Tigercat M724D MULCHER OPERATOR’S MANUAL – PDF DOWNLOAD

Description

Tigercat M724D MULCHER OPERATOR’S MANUAL – PDF DOWNLOAD

DESCRIPTION:

Tigercat M724D MULCHER OPERATOR’S MANUAL – PDF DOWNLOAD

INTRODUCTION :

• An Operator’s manual, Service manual and a Parts catalog are made available by Tigercat to assist the
  dealer, customer and operator in becoming familiar with the features of the M724D Mulcher.
• The operator’s manual will assist the operator with the techniques of proper and safe operation of the
  M724D Mulcher. In addition, the operator’s manual contains important information regarding the safe
  operation of both a mulching head and a saw head, as the M724D Mulcher can be used in a Feller
  Buncher configuration. The service manual contains safety and servicing procedures and a preventive
  maintenance schedule to ensure optimum machine performance.
• Section 1 in both the operator’s manual and the service manual contains safety information that must be
  followed. As well, throughout the rest of the manuals, WARNING and CAUTION notices are displayed
  where necessary, drawing attention to possible hazards when performing certain procedures.
• Only trained personnel should be allowed to operate or work on the machine.
• The phrase “and up” appearing in this manual after the serial number implies that the related
  information is current for any machine serial number HIGHER than the serial number preceding the “and
  up”.
• Tigercat reserves the right to make changes to the machine after this manual release date that may not
  immediately appear in this manual.
• Every effort is made to send out updates on a regular basis. If the machine in question was built after
  the release date of this manual and there is a discrepancy, call Tigercat service department. The release
  date appears on the first page.

TABLE OF CONTENTS:

