Tigercat 720B FELLER BUNCHER Operator’s Manual – PDF DOWNLOAD

Description

Tigercat 720B FELLER BUNCHER Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Tigercat 720B FELLER BUNCHER Operator’s Manual – PDF DOWNLOAD

INTRODUCTION :

An Operator’s manual, Service manual and a Parts catalog are made available by Tigercat to assist the dealer, customer and operator in becoming familiar with the features of the 720B Feller Buncher. The operator’s manual will assist the operator with the techniques of proper and safe operation of the 720B Feller Buncher.

• There is also important information regarding the safe operation of the saw head. The service manual contains safety and servicing procedures and a preventive maintenance schedule to ensure optimum machine performance. Section 1 in both the operator’s manual and the service manual contains safety information that must be followed.
• As well, throughout the rest of the manuals, WARNING and CAUTION notices are displayed where necessary, drawing attention to possible hazards when performing certain procedures.
• Only trained personnel should be allowed to operate or work on the machine. The information contained in this manual is current at time of printing. Improvements to the machine are on going and may not be covered, therefore in these cases contact your Tigercat dealer for the appropriate information.

TABLE OF CONTENTS:

Tigercat 720B FELLER BUNCHER Operator’s Manual – PDF DOWNLOAD

720b OPERATOR’S – ISSUE 32 1
INTRODUCTION 3
SAE STANDARDS 4
NON-APPROVED FIELD PRODUCT CHANGES 5
SECTION 1 – SAFETY 7
ARTICULATION LOCK PIN 15
boom lift lock 16
ENGINE ACCESS PANELS 14
FIRE PREVENTION 7
FIRE PREVENTION GUIDELINES 17
WHAT ELSE TO DO BEFORE YOU EXPERIENCE A FIRE 18
WHAT TO DO AFTER A FIRE 19
WHAT TO DO IN CASE OF A MACHINE FIRE 18
INTERLOCK SWITCHES ON DOORS 12
parking the machine 12
SAFETY PRECAUTIONS, GENERAL 8
SAFETY PRECAUTIONS, OPERATING 10
SAFETY PRECAUTIONS, SERVICING 14
SAFETY SYMBOLS 8
APPENDIX – USING HIGH SPEED DISC SAWS SAFELY21
Comments and instructions21
Direction of throw 27
High angle wrist rotation ability 28
Recognizing the Dangers 27
Throwing long wood pieces 30
Dangers 23
forward 22
Be aware of the hazards 22
Other instructions 23
Safe practices 23
Several types of heads involved 22
Stored energy 22
HIGH ANGLE WRIST ROTATION CAPABILITY 29
Saw Head Don’ts 35
Type of Housing makes a Difference 24
SECTION 2 – CONTROLS AND OPERATION37
Accumulating Arms 38
AIR CLEANER, engine air 56
AIR CLEANER UNLOADER VALVE 56
AIR CONDITIONER/HEATER 46
AIR CONDITIONING SYSTEM, SERVICING 47
AIR VENTS 46
ARTICULATION LOCK PIN 68
AUXILIARY POWER OUTLET 52
Battery Disconnect Switch 54
BOOM CYLINDER LOCK 69
Boom Lift 38
Boom Tilt 38
Brakes 39
CARE OF THE MACHINE 65
CENTER JOINT LOCK PIN 68
CIGAR LIGHTER 52
Clamp arms 39
CLEANING A/C CONDENSER, OIL COOLER AND RADIATOR 58
CLEANING LEXAN WINDOWS 66
CONTROLS – CAB 38
Creep switch 50
DIFFERENTIAL LOCK, (FRONT) SWITCH 38
Differential Lock, (front) switch 50
Differential Lock, (rear) switch 50
DOME LIGHT 43
Drive Control 39
EMERGENCY EXIT/SKYLIGHT 43
ENGINE AIR PRECLEANER 56
ENGINE COMPARTMENT 54
Engine Coolant Temp gauge 53
ENGINE, HOT WATER SHUT OFF VALVE 48
Engine Oil Pressure gauge 52
ENGINE, RESTARTING AFTER RUNNING OUT OF FUEL 62
Engine RPM 39
engine, STARTING 62
ENGINE, STARTING IN COLD WEATHER 63
ENGINE, STOPPING 65
FILTER – CAB FRESH AIR 48
FILTER, RECIRCULATING AIR – A/C UNIT 46
FOOT CONTROL, center 39
FOOT CONTROL left 39
FOOT CONTROL, right 39
FUEL TANK 54
Gear Shift LEVER 40
Horn switch 51
HOT WATER SHUT OFF VALVE (ENGINE) 48
HourMETER 52
HYDRAULIC HAND FILL PUMP 55
HYDRAULIC OIL LEVEL, LOW 52
HYDRAULIC OIL RESERVOIR 55
Hydraulic Oil Temperature gauge 52
Ignition switch 49
INSTRUMENT PANEL 49
JOYSTICK, LEFT 38
JOYSTICK, right 38
LIGHT – DOME 43
LIGHTS SWITCH, FRONT 51
LIGHTS SWITCH, REAR 51
LOW HYDRAULIC OIL LEVEL 52
MACHINE PREPARATION 64
System Test and Warm-Up 64
OPERATING MACHINE 59
Pre-Start Checks 59
parking brake 40
PILOT RESET switch 49
PILOT SYSTEM SHUT OFF 49
PRECLEANER, ENGINE AIR 56
Pressurized Water System 42
RADIO, AM/FM STEREO CASSETTE 43
Saw Circuit Pressure Gauge 53
SAW switch 50
SEAT 44
SKYLIGHT/EMERGENCY EXIT 43
starting engine 62
Steering 38
STEREO CASSETTE/RADIO 43
STOPPING ENGINE 65
TACHOMETER 53
THROTTLE CONTROL 39
TOWING INSTRUCTIONS 67
TRANSMISSION 41
CHECK OIL LEVEL 41
Voltmeter 53
Water System, PRESSURIZED 42
SECTION 3 – LUBRICATION & MAINTENANCE71
FILTERS71
CHARGE PUMP PRESSURE FILTER 81
FUEL FILTER/WATER SEPARATOR 80
FUEL TANK STRAINER 80
HYDRAULIC OIL RETURN FILTERS 81
HYDRAULIC OILS 77
NEW MACHINE MAINTENANCE71
FIRST 50-100 HOUR INSPECTION AND SERVICE REPORT 72
INITIAL PRE-DELIVERY INSPECTION 72
TIGHTENING POINTS 72
PRESSURE SETTINGS WITH71
18″ SAW, KOEHRING WATEROUS 89
20″ SAW, KOEHRING WATEROUS 90
BUNCHING SHEAR, TIGERCAT 86
DW5000 (19″) Tigercat BUNCHING SAW 87
DW5600 (22″) Tigercat BUNCHING SAW 88
SCHEDULED MAINTENANCE71
1000 HOURS 76
125 HOURS 75
2000 HOURS 76
250 HOURS 75
500 HOURS 75
8 HOURS 74
FREQUENTLY 74
SEASONAL 77
STARTUP PROCEDURE AFTER MAINTENANCE 82
TORQUE CHART 84
TORQUE CHART, GENERAL 85
WHEELS, INSTALLING 72

IMAGES PREVIEW OF THE MANUAL:

TIGERCAT 720B FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD:\

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V