Epiroc Scooptram ST1030 Spare Parts Catalog 8997822800-002 PDF

Description

Epiroc Scooptram ST1030 Spare Parts Catalog 8997822800-002

This is the full Epiroc Scooptram ST1030 spare parts catalog, published under document number 8997822800-002. It is the parts reference for the Scooptram ST1030 underground loader fitted with the Cummins QSL9 250 HP Tier 3 engine, and it covers the machine from the mainframe and loadframe up through the boom, bucket, cab, powertrain, hydraulics, electrical system, and every option package offered on this loader. Every section is laid out as an illustrated parts breakdown with item callouts that tie directly to part numbers, quantities, remarks, and where applicable Reman numbers, so a parts counter, workshop, or owner can identify and order the correct component without guesswork.

File Details

• Manual type: Spare Parts Catalog
• Brand: Epiroc
• Model: Scooptram ST1030
• Document number: 8997822800-002
• Engine covered: Cummins QSL9 250 HP Tier 3
• Language: English
• File format: PDF
• Page count: 956 pages

Chapters Covered

The catalog is organised into the same major groupings Epiroc uses on the machine itself. Each grouping contains sub-assemblies, each with its own illustrated parts list:

• Service Kit – Parts & Service, Stage 3A Reloaded (250 h, 500 h, 750 h, 1000 h, 1000 OH intervals)
• Mainframe – Loadframe, bogie assembly, boom complete, boom lock, boom up lock installation, safety device locking pin
• Bucket – Bucket 2.0T/M3 EOD, bucket weldment, hinge assembly, bucket attachment, trunnion cap, clamp LH/RH, pushplate, upper push plate, trunnion, cutting edge weldment, wear bar kit, cylinder installation, hose set, hydraulic cylinder, pin set for bucket G3
• Powerframe – Configured powerframe, fuel tank, hydraulic oil tank, return filter, breather filter, gas valve, hood, swivel lock, fender, powerframe parts, steering anchor, engine hoods, hand railing
• Cabin – Cabin installation, cabin, door, driver’s chair, step assembly
• AC Complete – AC installation, air conditioning detail, hose sets, AC evaporator, evaporator Red Dot 24V, electric set, cable sets, compressor
• Pressurizer System – Pressurizer installation, cable set, pressurizer assembly
• Dogbone Assembly – G3, dogbone
• Swivel – Swivel installation
• Wheel Chocks
• Power Unit – Engine installation Cummins QSL9 250 HP, hose sets, engine assembly, engine cradle, diesel engine QSL9 250 HP Tier 3, fan hub, bearing unit
• Air Inlet – Air intake, air filter
• Exhaust System – Exhaust bend, exhaust system, silencer
• Filter Group – Fuel system, fuel filter with heater, hose sets, coolant filter
• Cooling System – Engine cooling Cummins QSL9, hose list
• Radiator Assembly – Radiator installation Cummins QCL, radiator, surge tank ST1020, installation kit, holder
• Fuel Tank Part – Wiggins installation, fuel tank
• Powertrain – Front axle Kessler, rear axle Kessler, hose sets, hydraulic front axle, hydraulic rear axle, differential kits, brake kits, planetary kits, oscillation bearing repair set, block
• Control System – Brake pedal, brake valve, reverse modulation
• Upbox – Upbox ST1020 Cummins QSL9, upbox mod, upbox 16 inch
• Hydraulic Transmission – Converter
• Brake System – Brake system diagram, hose sets, kits, brake valve sets, auxiliary valve, hand pump, brake cooling manifold, accumulators (3.6 L and 1.7 L), gauge and measure panel, high pressure filter
• Wheel Installation – Michelin 18.00R25 XSM D2+PRO, wheel complete, rim
• Fan with Motor – Fan box assembly, fan plate, gear motor 21.1 cc, radiator unit, cooler assembly, hood auxiliary cooler, transmission/hydraulic cooler
• Transmission – Transmission, hose set, filter assembly, wiring and gear group, overhaul kit DF250, bearing kit, seal and gasket kit, front cover group, midship mount group, converter, gear ratio group, shafts (1st stage, 6th stage), clutch assemblies (2nd/3rd and 4th stage), output stage, main case, valve data 3 cross reference, valve, yoke group 8.5C, first stage cover group, pump
• Towing System – Tow hook diagram, hose set, hydraulic cylinder, valve set, tow hook valve block, accumulator 1.7 L
• Hydraulic System – Dump and hoist handle, control kits, mono stick steering control, hoist cylinder set, cylinder assemblies, steering cylinder set, hydraulic fill pump, cable sets, power cables, electric box, splice kit
• Dump System – Dump and hoist installation, hose set, main valve control, main control valve 4-spool pilot, inlet sections, VG35 valves, gear pump, bogie J-block, priority valve, flow control, J-block and door, solenoid valve, gauge panel
• Ride Control System – Ride control installation, hose set, cable set
• Element – High pressure filter element
• Steering System – Hydraulic steer system, hose set, tandem pump, valve set, valve
• Wiggins – Hydraulic fill with Wiggins
• RRC Interface – RRC interface installation, hose set, valve set, remote control valve
• EOD System – EOD installation, hose set, electric set, cable set, valve set, EOD pilot pressure selector valve
• Electrical System – Electrical system, E10 cabin, panel A10, signal relay, display panel, throttle treadle, electronic pedal with idle switch, cable sets C10/C11/C22, W11/W13/W14, EL system E10 cabin and canopy, switch panel A11, wiring, canopy, powerframe, emergency pushbutton, fuse holder, reverse alarm, flash light, electric box A20, cable sets, electric box E30
• Light Set – LED lights set, headlight cabin, headlight loadframe, flood DT04-2P
• Alternator – Alternator 24V/140A
• Battery – Battery installation, battery support, rubber latch
• Flash Light – Amber strobe (ignition on), blue strobe, strobe red with Deutsch connector
• CD Player
• Jump Start Connection
• Light Set – Red and green lights, powerframe assembly set, loadframe assembly set
• ISO Switch – Main power switch, cable set
• Camera – Rear camera option, cab module, powerframe module, cable set, electric set for control
• RRC – Assembly, option on A10, 2XCO relay, cable set, WD104, W27, strobe red, remote system RRC, operator unit RCS4, decoder, electronic unit, cover
• Remote System – Wireless bridge installation
• Fire Suppression System – Checkfire suppression with kill, Checkfire cabin/canopy E10, Checkfire powerframe, hose sets, cable sets, valve sets, pressure switch, Ansul extinguisher and bracket LTA101-30, tank, loadframe module
• Lubrication System – Autolube, powerframe module, loadframe module, hose sets, cable set, grease pump 2 L RV 350 bar, lube bulkhead set
• Label Set – Warning signs, cabin module, loadframe module, powerframe module

