Bell 315SG Backhoe Loader Parts Manual 2009 – Illustrated PDF Catalogue 874800

Description

Bell 315SG Backhoe Loader Parts Manual – Document 874800 Rev B

This is the illustrated parts catalogue issued by Bell Equipment for the 315SG backhoe loader, published under document number 874800 at Revision B, March 2009 (previous issue September 2007, SIB reference 2009/5004). It is the reference buyers and workshop stores use to identify, order and cross-check individual components on the machine, from a wheel valve stem through to a complete backhoe boom. Every group is presented as a numbered exploded illustration paired with a parts list giving item number, Bell part number, quantity, description and any serial-number or substitution remark.

File Details

• Manual type: Illustrated Parts Manual (parts catalogue / breakdown)
• Brand: Bell Equipment (BELL)
• Model: 315SG Backhoe Loader (TLB)
• Document part number: 874800
• Revision: Rev B (supersedes September 2007 issue)
• Issue date: March 2009
• SIB reference: 2009/5004
• Language: English
• Page count: 674 pages
• File format: PDF

Chapters Covered

• General Information (manual use, ordering code, PIN structure, abbreviations, machine dimensions)
• Group 0100 – Wheels
• Group 0200 – Axles, Diffs and Suspension: differential assembly with lock, differential lock plumbing, front axle housings and tie rods, front axle hubs and universal joints, planetary drive, limited slip differential, spiral bevel input pinion and ring gear, spiral bevel gear and input flange
• Group 0300 – Transmission: shift forks and shift rails (Synchro-Shuttle), shifter lever and housing, transmission control lever, rear driveshaft and universal joints, transmission housing (Synchro-Shuttle and Power Shift), transmission dipstick and tube, torque converter, forward and reverse clutch assemblies, input shafts, MFWD idler and output shafts, output and intermediate shaft groups, Power Shift input shaft and second/third/fourth gear clutch assemblies, transmission control valve group (Synchro-Shuttle and Power Shift), transmission intermediate plate and gasket, transmission charge pump, range shift valve group
• Group 0400 – Engine: crankshaft and main bearings (turbo), camshaft, rocker arm / shaft / push rod, rocker arm cover and gasket, timing gear cover and gasket, piston / connecting rod / cylinder liner, front plate, cylinder block and main bearing cap, engine short block, oil filler neck, engine oil dipstick, engine oil pan and gasket, engine oil filter and housing, air intake system (turbo), engine balancer shaft (turbo), turbocharger and turbocharger oil lines, water pump inlet and pulley, water pump and repair kit, thermostat and cover, engine oil cooler and adapter, fuel filter 2000 and fuel filter (turbo), fuel filter lines, fuel transfer pump, starting motor (Iskra and Denso) and adaptor kit, alternator mounting brackets, fan drive and belt (turbo), flywheel, flywheel housing, engine overhaul kit, engine major overhaul gasket kit, engine gasket kit
• Group 0500 – Engine Auxiliary System: engine coolant heater, cold weather starting aid, radiator, hoses, fan shroud and guard, engine speed control linkage, air cleaner and mounting brackets, pre-cleaner, exhaust extension and muffler (w/ turbo), engine mounts and isolators, fuel tank and fuel tank hoses, replacement fuel tank and fuel tank hoses
• Group 0900 – Steering System: steering wheel and column, steering wheel and tilt column, power steering valve seal repair kit, steering hydraulics (with and without MFWD), steering cylinder (MFWD)
• Group 1000 – Service Brakes: service brake assembly, brake valve and pedals, brake valve assembly, service brake hydraulics, brake valve boost plumbing (ROPS and cab), parking brake
• Group 1300 – Miscellaneous Vehicle: loader arm service lock, license plate lamp and rear lights, trademarks and labels (4×2 and 4×4), Loctite service kit, environmental drain package, O-ring kit
