a 652-page PDF built around exploded line-art views and matching part tables. Every assembly in the machine is broken down into callout-numbered illustrations, and each illustration is paired with an index table listing the part number, description, quantity required and the page where that part or sub-assembly is detailed further. If you need to identify a component, confirm a part number before ordering, or work out how many of a fastener or seal a rebuild will take, this is the document you go to.

File Details

• Manual type: Illustrated Parts Book / Parts Catalog
• Brand: SANY
• Model: STG265C-10 Motor Grader
• Language: English
• Page count: 652 pages
• File format: PDF
• Document date shown: 2023-08-01

How the Parts Book Is Organised

The book opens with a short preface explaining its purpose: it provides the illustrations and parts listings required to properly identify and order replaceable parts on the machine. Each assembly chapter then follows the same layout, and once you understand it the whole book becomes fast to navigate.

• Exploded illustration page — line-art drawing of the assembly with numbered callouts pointing at each component.
• Index table page — the matching list with INDEX (callout number), PART NO., DESCRIPTION, QTY and SEE PAGE columns.
• Sub-assembly drill-down — where a numbered item is itself a rebuildable assembly, the SEE PAGE column points to the page where that assembly is exploded in turn.

That last column is what makes the SANY STG265C-10 parts catalog genuinely useful rather than just a picture book. You can follow a single component from the machine overview right down through each level of sub-assembly until you reach the individual bearing, O-ring, bolt or seal you actually need to order.

Chapters Covered

• Group 1 — STG260C-8S3 Motor grader main body (machine overview, front counterweight, wheels, frame, operator station, air conditioning, fuel tank, power system, transmission, hood, electrical, shovel, scarifier, rear axle, pedal, hydraulic system, front axle, harness)
• Group 2 — Front Counterweight Assembly (threaded cover, bolts, washers)
• Group 3 — Wheel assembly (tire, wheel rim)
• Group 4 — Frame component (front frame, front frame cover assembly, pipe clamps, rear frame, mounting plates)
• Group 5 — Operating device (towing frame, slewing bearing, rotary ring, dust-proof loop weldment, ball seat, shovel support)
• Group 6 — Worm reducer (housing, turbine, gear, friction plate group, Belleville spring, ratchet wheel, pressure relief valve, oil seals)
• Group 7 — Swing Support Assy
• Group 8 — CABIN (driver cab assembly, control box panel, warning lamp, mounting hardware)
• Group 9 — Working operation device (joysticks, forks, knobs, bearings, control console, multiway valve installation)
• Group 10 — Operator Station mounting parts (driver seat and its sub-components, armrest box, seat support, ladder, footboard)
• Group 11 — Air conditioning system (compressor, evaporator, condenser assembly, blower, heater water tank, hoses, sensors, brackets)
• Group 12 — Fuel Tank Body (tank weldment, cover plates, O-rings, liquidometer gauge, lock)
• Group 13 — Power system assembly (diesel engine body, cylinder block, front end cover, lifting brackets, clutch system, gear housing, oil suction pipe, oil pan, dipstick, cylinder head, gear chamber cover, engine electrical system, engine management system, engine harness, cranktrain, crankshaft, TVD, conrod, piston assembly, flywheel, cooling system, oil module, thermostat, water circulation pump, connecting pipe, fuel system, high pressure pump, fuel filter, common rail, fuel injector, gear system, idler parts, PTO parts, breather system, lubrication system, oil pump, oil pipes, oil centrifuge, turbocharger oil pipes, air inlet system, intake manifold, rocker arms, valve train, accessory belt drive, alternator, fan bracket, exhaust system, exhaust manifold, supercharger, engine installation, fuel water separator, oil-water separator, cooling system, air intake and exhaust system, air filter, exhaust system)
• Group 14 — Transmission Assy (oil filling pipe, double-variable assembly, brackets, hoses)
• Group 15 — Hood assembly (tail cover weldment, switch plate, limit blocks, door rod welding, net plate, door locks, working light supports, armrests, central pillar, side plates, guards, front doors, wind boards, seals)
• Group 16 — Electromechanical air level system (side control box electrical assembly, work station, handrail box electrical assembly, ignition switch, left switch group, electric control cabinet assembly, work lights, headlights, taillights, camera, buzzer, level sensor, angle sensor, batteries)
• Group 17 — STG260 Mine Grader harness Assembly (controlbox harness, front console harness, left and right frame harness, front frame harness, rear light harness, power harness)
• Group 18 — Shovel (moldboard main body, moldboard weldment, blades, side cutters, screws, cylinder seat, dash boards)
• Group 19 — Scarifier main body (5-tooth) (scarifier cylinder, steel tube assembly, balance valve, fittings, tie-rod assembly, big ripper shank assembly, tooth carrier)
• Group 20 — Rear axle assembly (axle, balance box, wet brake assemblies, carrier assembly, differential case assembly, slew bearing and planetary assembly, steel tube assemblies)
• Group 21 — Pedal (mounting seats, pedals, protective covers for brake pipes)
• Group 22 — Hydraulic system (steering system piping, cylinder assemblies, steering cylinders, front wheel inclined oil cylinder, balanced valve installation, bucket arm cylinder, shovel angle change-over cylinder, shovel swing cylinder, lock pin oil cylinder, shovel poppet cylinder, operation hydraulic pipeline diagram, oil collection block, pressure oil filters, high pressure filters, fan hydraulic line, cooling fan control valve block, fan pump, fan motor, brake hydraulic pipeline, front stand steel tube assembly, brake valve assembly, priority valve assembly, double way liquid charging valve, working pump assembly, centre swivel joint, steering assembly, hydraulic steering gear, steering cylinder distribution valve, accumulator component, diaphragm accumulator, rotary motor assembly, cycloid motor, lock pin control valve)
• Group 23 — Front axle assembly (left and right wheel inclination angle knuckles, steering knuckles, wheel hub spindles, bearings, steering pull rod, left and right ball joint assemblies, bridge frame, main pin shaft, cylinder pin shafts, oil seals)
• Group 24 — Electrical harness assembly (emergency stop button box harness)