What this catalog gives a technician is a complete, parts-numbered map of the entire Scooptram ST1030. Every assembly is drawn with numbered callouts that correspond to a parts table listing the part number, description, quantity, and remarks. Where Epiroc supplies a Reman alternative, the table shows the Reman number alongside the new part. Service kit intervals are shown for 250 h, 500 h, 750 h, 1000 h, and 1000 OH so a workshop can build maintenance parts orders straight from the catalog. Because the same document covers standard and option builds – EOD bucket, ride control, RRC remote, autolube, fire suppression, rear camera – a workshop with a mixed fleet can identify parts for any ST1030 configuration from one reference.

Why This Catalog Belongs on the Workshop Shelf

Epiroc part numbers are specific. Fitting the wrong trunnion, shim, hydraulic cylinder seal kit, hose assembly, or axle bearing kit on an ST1030 leads to premature failure, oil leaks, or worse on a machine that works a full shift underground. This catalog removes the guesswork by showing the assembly as built, with the exact part number that fits the position. For a workshop that keeps a fleet of Scooptram loaders, it means parts can be ordered correctly the first time, from the illustrations alone, without needing to phone a dealer and describe the component over the phone.

IMAGES PREVIEW

The catalog also helps when planning rebuilds. Sections such as the front and rear Kessler axle kits, the transmission DF250 overhaul kit, the hydraulic cylinder seal kits for hoist, steering, tilt and EOD cylinders, and the fan motor gear assembly are all broken out so a shop can quote a rebuild with confidence. The fire suppression, autolube, and electrical sections are covered with the same level of detail, so even option-heavy ST1030s are fully documented.

Practical Details

The file is a high page-count PDF, laid out the same way as the printed parts catalog with page numbers in the footer for easy cross-referencing. The document number 8997822800-002 appears in the header of every section so pages can be traced back to the correct edition. Because it is a PDF, the catalog can be opened on a workshop tablet, a laptop at the parts counter, or a phone on the bench, and any page can be printed to sit next to the machine. There is nothing to ship and nothing to wait for – the download is available immediately after checkout, and the same file can be stored on any device and reprinted as often as needed.

Who This Parts Catalog Is For

This Epiroc Scooptram ST1030 spare parts catalog suits underground mining workshops, contractors maintaining Scooptram loaders, parts departments building maintenance and rebuild kits, and owners who want a parts reference they can trust for a machine that is not always backed by quick dealer support. It is the reference that turns a loader back into a list of orderable part numbers, assembly by assembly, system by system. Once downloaded, it becomes the reference copy that stays with the machine for its whole working life.

Get the Scooptram ST1030 Parts Catalog

With this Epiroc Scooptram ST1030 parts catalog (doc 8997822800-002) you can look up the correct part for any assembly on the loader, from the boom pin and bucket trunnion cap through to the Kessler axle brake kit and the transmission overhaul components. Correct part numbers mean fewer wrong orders, less downtime, and repairs done with the right clearances and matching hardware the first time. The file is delivered as an instant PDF download after purchase – no shipping, no waiting, printable, and readable on any device. Keep it on the workshop computer, put it on a tablet, or print the pages you need for the job in hand.