Skyjack SJIII 3220 3226 4620 4626 4632 DC Electric Scissors Parts Manual 2019 PDF

Description

Skyjack SJIII DC Electric Scissors Parts Manual – Document 165974AJ

This illustrated parts manual covers the Skyjack SJIII 3220, SJIII 3226, SJIII 4620, SJIII 4626 and SJIII 4632 DC electric scissor lifts. Every serviceable assembly on these machines is shown in an exploded drawing with numbered callouts, and each callout maps to a parts list giving the Skyjack part number, the quantity required and the item description. That layout is what makes the book usable at the bench: find the assembly, match the callout number in the drawing to the row in the table, order the exact component.

One detail matters before you order anything. These scissor lifts were built in two control configurations and the parts differ between them. Machines carrying the MC label on the side of the machine or on the platform control box are motor controller machines, and their specific parts and assemblies are collected in Section 10 – Appendix A. Machines without that label are hydraulically proportional and use the assemblies listed in Sections 1 through 9. Confirm which machine you have before pulling a part number.

File Details

• Manual type: Illustrated parts manual
• Brand: Skyjack
• Models covered: SJIII 3220, SJIII 3226, SJIII 4620, SJIII 4626, SJIII 4632
• Machine type: DC electric scissor lifts
• Document number: 165974AJ
• Edition: 2019
• Language: English
• Page count: 217 pages
• File format: PDF

Chapters Covered

• Section 1 – Platform Related Parts: entrance gates and chains; gate latch assembly; rigid side railings; hinged side railings; extension platform railing assembly; extension handrail; quick release pins; main platform assembly; extension platform assembly; extension cylinder mounting hardware; extension cylinder assembly; powered extension hose connections for 3220/4620 and 4626; platform control console assembly; enable controller assembly; powered extension platform cables; extension platform harness; extension platform control console; control cable assemblies; platform AC outlet
• Section 2 – Scissor Related Parts: scissor stack assembly for 3220/4620, for 3226/4626 and for 4632; scissor stack mounting hardware; scissor stack connecting hardware; limit switch assembly; lift cylinder and mounting hardware; holding valve assembly for 3220/4620 and for 3226/4626/4632
• Section 3 – Base Related Parts: base assembly; pothole protection device; brake assembly; wheel assembly; tie rod assembly; steer cylinder assembly; pin brake cylinder assembly; rear drive manifold assembly; brake release manifold assembly; front hub and spindle assembly; hydraulic hose connections for pin brake; hydraulic hose for disc brake; base control console; base control console – B
• Section 4 – Hydraulic Tray Related Parts: hydraulic/electrical tray assembly; main manifold assembly; pump and motor assembly; proportional manifold assembly; hydraulic hose connections on the hydraulic/electrical tray
• Section 5 – Battery Tray Related Parts: battery tray assembly; Delta-Q battery charger; Signet battery charger
• Section 6 – Electrical Related Parts: electrical panel hardware assembly; electrical panel hardware assembly (EE-rated); main manifold harness; rear manifold harness; horn, flashing light and tilt switch harnesses; holding valve, charger cutout and pressure switch; electrical panel Powerdeck modification; Elevate telematics harness
• Section 7 – Optional Equipment: 24VDC inverter assembly; inverter assembly; air hose to platform assembly; work light option; flashing amber light option; dual flashing amber light option; light duty pipe rack; black logo labels for the 4626; board carrier; tool caddy; heavy duty pipe rack assembly; Elevate telematics; secondary guarding lift enable kit
• Section 8 – Labels: label kit; platform control console labels; miscellaneous labels; chassis left and right side labels; chassis front and top labels; rear scissor and platform labels; rear chassis labels
• Section 9 – Fluids: fluid table
• Section 10 – Appendix A – Motor Controller: platform control console assembly; platform control box top; enable controller assembly; hydraulic/electrical tray assembly for welded tank; hydraulic/electrical tray for welded tank; hydraulic/electrical tray assembly for plastic tank; hydraulic tank lid assembly for welded tank; hydraulic tank lid assembly for plastic tank; motor/pump assembly for plastic tank; main manifold assembly for welded tank; main manifold assembly for plastic tank; hydraulic hose connections for welded and plastic tanks; electrical panel, hardware and wire kit; RST wire assemblies; main manifold harness; rear manifold harness; charger, horn, flashing lights and tilt switch harnesses; control cable assemblies; Powerdeck conversion kit for motor controller

