STILL EGV 10 & EGV 12 Walkie-High Lift Truck Spare Parts Catalogue 4493260 – PDF Parts List

Description

STILL EGV 10 & EGV 12 Spare Parts Catalogue — 4493260

This is the complete spare parts list for the STILL EGV 10 and EGV 12 walkie-high lift trucks — the Mitgeh-Hochhubwagen / Transpalette gerbeur à conducteur accompagnant / Carrello elevatore a forca grande alzata / Carretilla elevadora de gran alcance. Issued under Ident-Nr. 4493260-09-04, this catalogue gives you every assembly group broken down into exploded illustrations with matching part number tables, so you can identify and order exactly the component you need.

Whether you are maintaining a single truck or running a fleet, having the correct STILL EGV 10 EGV 12 parts list on hand stops guesswork at the counter. Each figure shows the part in its true position, and the accompanying table supplies the STILL part number, quantity per assembly, and version notes. The catalogue is multilingual — the section headings and table labels appear in English, German (Ersatzteil-Liste), French (Catalogue de pièces détachées), Italian (Catalogo parti di ricambio) and Spanish (Catálogo de recambio), while the part descriptions themselves are in English.

File Details

• Manual type: Spare Parts List / Parts Catalogue
• Brand: STILL
• Models covered: EGV 10, EGV 12
• Document number: 4493260-09-04
• Language: English, German, French, Italian, Spanish (multilingual)
• Page count: 389
• File format: PDF

Chapters Covered

• 00 — Box Section Frame
• 03 — Gear Drive
• 04 — Wheel
• 05 — Driving Controls
• 06 — Steering
• 07 — Brake
• 08 — Electr. Installation
• 09 — Lighting Equipment and Instruments
• 10 — Hyd. Hose Line
• 11 — Power Unit
• 20 — Upright
• 22 — Fork Carriage
• 28 — Charging Set
• 30 — Label

What Each Assembly Group Contains

00 — Box Section Frame

The foundation of the EGV 10 and EGV 12: hood assemblies, fork frame, Plexiglass protections for Simplex and Tele/NIHO mast configurations with various H1 lift heights, inspection flaps, plug retainers, screws, sleeves, holders, retaining rings, cable harnesses, key switches, emergency switches, charging sockets, and the Digicode option. This is where you will find the parts that make up the truck’s body and operator compartment.

03 — Gear Drive

The complete drive unit including the motor, brake, gearing, hexagon socket head screws, washers, hubs, and the transmission breakdown with its taper roller bearings, ball bearings, grooved rings, O-rings, plugs, lock rings, trunnion screws, magnetic lock, dowel pin, outlet valve and Loctite references. Exploded views show the full transmission assembly for rebuilds and bearing replacement.

04 — Wheel

Drive wheels in rubber, polyurethane, Vulkollan, profiled rubber and antistatic versions, plus single and twin rollers, stabilizer wheels, and the associated holders, screws, washers, bushings, spacers and neoprene elements. This section lets you match the exact wheel compound and roller configuration to your EGV 10 or EGV 12.

05 — Driving Controls

The control handle head assembly with control box, levers, pressure fuse, hexagon socket head screws and washers. Everything that makes up the operator’s primary driving control interface.

06 — Steering

The complete tiller assembly: holder, tiller, clamp, plate, reinforcing section, limit switch, needle bearing, roll pin, oval head screws, spring, spirol pins, axles, levers, screws, nuts and flat head socket screws. The exploded tiller diagram makes reassembly straightforward.

07 — Brake

The complete brake assembly with brake, hexagon socket head screws, hub, brake disc, contact pin and receptacle housing. Essential for safe stopping and parking of the truck.

08 — Electr. Installation

Wiring diagrams and electrical installation breakdowns for EGV 10 and EGV 12 in standard, built-in charger, built-in charger GEL, cold store and cold store built-in charger configurations. Includes horn, relay K1, cable harnesses (standard, cold store, switchboard EGV10 and EGV12), battery leads in DIN 80A, DIN 160A, SBE 160A, SBE 320A and air versions, battery lugs and emergency switch. A dedicated wiring diagram page gives the full electrical architecture.