Beyond the chapter structure, the SANY STG265C-10 parts book gives you a complete fastener and sealing-element breakdown as a by-product of its assembly-by-assembly format. Every bolt, washer, nut, cotter pin, retaining ring, O-ring, oil seal, dust ring, guide ring and seal ring appears in the index tables with its own part number and quantity, which means a full reseal or a full nut-and-bolt replacement on any assembly can be planned straight from the book. The hydraulic chapters are equally detailed: cylinder assemblies are exploded right down to guide sleeves, pistons, clipping keys, rod assemblies and seal kits, and the pipeline diagrams list every hose, hose assembly, elbow, tee, straight connection, adapter, bulkhead fitting, plug screw and pressure-measuring connector.

Why a Genuine Parts Breakdown Matters

SANY builds the STG265C-10 around a large number of sub-assemblies that share generic descriptions — the rear axle alone carries several separate wet brake assemblies and multiple bolt-and-washer groups with different part numbers, and the hydraulic system repeats the same pressure oil filter and high pressure filter in more than one location. Ordering by description alone is a quick route to the wrong part. This parts book removes that risk by tying every component to a specific callout number on a specific illustration, and by giving you the quantity used per assembly so you order the right count the first time.

What This Parts Book Lets You Do

• Identify any replaceable component on the STG265C-10 from an exploded diagram rather than guesswork.
• Confirm the exact part number before placing an order with a supplier.
• Check the quantity required for a full assembly rebuild — fasteners, seals, bearings and shims included.
• Follow sub-assemblies down through multiple levels to reach individual internal components.
• Plan hydraulic hose and fitting replacements from the pipeline diagrams.
• Cross-reference filter elements, seal kits and wear items by their own part numbers.
• Support engine-side work using the detailed power system breakdown covering cylinder block, cranktrain, valvetrain, fuel system and cooling system.
• Work confidently on the front axle, rear axle, scarifier, shovel and operator station using the same callout-and-table structure throughout.

Delivery

IMAGES PREVIEW

The SANY STG265C-10 Motor Grader Parts Book is delivered as an instant PDF download — no shipping, no waiting, no physical book to keep track of in the workshop. Open it on a laptop, tablet or phone at the machine, print the specific illustration and index page you need for the job at hand, and keep the rest of the catalog clean. Because it is a single searchable-by-page PDF, you can jump straight to the group you need and work through the callout numbers in order.