Valmet 905 915 Tractor Spare Parts Catalogue PDF – Chassis 500000 Onwards

Description

Valmet 905 and 915 Tractor Spare Parts Catalogue

This is the full spare parts catalogue for the Valmet 905 and 915 tractors, issued under document date 91-05-01 and covering machines from chassis number 500000 onward. It is the same catalogue used by parts counters and workshops to identify a component, find its order number and confirm exactly which tractor variant it fits. Every part is presented as a numbered position on an exploded illustration paired with a tabulated listing, so a fitter can move from a drawing on the left page to the order number on the right page without guesswork. The catalogue also applies to the earlier VOLVO BM VALMET badged machines of the same series.

File Details

• Manual type: Spare parts catalogue
• Brand: Valmet
• Models covered: Valmet 905, Valmet 915 (also listed as VOLVO BM VALMET and VALMET 905, 915)
• Chassis range: from chassis number 500000 onwards; additional listings carry the 900 000 and 600 000 series breaks
• Document date: 91-05-01
• Languages: Finnish, Swedish, English, French
• Page count: 504
• File format: PDF

Chapters Covered

• 10 General information – production numbers, introduction, modifications, numerical index, stickers and sign plates, stickers and paints
• 20 Motor / Engine – cylinder block, flywheel and housing, cylinder head, valve mechanism, crankshaft, gear housing, oil filter, oil sump, air cleaner, intake and exhaust pipes, muffler, cold-starting device and engine heater
• 22 Fuel system – feed pump, fuel filter, fuel pipes, injection pump, atomizers, speed levers
• 23 Cooling system – radiator, coolant pump
• 28 Gasket sets
• 29 Optional equipment – cyclone pre-cleaner
• 30 Electrical system
• 31 Electrical equipment for the engine – starter motor, alternator, battery and bracket
• 32 Electrical system for the cab – dashboard, instrument panel, lights, windscreen wiper and washer
• 33 Other electrical equipment – shift-on-the-go electrics, number plate light, connectors and cable terminals, PTO release switch, EH power lift control parts, slip control, VALMET agrodata
• 39 Optional equipment – rotating warning light, radio, blinker light, rear window wiper and washer, cabin heater, control system for working machines, main switch
• 40 Power transmission
• 41 Clutch
• 42 Gear box – gearbox housing and shift levers, gear lever system, mainshaft, intermediate and P.T.O. shaft, transmission shaft, bevel pinion shaft, differential, gearbox hydraulics, lubricating system
• 43 Hydraulic transmission – oil cooler and pipe system, torque converter and clutch shaft, power shift, lever system and dump valve
• 44 Auxiliary gears – shift-on-the-go, gears for shift-on-the-go, oil cooler and pipe system, creep speed gear
• 45 Final drives
• 46 Power take-off – rear housing and P.T.O. gear levers, power-take-off unit, P.T.O. clutch and intermediate shaft
• 50 Brake system
• 60 Steering system
• 70 Frame and wheels
• 80 Cab and shields
• 90 Working hydraulics
• 100 Tools

IMAGES PREVIEW

How the Parts Lists Are Organised

The catalogue is divided into groups running from 10 through to 100. Each group opens with its own contents page, and optional equipment sits at the end of the group it belongs to rather than in a separate section. Every listing page repeats the same column layout: position number, quantity, order number, part designation in Finnish, Swedish and English, and a notes column.

The position number in the first column matches the number called out on the illustration opposite, so a component on a drawing resolves directly to its order number. Where a part is only a component of a larger assembly, a dot precedes its designation; parts belonging to that sub-assembly carry two dots. The quantity column tells you how many are needed for the assembly shown, which is what you need when ordering fasteners, seals and washers in bulk rather than one at a time.

The notes column is where the catalogue earns its keep. It carries the serial number break points that decide whether a part fits a given machine. Entries written as -XXXXX apply up to a given tractor number; entries written as XXXXX- apply from that number onward. Engine, front axle and cab numbers follow the same convention with an (M), (E) or (O) suffix. Country and market codes are also flagged here – SF for Finland, S for Sweden, N for Norway, DK for Denmark, NL for Holland and F for France – along with L for low range, H for high range and R for reverse, 2WD for the two-wheel-drive model and 4WD for the four-wheel-drive model. Left and right are given from the driver’s seat, marked Vas. and Oik. respectively.

Seal and repair sets are marked with the prefixes S, S1, S2 and K, K1, K2. Any item carrying one of these marks belongs to a set whose own order number is printed at the foot of the page or at the end of the sub-group, so you can order the individual seal or the complete kit. Items flagged Ei var. are not held in stock and must be ordered as a replacement part.

Locating a Part When You Only Have the Number

A numerical index is included for the case where a part number is known but its position in the catalogue is not. The index groups identical parts together and points each one to the page where it appears. The catalogue was originally published for microfilm use and the introductory pages retain the coordinate system for that format, showing how each group starts from the left-hand margin and how the numerical register sits at the beginning of the film – useful context if you are working from a printed or scanned copy and want to understand the original page referencing.

What This Catalogue Lets You Do

With the Valmet 905 915 spare parts catalogue open you can identify a component from an exploded drawing, confirm the correct order number for your exact chassis number, check how many of a given fastener or seal the assembly takes, and establish whether a part changed at a particular serial number before you buy it. That last point is what separates a correct order from a returned one on a tractor series that ran through several build changes.

Because the catalogue covers the engine, fuel and cooling systems, the complete transmission chain from clutch through gearbox, hydraulic transmission, auxiliary gears and final drives, the power take-off, brakes, steering, frame, cab and working hydraulics, it reaches far beyond a simple illustrated parts list. A workshop rebuilding a 905 or 915 gearbox, chasing an oil leak in the hydraulic transmission, or replacing cab electrical components can pull the relevant group, read the position numbers off the drawing and order against the notes column in one pass.

Delivery is instant. The Valmet 905 915 parts catalogue is supplied as a PDF download the moment payment clears – no shipping, no waiting on a parts counter, no postage. It opens on any phone, tablet or computer and every illustration page can be printed and taken to the bench, which is exactly how a parts catalogue is meant to be used.