Bucyrus RH200 6050FS Hydraulic Excavator Parts Catalog 200171 – PDF Spare Parts Manual

Description

Bucyrus RH200 6050FS Hydraulic Excavator Parts Catalog – Machine 200171

This is the complete spare parts catalog for the Bucyrus RH200 / 6050FS hydraulic excavator, published under parts book number 3724689 – 000 at revision REV1 (dated Fri, 04 Jul 2014). It is the illustrated parts document referenced against machine serial number 200171, and it covers every assembly group of the machine with exploded illustrations, item references and matching part numbers. Every description is printed in both English and German, so the Bucyrus RH200 6050FS parts catalog can be used without translation by workshops on either side of that language divide.

Instead of a general service book, this RH200 / 6050FS spare parts manual is organised the way Bucyrus designed the machine: by assembly group. Each group gets its own illustration with indexed item bubbles, followed by a parts list giving quantity, part number, SAP number (where shown), page reference and the English/German description. You can order hydraulic hoses by the metre, O-rings by the piece, cylinder seal kits as a set, or a complete swing gearbox, straight off the page.

File Details

• Manual type: Illustrated spare parts catalog (parts book)
• Brand / manufacturer: Bucyrus (Bucyrus HEX GmbH)
• Models covered: RH200, 6050FS
• Machine serial number: 200171
• Document number: 3724689 – 000
• Revision: REV1
• Publication date: Fri, 04 Jul 2014
• Language: English / German (bilingual descriptions on every line)
• Page count: 434 pages
• File format: PDF

Chapters Covered

The Bucyrus RH200 6050FS parts book is divided into numbered assembly groups. Each group has a diagram plus a matching parts list:

• Foreword and how to use the spare parts catalog
• Assembly Groups Overview (numerical and alphabetical index)
• Lower Carriage (00.200) – driving chain, chain wheel drive, tensioning device
• Frame, Catwalk (01.300 / 01.810 / 01.820) – upper carriage frame, steps, walkways
• Scraper / Swing Bearing (01.710)
• Crawler Chassis (06.100 – 06.190) – bottom roller, top roller, chain wheel drive, tensioning device
• Hydraulic Oil Tank (10.101 / 10.102)
• Ballast (12.010)
• Engine (13.000 – 13.300) – engine mounting parts, intake/exhaust, cooling, fuel system
• Fuelling System (14.000 – 14.150) – tank lift, engine oil, grease, gear oil, water
• Cooling System (15.010 / 15.100 / 15.102) – hydraulic oil cooler, water cooling, radiator
• Transmission Gear / Pump Gearbox (16.010 – 16.400) – travel gear, swing gear, track brake
• Coupling / Clutch (17.100 / 17.102)
• Brake System (19.402) – swing brake, track brake
• Hydraulic System, Basic Machine (20.000 – 20.460) – driving, pump, oil cooler, motor cooler, operator’s cab, control block, chain tensioner, swing
• Hydraulic System, Components (22.010 – 22.402) – pumps, travel motor, swing motor, fan motor, HP filter, hydraulic filter, distributor
• Control Block, Valve (23.000 – 23.630) – control block boom, driving, float valve, proportional valve, swing balance valve
• Hydraulic System, Cylinders (24.000 – 24.142) – boom, stick, bucket, dump, tensioning cylinder
• Hydraulic System, Valves (26.132)
• Heating, Ventilation, Air Conditioning (27.400 – 27.420) – air condition, condenser
• Lubricating System / Greasing System (30.000 – 30.300) – boom, stick, rear wall, lower carriage, lube pump
• Electrical System (31.000 / 31.300 / 31.455 / 31.560 / 31.570) – battery install, additional lighting, joystick, pedal
• Cab Module (34.000 – 34.502) – cab module, operator’s cab, platform plate, control column, seat, roller blind, windscreen wiper, washer system, emergency kit
• Panelling / Covering (36.000 / 36.540) – paneling, cover travel gear
• Protective Coachwork (38.050 / 38.060) – cylinder guard, FOPS
• Working Equipment (60.011 – 64.050) – boom bottom, hydraulics, stick, pin no.2, shovel rear wall, shovel front shell, clamshell hydraulics
• Signs and Labels (91.000 – 91.030) – decal kit, plates layout
• Tools and Accessories (92.000 – 92.060) – tool set, maintenance material, vice

Put together, these assembly groups give you the full exploded-view map of the Bucyrus RH200 / 6050FS: every pin, bushing, disk, sealing ring, hose, tube fitting, cylinder seal kit, bracket, plate, safety grill and mounted component, each tied to the position number on its illustration. The document is a true parts catalog rather than a narrative service book – you go straight to the group you need, read off the item number from the diagram, then find the matching line in the parts list underneath.

What This RH200 / 6050FS Parts Catalog Enables You To Do

Because the RH200 and 6050FS share the same parts documentation here, this book serves both. With it in front of you, you can:

• Look up a specific part by its assembly group and item number instead of guessing by photo or sketch.
• Order the right pivot pin, bushing, shim stack, cover plate or welding plate for the working equipment, rather than the nearest-looking one.
• Identify hydraulic cylinder seal kits, wear rings and scrapers for boom, stick, bucket, dump and tensioning cylinders individually or as a complete set.
• Match hoses, tube fittings, split flanges and 12-point screws used in the driving, slewing, cooling, greasing and filter circuits by their part number.
• Trace greasing system distributors, lubricating lines and check valves across the boom, stick, rear wall and lower carriage.
• Identify electrical components such as sensors, relays, batteries, joystick and pedal control units, work lighting and cab wiring items.
• Cross-reference cab module, panelling, safety grills, mirrors, seat and roller blind part numbers.
• Get the right decals, warning signs and indicator plates for machine 200171.
• Find maintenance consumables (filter inserts, seals, O-rings) alongside the assemblies they sit in.

Correct part identification is what keeps a machine of this size working. A wrong pin or an undersized sealing ring may be forced in, but the failure shows up later – often on a component that costs far more than the part you tried to save money on. The RH200 6050FS parts catalog removes that guesswork by tying every position on the machine to a documented part number that Bucyrus used in the original bill of materials for this excavator.

How The Catalog Is Organised

Each assembly group carries an ID number in the header alongside its revision index – for example the boom bottom mounting parts group is shown as 60011 / 3669682 – 000. The illustration and the parts list use the same item numbers so you can trace a component either way. Entries marked in brackets, or shown with a reference to another page, mean that assembly is itself detailed elsewhere in the catalog; quantities marked with a symbol are given in the description column instead of the quantity column. The catalog also uses the standard Bucyrus conventions for current parts, superseded parts and parts that were previously available but are no longer serviced – each with its own icon in the layout.

IMAGES PREVIEW

Instant PDF Delivery

The Bucyrus RH200 6050FS Hydraulic Excavator Parts Catalog 200171 is supplied as a PDF download. There is no shipping, no waiting for a printed book, and no region restrictions. Open it on a workshop PC, a laptop or a tablet, zoom into any exploded view, and print only the pages you need on the bench. Keep the file on the service vehicle for immediate reference at the machine, and share it with whoever is ordering parts so the number on the order sheet matches the number on the drawing.