TM 9-2320-209-34P 2 1/2 Ton 6×6 Truck M34 M35 Series Repair Parts and Special Tools List Manual – 1976 Change 2

Description

TM 9-2320-209-34P 2 1/2 Ton 6×6 Truck Repair Parts and Special Tools List Manual

This is the complete TM 9-2320-209-34P Direct and General Support Maintenance Repair Parts and Special Tools List covering the entire 2 1/2 ton, 6×6 truck family. Published by Headquarters, Department of the Army, with a joint Department of the Air Force Technical Order number TO 36A12-1-494, this manual is dated 1 December 1976 and incorporates Change 2, current as of March 1980. It is the authoritative reference for identifying, requisitioning, and replacing repair parts and special tools at the direct support, general support, and depot maintenance levels.

File Details

• Manual Type: Direct and General Support Maintenance Repair Parts and Special Tools List (RPSTL)
• Document Number: TM 9-2320-209-34P / TO 36A12-1-494
• Date: 1 December 1976 (Change 2, current as of March 1980)
• Language: English
• Page Count: Approximately 1,000 pages
• File Format: PDF
• Coverage: 2 1/2 Ton, 6×6, M44A1 and M44A2 Series Trucks (multifuel and gasoline variants)

Chapters Covered

• Group 01 — Engine Assembly
• Group 02 — Clutch Release Mechanism
• Group 03 — Fuel System: Air Cleaner, Tanks, Lines, Fittings, Headers, Fuel Filters, Accelerator, Throttle and Choke Controls
• Group 04 — Exhaust System: Muffler and Pipes
• Group 05 — Cooling System: Radiator, Shrouds
• Group 06 — Electrical System: Generator, Alternator, Regulator, Starting Motor, Instrument and Engine Control Panel, Lights, Horn, Batteries, Wiring Harness
• Group 07 — Transmission Assembly
• Group 08 — Transfer and Final Drive Assemblies: Power Transfer, Gear Shift and Vacuum Booster Controls
• Group 09 — Propeller Shafts
• Group 10 — Front Axle: Axle Assembly, Differential, Steering Mechanism
• Group 11 — Rear Axle: Axle Assembly, Differential
• Group 12 — Brakes: Hand Brakes, Service Brakes, Hydraulic Brake System, Air Brake System, Air Compressor, Trailer Brake Connections
• Group 13 — Wheels and Tires
• Group 14 — Steering: Mechanical Steering Gear Assembly
• Group 15 — Frame and Towing Attachments: Frame Assembly, Pintle and Towing Attachments, Spare Wheel Carrier, Fifth Wheel
• Group 16 — Springs and Shock Absorbers
• Group 18 — Body, Cab, Hood and Hull Assemblies
• Group 20 — Hoist, Winch, Capstan, Windlass, Power Control Unit and Power Takeoff
• Group 21 — Bumpers and Guards
• Group 22 — Body, Chassis and Accessory Items
• Group 26 — Special Tools and Test Equipment
• Group 33 — Special Purpose Kits
• Group 47 — Gages (Non-Electrical)
• Group 95 — General Use Standardized Parts and Bulk Material
• Section IV — National Stock Number and Part Number Index

IMAGES PREVIEW

This TM 9-2320-209-34P repair parts and special tools list is the definitive parts identification manual for the 2 1/2 ton 6×6 truck family. It provides direct support, general support, and depot-level maintenance activities with the complete parts breakdown for every major system on the vehicle. Each functional group is presented with exploded-view illustrations keyed to item numbers, and the accompanying tabular listings provide the National Stock Number (NSN), part number, FSCM, description, unit of measure, and quantity for every component. The manual covers engine assemblies for gasoline (OA-331), multifuel (LDS-427-2), and multifuel (LD-465-1, LD-465-1C, LDT-465-1C) configurations, ensuring the correct parts are identified regardless of which powerplant is installed.