09 — Lighting Equipment and Instruments

Key switches (standard and Key Metro), hour meter / battery discharge indicator, and rain cap. The instruments that keep the operator informed of truck status.

10 — Hyd. Hose Line

Lift hydraulics for Simplex, Tele and NIHO mast types, plus the hydraulic unit for EGV10 and EGV12 with O-rings, back pressure valves, staying, screws, pump motor, pressure relief, oil pump, flow limiter, tank, bleeding, spacer, suction filter, air intake tube, solenoid valve, plug, bracket and adapter. Hose lines and pipework are shown in exploded view.

11 — Power Unit

The motor and pump motor assemblies including armature, bearings, lock rings, brush yoke ring, carbon brushes, shaft retainer, springs, clamps, screws, rings, discs, washers, nuts, slip clutch and ball bearings. Both EGV10 and EGV12 pump motor variants are covered.

20 — Upright

Complete masts for Simplex 995, 1210, 1460, 1660 and 1860, Tele inner masts 1995, 2425, 2925, 3325 and 3725, and NIHO inner masts in the same lift heights. Includes lift cylinders with detailed seal kits, piston rods, cylinder barrels, bushings, clamps, lock rings, springs, cylinder heads, spacers, nuts, bleeder screws and lowering brake valves. Chain assemblies with chain links, roll pins, washers, nuts, chain locks and axles are listed for every mast variant. This is the most technically detailed section of the catalogue.

22 — Fork Carriage

Lift consoles for Tele/NIHO and Simplex configurations with 564 mm and 524 mm fork widths and 990, 1150 and 1190 mm lengths, plus screen grids in H=800 and H=1000 versions. Rollers, shims, washers, chain locks, nuts, axles, roll pins and hexagon socket head screws are all itemised.

28 — Charging Set

Charging sets for I.E.S. and I.E.S. GEL systems, charging sockets with terminal males, fuse elements (25A and 10A), contact pins, control charts, socket housings, cable guides, shock proof sockets and power cords. Everything needed to maintain or repair the charging interface.

30 — Label

All labels and decals for the EGV 10 and EGV 12: product identification labels, lift height scales for every mast variant, STILL company signs, switchboard and pump unit labels, cold store version labels, charging set GEL labels and battery tray identification labels for various language markets (D/GB/F, GR/NL/DK, E/I/P, FIN/S/N, H/PL/CZ, TR/RUS, MEAUX/F).

Why This STILL EGV 10 EGV 12 Parts Catalogue Matters

Ordering the wrong part for a walkie-high lift truck wastes time and money. This STILL EGV 10 EGV 12 spare parts list removes the ambiguity by showing each component in its exact assembly position with the correct STILL part number, quantity and version note. Whether you are replacing a worn drive wheel, rebuilding a lift cylinder, tracing an electrical fault through the wiring diagram, or simply refreshing the labels on a cold store unit, the catalogue gives you the part reference you need to get the right item first time.

The exploded diagrams are the real strength here — they let you see how the gear drive, brake, steering tiller, hydraulic unit and mast assemblies fit together before you start dismantling. For workshops maintaining EGV 10 and EGV 12 trucks, this is the reference that keeps a repair moving instead of stalled waiting for a part that turns out to be wrong.

IMAGES PREVIEW

Instant PDF Delivery

This STILL EGV 10 EGV 12 spare parts catalogue is delivered as an instant PDF download — no shipping, no waiting for a disc or printed copy. Open it on any device: laptop, tablet or smartphone in the workshop. Print the pages you need for the job and keep the rest on file. With 389 pages of exploded views and parts tables covering every assembly group from box section frame to label, you have the complete STILL parts reference for the EGV 10 and EGV 12 at your fingertips.