What This Skyjack Parts Manual Gives You

Parts manuals live or die by whether the drawing actually shows the part you are holding. This one is built around that idea. Each assembly is drawn in disassembly order, so the sequence in the illustration mirrors the sequence you would follow taking the machine apart. Individual parts carry a reference number in the drawing and the same number in the table beside it, alongside the Skyjack part number, the quantity needed and a description written noun-first so the item reads the way it is spoken in a parts department.

The listing structure also handles machine variation properly. Assemblies at the start of a parts list can be identified with a reference letter – A, B, C and so on – to mark different configurations, and individual parts below them carry the matching letter to show which configuration uses them. A part with no letter is used across all of them. Bullets show the parent and child structure, so a subcomponent of a subcomponent sits one level deeper than its parent. Where a quantity is marked AR, it varies with how the machine is optioned and should be ordered as needed.

Serial Number Coverage

The manual is written against the following serial number ranges:

• SJIII 3220: 60 004 189 to 60 999 999
• SJIII 3226: 27 017 551 to 27 999 999
• SJIII 46XX: 70 017 596 to 70 199 999

Appendix A, the motor controller section, applies from these serial numbers onward:

• SJIII 3220: 60 004 852 and above
• SJIII 3226: 27 021 943 and above
• SJIII 46xx: 70 021 720 and above

Skyjack directs owners of other serial numbers to the Skyjack website for the relevant documentation.

How the Manual Is Organised for Ordering

When you have the drawing and the part number, the manual’s foreword sets out the ordering convention the parts department expects: address orders to your Skyjack dealer, quote the model and serial number from the serial number plate, give the quantity needed, give the length if the item is a bulk item, and quote the part number and description exactly as printed. Billing and shipping details and the best routing come next. Working from the exact part number rather than a description alone is the difference between the right part arriving and a second order being placed.

The optional equipment section matters here too. Inverters, work lights, flashing amber lights, pipe racks, board carriers, tool caddies, air hose to platform kits and telematics are all broken out separately with their own hardware, so an option fitted to your machine can be identified without guessing at generic fasteners. The label section covers the decal kits and individual labels that wear, fade or peel – useful when a machine is being cleaned up for resale or returned to a rental fleet.

Who This Skyjack SJIII Parts Manual Is For

This is a working document for anyone who has to identify and order components for the SJIII 3220, 3226, 4620, 4626 or 4632: fleet maintenance departments, independent lift service companies, rental yards keeping machines in rotation, and owners of a single scissor lift who would rather order the correct part once. It supports platform and railing repairs, scissor stack and lift cylinder work, base and drivetrain service, brake and pothole protection assemblies, hydraulic tray and manifold work, battery tray and charger replacement, electrical panel and harness repairs, and the optional equipment fitted to these models.

Getting the part number right the first time is what keeps a scissor lift out of the yard and on the job. Skyjack states plainly that only Skyjack authorized replacement parts should be used, and a manual that shows the assembly in exploded view with the correct part number against every item is the tool that makes that possible.

IMAGES PREVIEW

The Skyjack SJIII 3220 3226 4620 4626 4632 DC Electric Scissors Parts Manual 2019 PDF arrives immediately after checkout as a downloadable file. There is no shipping, no waiting on a courier, and no physical book to keep track of. Open it on a laptop in the shop, a tablet at the machine or a phone on site, print the pages for the assembly you are working on, and keep the rest of the file intact. Once it is on your device it stays there, ready the next time a part needs identifying.