Scania DC09 070A Engine Parts Catalog PDF – Serial 6680346 (18905)

Description

Scania DC09 070A Parts Catalog – Serial 6680346

This is the parts catalog for the Scania DC09 070A engine, built around engine serial number 6680346 and issued under document reference 18905. It is a working parts reference: every assembly is shown as a numbered exploded illustration, and each number is tied to a part number, quantity, remark code and description so a specific component can be identified and ordered without guesswork. The catalog also carries coverage that extends across the DC09/13 engine family, with section headings and part groups that reference DC09A, DC13, DI09M, DI13M and DC09/13A variants throughout.

File Details

• Manual type: Parts Catalog
• Brand: Scania
• Model: DC09 070A
• Engine serial number: 6680346
• Document number: 18905
• Language: English
• Page count: 206 pages
• File format: PDF
• Document date shown: 06.05.2023

Chapters Covered

• 0 General – Coolant, Engine oil, Chemicals, Maintenance kits (XPI, Basic)
• 1 Engine – Cylinder head, Rocker cover, Cylinder block, Front cover, Flywheel housing, Timing gear plate
• 1 Engine – Crankcase ventilation, Oil sump, Crank mechanism, Piston, Balance shaft unit
• 1 Engine – Timing gear, Dipstick, Turbocharger lubrication, Oil pump, Centrifugal oil cleaner, Oil cooler, Oil filter housing
• 1 Engine – Exhaust manifold, Turbocharger, Solenoid valve / wastegate valve, Intake manifold, Engine suspension
• 1 Engine – Power take-off (flywheel housing, SAE A / SAE B, cover), Labels and decals
• 1 Engine – Conversion kit, Repair kits, Gasket kit, Cylinder liner shims, Piston and cylinder liner kit
• 2 Cooling system – Charge air pipe, Temperature-controlled fan, Fan fitting parts, Thermostat housing, Coolant pump
• 2 Cooling system – Bleed pipe, Flange pipe, Belt transmission (coolant pump, temperature-controlled fan)
• 3 Fuel and exhaust system – Accumulator, Feed pump / high pressure pump, Unit injector, Fuel filter unit, Fuel pipes
• 3 Fuel and exhaust system – Fuel filter / water separator prefilter, Connection tubes, Exhaust compensator and bellows, Silencer and SCR catalytic converter
• 3 Fuel and exhaust system – Reductant doser, Hydrolysis catalyst converter, Evaporator, Reductant tank, Reductant pump, Pipes and hoses
• 3 Fuel and exhaust system – Cable harness ECU SCR, Reductant tank suspension, Conversion kit fuel filter, Repair kit filler cap
• 10 Pneumatic system – Exhaust brake (pneumatic and hydraulic), Conversion kit cable harness
• 13 Hydraulic pump – Mounting, without hydraulic pump
• 16 Electrics – Junction box (Coordinator, main supply box), Alternator and mounting, Starter motor
• 16 Electrics – Electronic control unit (S8), Cable routing, Cable harness EMS injection system, Junction box cable harness
• 16 Electrics – Electrical cable, Contact housings (ECU S8, SCR, 2-12 pol, kits), Cable terminals and connections
• 18 Canopy – Compressor mounting and compressor

What this catalog actually gives a technician is identification rather than instruction. There are no repair procedures here and no torque sequences – instead, each system is broken down into its constituent assemblies and every assembly is drawn in exploded form with position numbers. The cylinder head group alone runs through valve guides, valve seat inserts, valve springs, spring collars, split collets, rocker arms, adjusting screws, valve bridges and the cylinder head gasket, each with its own part number and remark column. The crank mechanism group does the same for connecting rods, big-end bearing shells across standard and four oversize steps, the crankshaft, torsion damper, flywheel and ring gear. The fuel and exhaust sections carry the XPI injection hardware, the SCR and reductant hardware, the exhaust brake, silencer and catalytic converter groups in the same format.

How the Catalog Is Organised

Sections are numbered in a two-level system – for example 01-01-6000 for the XPI cylinder head, 01-10-6003 for the piston, 02-25-6002 for the coolant pump, 03-26-6307 for the SCR reductant pump, 16-15-6000 for the S8 electronic control unit. That numbering makes it possible to move straight to a system group instead of scanning the whole file. Serial-number and engine-variant breaks are printed above many tables, so parts that only apply to a particular build range are flagged rather than left ambiguous.

Several tables carry remark codes that matter when ordering. usz indicates oversize, nss marks a part not sold separately, rq flags a required quantity, and assy identifies an assembly. Repair kits and gasket kits are listed as their own top-level entries – the oil pump repair kit, the oil filter housing repair kit, the oil mist separator repair kits for open and closed crankcase ventilation, the cylinder head gasket kit and the piston and cylinder liner kit – so consumable and seal sets can be found without hunting through every sub-table for individual O-rings.

Who This Parts Catalog Is For

This file suits anyone who needs to put a part number on a Scania DC09 070A component rather than diagnose it: workshops rebuilding an engine, parts desks building a quote, fleet maintenance staff raising an order, and owners who want to check what is actually inside a group before committing to a repair. It is equally useful when a machine has been assembled from mixed variants, because the variant and serial-number notes let you confirm which of two or three similar parts belongs to engine 6680346.

The electrical and SCR material deserves a particular mention. The catalog includes the junction box groups, the EMS injection system cable harness with its component codes, the SCR ECU cable harness, the electronic control unit adapter plate and cover hardware, and a long contact-housing section covering ECU codes 1 through 14, the SCR connectors, and the smaller 2-pole, 3-pole, 4-pole and multi-pole housings with their wedgelocks, boots, seals and cable terminals. For anyone rebuilding a loom or replacing a damaged connector, that is the part of the file that saves the most time.

Buy the Scania DC09 070A Parts Catalog

With the Scania DC09 070A engine parts catalog for serial 6680346 open on screen, the job in front of you becomes concrete: identify the assembly from the exploded view, read the position number, pull the matching part number and quantity, and order the right component the first time. That matters because engine hardware is rarely forgiving of a wrong bearing shell size, a mismatched gasket, or a connector housing that physically fits but is coded for a different circuit. Getting the number right at the desk is cheaper than getting it wrong at the bench.

Delivery is immediate. The file is a PDF, so it arrives as soon as payment clears – no shipping, no waiting on a courier, no physical binder to lose. Open it on a laptop in the workshop, a tablet beside the engine, or a phone on the shop floor, and print whichever exploded views and parts tables you need for the job at hand. Because every page is a self-contained parts group, printing a single section is practical rather than wasteful.

IMAGES PREVIEW