What This Manual Covers

The TM 9-2320-209-34P covers a vast range of vehicles built on the M44A1 and M44A2 chassis. Cargo truck models include the M34, M35, M35A1, M35A2, M35A2C, M36, M36A2, and M36C. Dump truck variants include the M47, M59, and M342A2. Tractor models include the M48, M275, M275A1, and M275A2. Van configurations include the expansible van M292, M292A1, M292A2, M292A5 and the shop van M109, M109A1, M109A2, M109A3. Tank trucks include the fuel servicing M49, M49A1C, M49A2C, M49C and water tank M50, M50A1, M50A2, M50A3. Specialized bodies include the instrument repair shop M185 series, earth boring machine and pole setter M764 and V18A/MTQ, telephone construction and maintenance V17A/MTQ, pipeline construction M756 and M756A2, wrecker crane M108, and wrecker light M60.

Because this is a repair parts and special tools list rather than a full overhaul procedure manual, it is the correct reference when a part must be identified, cross-referenced, or ordered. Every figure in the manual corresponds to a functional group and shows the assembly in exploded form with callouts. The tabular listing that follows each figure provides the exact NSN and part number required for requisitioning. The manual also includes the complete National Stock Number and Part Number Index, so a part can be located even if only the NSN or only the manufacturer part number is known.

Special Tools and Test Equipment

Group 26 of this TM 9-2320-209-34P lists the special tools, test equipment, and support equipment authorized for direct support, general support, and depot maintenance of the 2 1/2 ton truck. This includes seal replacers, bearing removers and replacers, spanner wrenches, pullers, gear replacers, bushing burnishers, and pressure gages. Tool kits are itemized by echelon, covering organizational maintenance sets A and B, field maintenance 3rd echelon, general maintenance 4th echelon, and depot 5th echelon. Each tool is listed with its NSN, part number, description, and basis of issue, so a tool room can verify its authorized equipment against the manual.

Who This Manual Is For

This 2 1/2 ton 6×6 truck repair parts and special tools manual is intended for direct support and general support maintenance units, depot maintenance activities, parts specialists, supply personnel, and vehicle restorers who need the correct part numbers and NSNs for the M34, M35, M35A1, M35A2, M35A2C, M36, M36A2, M36C, M47, M59, M342A2, M48, M275 series, M49 series, M50 series, M108, M109 series, M185 series, M292 series, M60, M756 series, M764, and associated variants. It is also a valuable reference for collectors and owners of these vehicles who want to understand the parts breakdown of every major assembly.

Why This Manual Matters

Ordering the wrong part for a 2 1/2 ton truck is costly and time-consuming. The TM 9-2320-209-34P eliminates guesswork by tying every part to a specific figure and item number, with the exact NSN and part number needed for requisitioning. The exploded-view illustrations show how components fit together, making it easier to identify a part even when only a fragment of the old component is available. The manual also includes the SMR (Source, Maintenance, and Recoverability) codes, which tell maintenance planners and supply personnel the correct maintenance level for removal, replacement, and repair, and the disposition action for unserviceable items.

How to Use This Manual

The manual is organized into four sections. Section I provides the introduction and explains the columns and codes. Section II is the repair parts list, organized by functional group and figure. Section III is the special tools list. Section IV is the National Stock Number and Part Number Index. To locate a part when the NSN or part number is known, use the index in Section IV to find the figure and item number, then look up that figure and item in Section II. To locate a part when only the vehicle system is known, use the table of contents to find the functional group, then find the illustration covering that group, identify the item, and note the figure and item number for the parts list lookup.

Get the Correct Parts and Tools Reference for Your 2 1/2 Ton 6×6 Truck

This TM 9-2320-209-34P repair parts and special tools list gives you the complete parts identification and special tools reference for the entire 2 1/2 ton 6×6 truck family. Whether you are maintaining an M35A2 cargo truck, restoring an M109 shop van, repairing an M49 fuel tanker, or supporting an M764 earth boring machine, this manual provides the NSNs, part numbers, exploded-view illustrations, and special tools lists you need. Correct part identification and the right special tools are essential for safe, efficient maintenance and for keeping these vehicles mission-ready. The PDF is delivered instantly after payment, with no shipping delays, and can be viewed on any device or printed for use in the shop.