Tigercat M724D MULCHER OPERATOR’S MANUAL – PDF DOWNLOAD

M724D OPERATOR’S ISSUE 1.1……………………………. 1
INTRODUCTION…………………………………….. 3
S.A.E. STANDARDS…………………………………. 4
NON-APPROVED FIELD PRODUCT CHANGES…………………. 5
SECTION 1 – SAFETY…………………………………… 7
ARTICULATION LOCK BAR ……………………………. 19
battery disconnect switch ………………………… 14
BOOM LIFT LOCK ………………………………….. 19
ENGINE ACCESS PANELS …………………………….. 20
exhaust fumes …………………………………… 20
FELLER BUNCHER OPERATION SAFETY …………………… 17
FIRE PREVENTION …………………………………. 21
FIRE PREVENTION GUIDELINES ……………………. 21
WHAT ELSE TO DO BEFORE YOU EXPERIENCE A FIRE ……. 22
WHAT TO DO AFTER A FIRE ………………………. 23
WHAT TO DO IN CASE OF A MACHINE FIRE …………… 22
first aid ………………………………………. 10
Fluid leaks …………………………………….. 18
HAZARD ZONE …………………………………….. 9
HYDRAULIC PRESSURE HAZARD ………………………… 18
LOOSE CLOTHING HAZARD ……………………………. 19
MULCHING OPERATION SAFETY ………………………… 15
PARKING THE MACHINE ……………………………… 14
protective clothing ……………………………… 9
SAFETY INTERLOCK SWITCHES ON CAB DOORS …………….. 14
SAFETY PRECAUTIONS, GENERAL ………………………. 9
SAFETY PRECAUTIONS, OPERATING …………………….. 12
SAFETY PRECAUTIONS, SERVICING …………………….. 18
SAFETY SYMBOLS ………………………………….. 8
Signal Words ……………………………………. 8
USING HIGH SPEED DISC SAWS SAFELY……………………… 25
Comments and instructions…………………………. 25
Direction of throw …………………………… 31
High angle wrist rotation ability ……………… 32
Recognizing the Dangers ………………………. 31
Throwing long wood pieces …………………….. 34
Dangers ………………………………………… 27
forward ………………………………………… 26
Be aware of the hazards ………………………. 26
Other instructions …………………………… 27
Safe practices ………………………………. 27
Several types of heads involved ……………….. 26
Stored energy ……………………………….. 26
HIGH ANGLE WRIST ROTATION CAPABILITY ………………. 33
Saw Head Don’ts …………………………………. 39
Type of Housing makes a Difference ………………… 28
SECTION 2 – CONTROLS AND OPERATION…………………….. 41
ACCUMULATING ARMS ……………………………….. 43
AIR CLEANER, ENGINE AIR ………………………….. 63
AIR CLEANER UNLOADER VALVE ……………………….. 63
AIR CONDITIONER/HEATER …………………………… 50
air supply connector …………………………….. 47
AIR VENTS ………………………………………. 50
ARTICULATION LOCK BAR ……………………………. 79
Attachment tilt …………………………………. 42
AUXILIARY POWER OUTLET …………………………… 58
AUXILIARY SWITCH LOCATION ………………………… 57
BATTERY DISCONNECT SWITCH ………………………… 60
BOOM CYLINDER LOCK ………………………………. 80
BOOM FLOAT(OPTIONAL) …………………………….. 57
Boom Lift ………………………………………. 42
BRAKES …………………………………………. 43
BULB TEST/ENGINE SHUTDOWN OVERRIDE – SWITCH ……… 56
CARE OF THE MACHINE ……………………………… 73
CENTER JOINT LOCK PIN ……………………………. 79
CLAMP ARMS ……………………………………… 43
CLEANING A/C CONDENSER, OIL COOLER AND RADIATOR …… 64
CLEANING LEXAN WINDOWS …………………………… 75
CONTROLS – CAB ………………………………….. 42
DIFFERENTIAL LOCK, (FRONT) SWITCH …………………. 42
DIFFERENTIAL LOCK, (REAR) SWITCH ………………….. 55
DRIVE CONTROL …………………………………… 43
DRIVE LIMITER …………………………………… 55
EMERGENCY EXIT/SKYLIGHT ………………………….. 47
ENGINE ACCESS PANELS …………………………….. 60
ENGINE AIR PRECLEANER ……………………………. 62
ENGINE COMPARTMENT ………………………………. 60
ENGINE, HOT WATER SHUT OFF VALVE ………………….. 51
ENGINE, RESTARTING AFTER RUNNING OUT OF FUEL ……… 70
ENGINE RPM ……………………………………… 44
ENGINE, STARTING ………………………………… 70
ENGINE, STARTING IN COLD WEATHER ………………….. 71
ENGINE, STOPPING ………………………………… 73
ETHER STARTING AID (OPTIONAL) ……………………. 71
FAN SWITCH ……………………………………… 56
FILTER – CAB FRESH AIR …………………………… 51
FILTER, RECIRCULATING AIR – A/C UNIT ………………. 50
FOOT CONTROL, CENTER …………………………….. 43
FOOT CONTROL, LEFT ………………………………. 43
FOOT CONTROL, RIGHT ……………………………… 43
FUEL TANK ………………………………………. 61
FUSE PANEL ……………………………………… 58
GAUGES………………………………………….. 41
ENGINE COOLANT TEMPERATURE ……………………. 53
ENGINE OIL PRESSURE ………………………….. 53
HYDRAULIC OIL TEMPERATURE …………………….. 53
TACHOMETER ………………………………….. 54
VOLTMETER …………………………………… 54
GEAR SHIFT LEVER ………………………………… 45
HORN SWITCH …………………………………….. 55
