Solis 75 & 90 CRDI Tractor Parts Catalog PDF – English Illustrated Parts Manual for International Tractors

Description

Solis 75 & 90 CRDI Tractor Parts Catalog – The Full Illustrated Parts Manual

Published by International Tractors Ltd., this is the complete English-language parts catalogue for the Solis 75 CRDI and Solis 90 CRDI tractor range. It is the reference every workshop, dealer counter and parts department uses to identify a component, quote its item code, and confirm which washers, seals, screws and bushes come with it. Each system on the tractor is broken into an exploded assembly drawing with numbered callouts, then matched to a table of item codes, descriptions, quantities, interchangeability notes and remarks. Whether you are rebuilding a rear differential, replacing a clutch shaft, sourcing a hydraulic lift body for a 90 CRDI with the MITA lift and flow control valve, or simply tracking down the correct O-ring for a suction line, the answer sits in this catalog as a real, quotable part number.

File Details

• Manual Type: Illustrated Parts Catalog (Parts Manual)
• Brand / Publisher: International Tractors Ltd.
• Models Covered: Solis 75 CRDI and Solis 90 CRDI — including without-cabin, H-Type AC Cabin and Inhouse AC Cabin variants
• Language: English
• File Format: PDF
• Total Pages: 431

Chapters Covered

• Silencer Assembly
• Cooling System Assembly
• Engine Assembly & Related Parts
• Clutch Assembly & Related Parts
• Gear Box Housing & Related Parts
• Speed Lever & Related Parts
• Rear Differential & Related Parts
• Final Drive Housing & Related Parts
• Brakes & Related Parts
• Rear Cover Assembly & Related Parts
• Operating Sector & Related Parts
• Cab Mounting Assembly & Related Parts
• ROPS Structure Assembly & Related Parts
• Mounted Accessories & Related Parts
• Bonnet Assembly & Related Parts
• Fuel System Assembly & Related Parts
• Brake & Clutch Pedals & Related Parts
• Front Axle Bracket & Related Parts
• Front Axle Beam & Related Parts
• Battery Box Assembly & Related Parts
• Three Point Linkage & Related Parts
• Accelerator Assembly & Related Parts
• Driver Seat
• Stickers
• Front Wheels & Tyres
• Rear Wheels & Tyres
• Front Weights
• Rear Wheel Weights
• Cluster Assembly
• Electricals & Related Parts
• Accessories

Engine, Cooling and Exhaust

The opening chapters handle everything from the exhaust manifold back: the standard muffler assembly for both 75 and 90 CRDI, the down-draft exhaust pipe variant for tractors without a cabin, the inline-type exhaust pipe for cabin models, and the dedicated down-draft exhaust for the H-Type AC Cabin. Each variant is drawn exploded with its gasket, cover plate, spring washers, hex screws and cross-slotted screws laid out and given item codes. The cooling system chapter covers the radiator assembly (90HP and 75HP versions), radiator screen, top mounting plate for the intercooler, air cleaner mounting bracket, fan, spacer and every hose worm clamp. The engine assembly chapter identifies the 90HP CRDI engine (UW4105DC36H1H3C1) and the 75HP CRDI engine (PR4105DD36 H1H3C4105CRDI 75hp), along with the Bosch ECU (EDC 17C53), exhaust elbow, DOC / CATCON assembly, intermediate pipe and all associated gaskets, bolts and nuts.

Clutch, Transmission and Gear Box

This is one of the largest sections of the catalog. The double clutch assembly is documented both as a complete unit and broken into its sub-components — cover housing, main lever kit, PTO lever kit, PTO pressure plate, main pressure plate, diaphragm spring, driven plate assemblies and the ring. Clutch controls list the disc pusher, bearings, sleeves, clutch control fork, levers, split pins and the clutch shaft seals. The gear box housing chapter is a deep one: clutch housing, dipstick assembly, dowel pins, gaskets, control forks, PTO shifter lever, range lever, shuttle lever and lever assembly options — including the variations used on AC cabin tractors. Primary shaft, secondary shaft and idle gear chapters show the synchronizer kits, gear tooth counts (Z=27, Z=34, Z=37, Z=49, Z=52/33, Z=55, Z=43, Z=36/36) and bearing / shim arrangements, with 12+12 transmission-specific parts called out separately so you never order the wrong gear.

Gear Shift, Speed Lever and PTO Controls

The speed lever cover, outer gear shift levers, speed gear inner controls, reverser inner controls, range gears inner controls and PTO control are grouped here. Every fork, rod, block, lock pin, ball, spring, washer and lever is listed with its item code — critical when you are chasing a worn 3rd-4th fork or a missing detent spring. The PTO control section covers the PTO lever, control fork, control pin, ball, sliding block and PTO selection plate, giving you everything needed to service the PTO engagement system on either model.

