Terex Fuchs MHL331 Illustrated Parts Catalog 2011 – Serial 1561 and Up

Description

Terex Fuchs MHL331 Illustrated Parts Catalog 2011 – Serial 1561 and Up

This Terex Fuchs MHL331 illustrated parts catalog is the parts identification reference for the MHL331 mobile hydraulic loading machine, issued on 22 December 2011 under Revision 1.00 and valid for machine serial numbers MHL331110 1561 and up. With more than 700 pages, it documents the entire machine from the diesel engine and hydraulic system down to individual flanges, seals, hoses, and cab trim. Every section pairs an exploded graphic with a numbered parts table listing the Terex part number, description, and quantity for each callout.

File Details

• Manual type: Illustrated Parts Catalog / Ersatzteilkatalog / Catalogue pieces / Catalogo de repuestos
• Brand: Terex Fuchs
• Model: MHL331 mobile hydraulic loading machine
• Serial coverage: MHL331110 1561 – xxxx (serial number 1561 and up)
• Issue date: 22 December 2011
• Revision: 1.00
• Languages: English, German, French, Spanish
• Page count: Approximately 728 pages
• File format: PDF

Chapters Covered

The catalog is organised into twelve top-level chapters, each broken into the sub-assemblies a technician needs when identifying parts for a specific area of the machine.

• 1 – Service Parts (service parts, flanges, straight and elbow flange couplings, corrugated hose holders)
• 2 – Engine And Accessories (diesel engine, head gasket and timing gears, oil pan and dipstick, crankcase breather, oil pump and engine mountings, oil cooler and filters, fan and water pump, fuel pre-heater, fuel pump and lines, fuel pre-filter, turbocharger and injector pump, exhaust pipes, engine wire harness, alternator and belt, fuel hoses and fittings, engine radiator, reversible fan, engine preheater, main hydraulic pump, air intake and exhaust system, air filter)
• 3 – Hydraulic Installation Undercarriage (4-point outrigger, travel drive and gear shift, steering, travel brake and park brake, oscillating axle locking, blade and blade hydraulics, individually operated 4-point outrigger, electrical installation)
• 4 – Hydraulic Installation Uppercarriage (right and left joysticks, steering column, travel brake and cab emergency lower, travel, accelerator pedal, shut off valve, pilot control for driving, stabilizer, boom, dipperstick, gripper, rotating joint, slewing motor 1 and 2, cab lift arm and hose clamps, pressure supply, tank lines, priority valve, cab lift, control blocks, grab rotation, hydraulic motor oil cooler, cooling circuit, reversible fan for oil cooler, control block to rotating joint, control block to slewing motor, control block to working equipment, control block and main hydraulic pump and tank)
• 5 – Electrical Installation (cab floor, engine surroundings, central area, cable kit for valves, power supply, central electrical system, generator installation 11 kW and 13 kW, undercarriage)
• 6 – Undercarriage (4-point outrigger, blade, scraper bars, axles and travel gear and travel motor, park brake, travel motor piece parts, wheels and solid tires, tool box, tools, front axle, brakes, planetary gear, differential gear, steering cylinder, rear axle, drive transmission change-speed and power shift gear)
• 7 – Uppercarriage (uppercarriage and boom bearing arrangement and counterweight, loose parts, maintenance ladder, cab floor and cab lift mechanism, console with heating and air condition, lining for oil cooler and engine radiator, additional filters, engine lining and engine cover, lining behind cab, lining right, rotating joint and slewing drive and slew ring, hydraulic oil tank and refilling filter, diesel tank, refueling pump, hydraulic oil preheating)
• 8 – Cab (cab variations, standard cab with windows, cab 1 through 5, door, sliding window, roof screen, console right, air duct, bullet-proof glass cab and windscreen and roof screen, driver’s seat mounting parts, standard seats 1 through 4, air-conditioned seat and seats 1 through 4, heater and heater hoses, auxiliary heating, air conditioning system 1 and 2, front and upper guards)
• 9 – Central Lubrication System (overview, main distributor, slew ring, cab lift mechanism, boom, dipper stick, pump and piece parts, centralized lubrication accessories)
• 10 – Signs And Warning Labels (universal labels 1, 2 and 3)
• 11 – Working Equipment (quick couplings on stick head, ball shut-off valves on shaft head, protective equipment for hydraulic on dipper stick, boom 6.5 m, hydraulic installation boom 6.5 m, hydraulic cylinders for boom and dipper stick, dipper stick 4.4 m and 5.45 m, hydraulic installation for both dipper sticks, electrical installation working equipment, multipurpose stick 4.0 m, connecting rod and rocker arm, hydraulic installation with multipurpose stick, hydraulic installation pilot control multipurpose stick)
• 12 – Safety Devices / Sicherheitseinrichtungen (high pressure safety filter, pipe rupture valves for boom and dipper stick cylinder, overload warning with and without pipe rupture valves, overload shutdown with pipe break protection, triple control block, electrical installation overload shut-off, tool filter on boom, warning device driving and driving with rotating beacon, limiter loading height, reach limiting, lift cylinder cushioning with and without hose rupture safety valve, rear view camera)