HOT WATER SHUT OFF VALVE (ENGINE) …………………. 51
HOURMETER ………………………………………. 58
HYDRAULIC HAND FILL PUMP …………………………. 62
HYDRAULIC OIL RESERVOIR ………………………….. 61
INSTRUMENT PANEL ………………………………… 52
JOYSTICK, LEFT ………………………………….. 42
JOYSTICK, RIGHT …………………………………. 42
KEY SWITCH ……………………………………… 57
LIGHT – DOME ……………………………………. 47
LIGHTER ………………………………………… 57
LIGHTS SWITCH, WORKING, REAR …………………….. 52
LIGHTS SWITCH, WORKING, FRONT …………………….. 52
MACHINE PREPARATION ……………………………… 72
SYSTEM TEST AND WARM-UP ………………………. 72
MULCH DEFLECTOR DOOR …………………………….. 43
OPERATING MACHINE ……………………………….. 66
PRE-START CHECKS …………………………….. 66
PARKING BRAKE …………………………………… 46
PILOT RESET SWITCH ………………………………. 55
PILOT SYSTEM SHUT OFF ……………………………. 55
PRECLEANER, ENGINE AIR …………………………… 62
PRESSURIZED WATER SYSTEM …………………………. 46
RADIO, AM/FM STEREO CASSETTE ……………………… 47
SAW/CUTTER CIRCUIT PRESSURE – GAUGE ……………….. 59
SAW/CUTTER SWITCH ……………………………….. 54
SEAT …………………………………………… 48
SKYLIGHT/EMERGENCY EXIT ………………………….. 47
SPEED CONTROL LEVER ……………………………… 44
STARTING ENGINE …………………………………. 70
STEERING ……………………………………….. 42
STEREO CASSETTE/RADIO ……………………………. 47
STOPPING ENGINE …………………………………. 73
THROTTLE CONTROL ………………………………… 44
TOWING INSTRUCTIONS ……………………………… 76
TRANSPORTING INSTRUCTIONS ………………………… 78
WARNING LIGHTS…………………………………… 41
COOLANT LEVEL ……………………………….. 52
COOLANT TEMPERATURE ………………………….. 52
ENGINE OIL PRESSURE ………………………….. 52
HYDRAULIC OIL TEMPERATURE …………………….. 53
LOW HYDRAULIC OIL LEVEL ………………………. 53
WATER SYSTEM, PRESSURIZED ……………………….. 46
windshield debris blaster ………………………… 47
SECTION 3 – LUBRICATION & MAINTENANCE………………….. 81
AIR CLEANER MAINTENANCE ………………………….. 94
AIR CONDITIONING SYSTEM, CHECKING …………………. 98
BELT, ENGINE SERPENTINE, REPLACING …………………105
boom lift lock …………………………………..112
CENTER JOINT……………………………………..100
LUBRICATION ………………………………….100
MAINTENANCE ………………………………….100
Converting………………………………………. 81
feller buncher configuration to mulcher …………114
PRESSURE SETTINGS ATTACHMENT PUMP MULCHER ……115
PRESSURE SETTINGS MULCH DEFLECTOR DOOR ………118
reset attachment pump MAXIMUM displacement …..114
mulcher to feller buncher configuration ………..108
PRESSURE SETTINGS attachment pump saw ……….109
Pressure settings saw clamp and accumulator ….112
reset attachment pump MAXIMUM displacement …..108
DRIVE SHAFT SPLINE LUBRICATION, MIDDLE AND REAR ……..106
EMERGENCY EXITS, CHECK MONTHLY ……………………. 83
ENGINE SERPENTINE BELT, REPLACING ………………….105
FILTERS…………………………………………. 81
ENGINE AIR CLEANER …………………………… 94
FUEL FILTER/WATER SEPARATOR …………………… 90
FUEL TANK STRAINER …………………………… 91
HYDRAULIC OIL RETURN FILTERS ………………….. 92
HYDROSTATIC CHARGE PUMP PRESSURE FILTERS ………. 92
SERVICING GUIDELINES FOR OIL FILTERS …………… 93
FIRE PREVENTION …………………………………. 83
HYDRAULIC OILS ………………………………….. 87
NEW MACHINE MAINTENANCE…………………………… 81
FIRST 50-100 HOUR INSPECTION AND SERVICE REPORT …. 82
INITIAL PRE-DELIVERY INSPECTION ……………….. 82
TIGHTENING POINTS ……………………………. 82
OIL LOST FROM LEAKAGE ……………………………. 82
PRESSURIZED WATER SYSTEM MAINTENANCE ………………. 96
RELIEF VALVE ADJUSTING PROCEDURE …………………..120
REPLACING THE ENGINE SERPENTINE BELT ……………….105
SCHEDULED MAINTENANCE…………………………….. 81
GENERAL …………………………………….. 83
8 HOURS …………………………………….. 84
125 HOURS …………………………………… 85
250 HOURS …………………………………… 85
500 HOURS …………………………………… 86
1000 HOURS ………………………………….. 86
2000 HOURS ………………………………….. 86
SEASONAL ……………………………………. 87
SERVICE AND LUBRICATION CHART …………………….. 89
SPEED CONTROL LEVER ADJUSTMENT …………………….101
STARTUP PROCEDURE AFTER MAINTENANCE ………………..102
TORQUE CHART …………………………………….121
TORQUE CHART, GENERAL …………………………….122
TRANSMISSION …………………………………….100
CHECK OIL LEVEL ………………………………100
WHEELS, INSTALLING ………………………………. 82

IMAGES PREVIEW OF THE MANUAL:

TIGERCAT M724D MULCHER OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V