Rear Differential, Final Drive and Brakes

The rear differential chapter is exploded in detail — thrust washers, shaft, differential kit, differential box, roller, sleeve, bearings and locking flange all carry their own item codes. Bevel gear sets (Z=12/41 and Z=46/35, Z=52), the drop box transmission (gears Z=13, Z=60, shaft, sleeve and 4WD oil seal) and the PTO output shaft / PTO shaft assemblies are laid out with the kit codes you need. The final drive housing chapter lists the trumpet housing kit, crown gear (Z=70), wheel shafts, planetary carrier, gear (Z=27), half shaft, seal rings and the stud bolts. The brakes chapter covers the brake mechanism, brake disc (10 off per side), counter-plate, tie bar, springs, balls, nuts and the brake control shaft with its levers, pins and cotter pins. Handbrake controls round out the section with the handbrake levers (LH, RH, and a plain version), rod, brake rod pins and elastic rings.

Hydraulics, Lift and Operating Sector

Hydraulic coverage begins with the Liftomatic assembly — the MITA hydraulic lift is listed with the liftomatic switch, cover, cable assembly, cable holding clamp, breather and mounting hardware. The suction and delivery line chapters document the hydraulic filter, adapter, hoses, magnetic strainer, vibration dampers and clamps, including the variant with hydraulic trailer brake lines. For 90 CRDI models fitted with the MITA lift with flow control valve (part 10085928AA), there is a dedicated rear cover assembly chapter listing the pre-assembly body, relief valve kit, closing flange, bushes, MITA bushes and the hydraulic lift seal kit — every one of them a child part of the 10085928AA assembly so you can drill down to the exact component. Lift body assembly, cylinder assembly, support top link assembly, control lever assembly, control valve assembly and internal lever assembly all appear as their own exploded views with child part codes, grease nipples, O-rings, roll pins and seals.

Cab Mounting, ROPS and Cabin Interior

Cab mounting covers the structure assembly, mounting brackets (LH and RH), hex bolts and the rubber pads for tractors without a cabin. The ROPS structure assembly is exploded with the upper structure, hex head bolts, punched washers, spacers, pivot pins and the safety pin, plus the ROPS data plate. The mounted accessories chapter groups the starter motor and hydraulic pump cover, FIP cover, tool box assembly, rear view mirrors, revolving light, SMV emblem, plough lamp and their mounting hardware. Cab interior assembly is broken out further into floor mats (front, LH, RH), fender side covers, closing caps, grommet for gear shift, and the steering column tilt / telescopic assembly.

Bonnet, Dashboard and Front Mesh

The bonnet chapter covers the bonnet assembly in unpainted, blue-paint and red-paint versions, bonnet beading (with and without AC cabin), bonnet lock, threaded rod for lock, bonnet emblem, gas springs for the ETRAC 90 and the key set assembly. Dashboard assembly is exploded into upper, mid and lower sections with the sealing cover, dashboard cover and all the small fixings. Front mesh assembly covers the front mesh, headlamp frame (LH / RH), headlamp foam, SOLIS logo and mesh mounting hardware — critical when reconstructing the front end after a knock.

Fuel System, Pedals and Controls

The fuel system assembly documents the fuel tank assembly (including the AC cabin and 100HP version), front and rear mounting straps, fuel tank safety plate, rear mounting plate, rubber buttons, fuel tank drain plug, fuel cap, rear filling pipe assembly, hose and clamps, and the fuel filter strainer and fuel pipes. Brake and clutch pedal sections cover the clutch pedal assembly, clutch wire, brake cable assembly, the modified brake arrangement (actuator assembly, brake pedal shaft, adjustable brake tie rods, link pins), plus the IPTO clutch wire, parking brake cable and the various pins and circlips that hold the pedal cluster together.

Front Axle and 4WD Components

Front axle coverage splits between Carraro 4WD beam tractors (10080814AB and 10080814AE) and Inhouse-beam models. You get the front axle bracket for 4WD, mud guard, axle housing, front support, bushings, V-ring, spherical bearings, differential support, swivel housings and steering cylinder with its cylinder head, rod, seal kit and bushings. The bevel gear set chapter lists Z15/32 and Z=12/41 gear sets, shims from 2.50mm up to 3.40mm, ring nut M35X1.5 and the collapsible spacer. Differential, double U-joint, wheel hub (with crown gear Z=60, studs, lockrings, wheel carrier) and final reduction (planetary carrier, gear Z=23, thrust washers, snap rings) round out the section. The Inhouse beam chapters separately list the STG cylinder mounting with axle assembly, planet carrier RH and LH, wheel hub sub-assemblies, reduction gear (planetary), wheel carrier – axle assembly, wheel carrier RH and LH sub-assemblies and the universal joint assembly.