Read as a whole, the Terex Fuchs MHL331 illustrated parts catalog gives a workshop, dealer parts counter, or machine owner a single reference for every replaceable component on the machine. Each chapter works as a self-contained unit: you open the graphical page, locate the callout number on the exploded illustration, then jump to the facing table to read the exact part number, its original Terex description, and the quantity used on the machine. That structure supports anything from ordering a single O-ring to identifying a complete hydraulic cylinder assembly or a cab lift mechanism.

Systems And Assemblies Documented

The catalog spans the entire MHL331 – engine, hydraulic, electrical, drivetrain, undercarriage, superstructure, cab, and attachments. Significant assemblies with their own exploded sections include the Tcd2012 L06 2v diesel engine and its sub-assemblies, main hydraulic pump and piece parts, 4-point outrigger with stabilizer cylinders, travel drive and gear shift, oscillating axle locking, blade hydraulics, front and rear axles with planetary and differential gears, travel motor, drive transmission for both change-speed and power shift variants, uppercarriage counterweight and boom bearing arrangement, cab lift mechanism, rotating joint with 12 and 14 channel piece parts, swing gearbox with slewing motor, hydraulic oil tank, diesel tank, refueling pump, standard and bullet-proof cabs, driver’s seats in both standard and air-conditioned variants, heating and air conditioning, central lubrication system, and the full working equipment range covering 6.5 m boom, 4.4 m, 5.45 m and 4.0 m multipurpose sticks.

How To Use This Catalog For Parts Identification

Every illustration is numbered against a table on the adjacent page. The table columns follow the same multilingual layout throughout: item position, part number (Teilenummer / Numero de pieces / Numero de la pieza), quantity, and the English, German, French and Spanish description. Parts shared across multiple assemblies – flanges, O-rings, hose clips, screws, and mounting hardware – are indexed by position number so you can confirm you are ordering the exact item shown. The alphanumeric parts list at the end of the catalog sorts every part number numerically, letting you work backward from a part number you already have to find the page and callout where it appears.

Who This Parts Catalog Is For

This MHL331 illustrated parts catalog is intended for Terex Fuchs dealers, service technicians, parts managers, and machine owners who need to identify and order the correct replacement component for a specific serial number range. Because the catalog is keyed to serial number 1561 and up, it removes the guesswork that comes from using a parts list for the wrong build year. Hydraulic fittings, seal kits, hose assemblies, cylinders, control blocks, axle internals, cab hardware, and warning labels are all documented against original Terex part numbers.

Get The Terex Fuchs MHL331 Parts Catalog Instantly

IMAGES PREVIEW

With the Terex Fuchs MHL331 illustrated parts catalog in hand you can identify any part on the machine – from a single flange seal to a complete hydraulic cylinder assembly – without waiting on the dealer or guessing at numbers. Correct part identification means fewer wrong orders, less downtime, and repairs that go back together the way Terex designed them. The catalog arrives as an instant PDF download after checkout, requires no shipping, and can be opened on any device, searched on a laptop in the workshop, or printed page by page and taken straight to the machine. Keep it on the shop computer, on a tablet at the parts counter, or in a printed binder – whatever suits how you work.