• Group 1600 – Vehicle Electrical Systems: single and dual battery installation, master battery disconnect, remote start post, alternator, rotating beacon, standard/deluxe lights and roof harness (to and from VIN 234/235), roof with Bell lighting option, headlights and mirror, side console wiring harnesses, front console wiring harnesses, hydraulic front coupler harness, monitor panel with monitor, switches and labels, differential lock switch, return-to-dig switch, engine wiring harness, engine front harness, select flow control and pump control wire harness, wire lead kit, Weatherpack terminals and connectors, supplemental terminals/connectors and repair conduit, Deutsch terminals
• Group 1700 – Frame, Chassis or Supporting Structure: main frame with stabilizer, bottom guard, bumper, front counterweight
• Group 1800 – Operator’s Station: ROPS canopy headliner and mounting isolators, headliner and cab mounting isolators (cab frame), roof (cab, quarter cab or ROPS), floor mats, doors and side windows for cab, windshield glass for cab, sliding rear windows and corner window panes, front windshield wiper system, front windshield washer reservoir and pump, rear windshield wiper system, backhoe control console (two lever), steering column covers, front console (cab or canopy), side instrument panel housing and stabilizer control cover (canopy and cab), seat / seat belts / armrest, seat slide and adjuster control levers, seat swivel and swivel latch, seat suspension and shock absorber, seat base and tether belt, seat base and height adjuster, air suspension seat base, suspension seat, cab heater and air conditioning ducting, heater and air conditioning with pressurizer, canopy heater/hoses and control, cab heater (20,000 BTU), air conditioning hardware and hoses, heat and noise barrier
• Group 1900 – Sheet Metal and Styling: bonnet and miscellaneous parts, battery enclosure and toolbox, loader plumbing shield, grille and grille housing, extended grille housing, operator station fenders and skirts
• Group 2000 – Safety, Convenience and Miscellaneous: external mirror, interior rear view mirror, back-up alarm system, horn, sun visor
• Group 2100 – Vehicle Main Hydraulic System: main hydraulic pump, main hydraulic system (two sheets), main hydraulic system reservoir, hydraulic oil filter, hydraulic oil cooler and hoses, hydraulic oil cooler and hoses (hi-ambient), ride control kit
• Group 3100 – Loader: multi-purpose bucket cylinder and repair kit, multi-purpose bucket, multi-purpose bucket with cylinder and hydraulic oil lines, loader bucket and cutting edge, loader bucket pins, quick coupler forks and frame, hydraulic front coupler, front coupler cylinder, bucket leveling and return-to-dig linkage, loader control valve linkage, third function loader control valve linkage, loader lift arm, loader bucket linkage (to and from VIN 356/357), loader/stabilizer control valve, boom section, bucket section, auxiliary section, stabilizer/loader valve (Husco), hydraulic front coupler valve, loader boom lift cylinder hydraulics, loader bucket cylinder and third function hydraulics, hydraulic front coupler, boom cylinder and repair kits, loader bucket cylinder and repair kits
• Group 3300 – Backhoe: backhoe buckets, ditch cleaning bucket, bucket pins and bushes, trenching buckets, backhoe valve mounting plate, stabilizer valve linkage, two-lever control lever valve conversion kit, fifth function pedal, backhoe boom lock control lever and linkage, sliding frame, swing frame and pins, backhoe boom, backhoe boom protection plate, backhoe bucket links, standard dipperstick, extendible dipperstick and locking pin, protection and grip kit, backhoe control valve (Husco), priority inlet section, boom section, bucket section, crowd section, swing section, extendible section, selective flow section, auxiliary section, fifth function manual valve kit, hydraulic remote kit, locking control valve, stabilizer cylinder hydraulics, boom cylinder hydraulic hoses and fittings, bucket cylinder hydraulic hoses/lines and fittings (standard and extendible dipperstick), crowd cylinder hydraulic hoses and fittings, swing cylinder hydraulic hoses and fittings, extension cylinder hydraulic hoses and fittings, auxiliary equipment hydraulic hoses and fittings, side shift lock hydraulics, backhoe boom lock valve hydraulics, backhoe cylinder hydraulics, boom cylinder, bucket cylinder and repair kits (heavy duty and standard), crowd cylinder and repair kit, stabilizer cylinder and repair kit, swing cylinder and repair kit, extendible dipperstick cylinder