Battery Box, Three Point Linkage and Rear Attachments

Battery box and foot step sections cover the battery box assembly, battery box and foot step (with the H-Type AC cabin variant), mounting brackets, rods, thumb screws and linch pin. The three point linkage chapters distinguish between 2500kg and 3000kg systems — support plates, stabilizer assembly, top link assembly, tie rods (LH and RH with handle), lower link shaft, bush, locking plate, drawbar, lower link assembly and pin support. Rear toe hook chapters again split between 2500kg and 3000kg, listing rear brackets, swinging drawbar, linch pins, hex bolts (M20x2.5×67 and M20x2.5×70), spring washers and hex nuts, plus the EEC drawbar and automatic clevis with the slider trailer hitch, quick release coupler, adaptor and PTO guard for the H-Type AC Cabin.

Accelerator, Seats, Stickers, Wheels and Electricals

The accelerator assembly chapter documents the hand accelerator assembly for CRDI, electronic accelerator pedal (CRDI-75), foot pedal assembly, accelerator mounting bracket and the hand accelerator wire. Driver seat chapters cover both the standard and H-Type AC Cabin driver seat assemblies with seat base plates and mounting hardware. The stickers chapter lists every decal on the machine — turbo sticker, E-Mark, draft and position indication, PTO RPM, 4WD, parking brake, fuel, and the full U.S. homologation sticker set. Front and rear wheel and tyre chapters list tyre sizes (12.4-24, 11.2-24, 18.4-30, 16.9-30, 13.6-38, and radial equivalents), rims, tubes, wheel nuts and spring washers, while front and rear weight chapters list the 72kg and 31kg front weights, rear wheel weights and their fasteners. The instrument cluster and electricals chapters cover the cluster assembly, combination switch, hazard warning switch, starter switch, work light switch, revolving light switch, mobile charger socket, engine wiring harness, main relay, grid relay, speed sensor, alternator, battery cables and the battery itself.

Accessories and AC Cabin Sub-Assemblies

The accessories section lists the primary and secondary filter elements, engine oil, tool kit bag (empty), the 10005331AB hand tool kit — with a grease gun, cutter plier, screw driver, D-spanners from 10×11 through 20×22, ring spanners 16×17 and 24×27 — tyre pressure gauge, oil filter and radiator cap. For tractors with the Inhouse AC Cabin, the catalog continues into AC cabin structure, side glass assembly, steering unit, HVAC kit (compressor, condenser, receiver drier, control panel, suction / discharge / liquid hoses, water valve, heater hoses, drain hose, louver), HVAC mounting with AC duct and AC hose, canopy mounting with fresh air filter and air flap assemblies, roof liner, fender covers, rear floor, front and rear floor assembly, dashboard assembly, driver seat assembly, rear glass assembly, door glass assembly, linkages 1 through 4, and compressor mounting with its intermediate pulley, belt, brackets and adjuster screw. The H-Type AC Cabin chapters then add the differential lock pedal assembly, RPDM lever assembly (540 x 1000 RPM), brake system mounting, PTO lever mounting bracket, right and left door assemblies, quarter glass, front glass, passenger seat backrest, forward-reverse gear lever assembly, hydraulic arm mounting, sight glass assembly, floor mat and quadrant covering parts, rear glass assembly, left and right fender assembly, front and rear trapezium assemblies, interior covering parts, battery box assembly, left foot step mounting assembly, passenger and driver seat assembly, mechanism group assembly, seat bottom plate, dashboard, frame assembly, brake pedal assembly, clutch pedal assembly, lifomatic, disassembled assembly, cabin accessories, HVAC kits, registration plate and compressor mounting.

Why This Solis 75 & 90 CRDI Parts Catalog Belongs in Your Workshop

If you maintain, service or repair Solis 75 and Solis 90 CRDI tractors — as a dealer counter, a fleet workshop, an independent mechanic or an owner running your own machine — a parts catalog is the difference between guessing at a part number and quoting the exact one. This catalog puts the full parts breakdown of every major assembly at your fingertips: engine and cooling, clutch and transmission, gear box housing, differential, final drive, brakes, hydraulics and lift, steering, front axle (both Carraro and Inhouse 4WD versions), fuel system, pedals, ROPS, cab mounting, bonnet, dashboard, wheels and tyres, electricals, and the AC cabin sub-assemblies. Each exploded diagram is cross-referenced with item codes, so you can order a single shim, an O-ring, a synchronizer kit or a complete clutch housing without ambiguity.

How You Receive It

IMAGES PREVIEW

The catalog is delivered as an instant PDF download — no shipping, no waiting for a parcel, no photocopied pages arriving in the post. Open it on a laptop in the workshop, a tablet at the counter, or a phone at the machine. Search it, zoom into a diagram, print the page you need and take it straight to the bench. Because it is a PDF, you can keep a copy on every device you own and never worry about losing the one paper copy that matters. If you work on Solis 75 CRDI or Solis 90 CRDI tractors in any capacity, this is the reference that saves the most time — and the most wrong parts ordered.