The manual is built on Bell’s own functional-group coding: each illustration carries a heading such as “GROUP 0400 – ENGINE”, a functional group number and any serial breaks that apply, so a single breakdown may apply only above or below a given machine serial. The numbered call-outs on each drawing line up with the item column of the parts list on the facing page, and the remarks column calls out substitutions, items no longer available, replacement part numbers, serial-range applicability and “also order” notes. At the back of the manual there is a record table for Technical Documentation Bulletins, a dealer information panel, an ordering-code explanation with a PIN breakdown example, and a machine-dimensions chapter listing ground clearance, overall length, stabiliser spread, axle-to-axle length, loading height, reach from swing pivot and rear axle, maximum digging depth, digging depths (SAE) at 610 mm and 2440 mm flat bottom, overall width, side-shift from tractor centreline, bucket rotation, transport height, loader bucket dump angle and rollback, maximum height to loader bucket hinge pin, dump clearance, reach at full height, dig below ground and front axle centreline to bucket cutting edge.

Why This Bell 315SG Parts Manual Belongs in the Workshop

Backhoe loaders earn their keep by staying on site, and they stop earning the moment an unidentifiable component keeps a machine off the ground for a day while someone guesses at a part number. This 315SG parts manual removes that guesswork. Because the catalogue is organised the way the machine is built, a fitter working on a leaking axle seal can go straight to Group 0200, find the front axle housing and universal joints sheet, read the item number off the drawing and have the exact Bell part number, quantity and any serial-break remark in front of them in under a minute. The same applies to a cracked stabiliser cylinder, a worn swing pin, a failed Park Shift solenoid or a missing cab window latch.

The document also carries the kind of detail that generic aftermarket catalogues leave out. Where a component changed during production, the sheet tells you – for example whether a tie rod assembly is the LH or RH version, whether a hydraulic hose applies up to or from a specific machine serial, whether an item has been superseded by another part number, or whether an item is no longer available and must be serviced with a kit. For a fleet maintaining several 315SG units built across different production runs, that makes the difference between ordering the right part the first time and returning a wrong one. It also lets a stores department build accurate stock lists per machine, and lets a buyer cross-check a quote against the genuine Bell breakdown before committing.

On the hydraulic and electrical side the manual goes well beyond a list of hoses. Groups 2100, 3100 and 3300 break down the main hydraulic pump, ride control kit, loader and backhoe valve sections (priority inlet, boom, bucket, crowd, swing, extendible, selective flow, auxiliary, fifth function manual valve kit and locking control valve), and each section is itemised down to spools, relief valves, seal kits, check valves and orifice fittings. Group 1600 covers the full electrical architecture – battery installations, master disconnect, alternator, monitor panel, headlights, work lights, rotating beacon, roof harness, side and front console harnesses, differential lock switch, return-to-dig switch, engine harness and the wire-lead, Weatherpack and Deutsch terminal kits used to repair them. Together with the engine group’s coverage of the turbocharged 4-cylinder diesel, its balancer shafts, turbocharger, oil lines, fuel system, starter motors and gasket kits, the manual supports both routine parts identification and full component replacement planning.

IMAGES PREVIEW

Instant PDF Delivery

This Bell 315SG parts manual 874800 is supplied as a downloadable PDF. There is no shipping, no waiting for a courier, and no bulky ring binder to store. After payment the file is available immediately, and it opens on a laptop on the workshop bench, a tablet in the cab or a phone alongside the machine. Pages can be printed for the specific job in hand – a single axle sheet, a backhoe valve section, the engine gasket kit list – without dismantling a bound book, and the whole 674-page catalogue stays intact as a searchable reference on your own device. For anyone ordering parts for a Bell 315SG backhoe loader, whether a single axle seal or a complete dipperstick cylinder, having the correct breakdown on hand is the fastest way to get the right part number, first time, every time.