Case 570T Tier 3 Tractor Loader Backhoe Parts Catalog – July 2015 Illustrated Parts Manual

Description

This July 2015 parts catalog is the complete illustrated reference for the Case 570T Tier 3 Tractor Loader Backhoe. Across 690 pages it breaks the machine into numbered assemblies – engine, transmission, front and rear axles, brakes, hydraulics, steering, wheels, cab climate control, electrical, booms and dippers, buckets, and the platform, cab, bodywork and decals – pairing each assembly with an exploded illustration and a matching part-number table. It is the book you open when a hose, seal, bracket, pin or decal needs to be identified on the machine and ordered by part number the first time.

File Details

• Manual type: Illustrated parts catalog
• Brand: Case
• Model: 570T Tier 3 Tractor Loader Backhoe
• Edition: July 2015 (every page dated 7/2015)
• Language: English
• Page count: 690
• Format: PDF

Chapters Covered

• Pictorial Indexes – Engine, Transmission, Front Axle System, Rear Axle System, Brakes & Controls, Hydraulic Systems, Frames and Ballasting, Steering, Wheels, Cab Climate Control, Electrical Systems, Booms, Dippers & Bucket, Accessories, Platform/Cab/Bodywork and Decals
• Service & Maintenance – Initial Stocking List (List A), Initial Stocking List (List B), Filters
• Engine
• Transmission
• Front Axle System
• Rear Axle System
• Brakes & Controls
• Hydraulic Systems
• Frames and Ballasting
• Steering
• Wheels
• Cab Climate Control
• Electrical Systems
• Booms, Dippers and Bucket
• Accessories
• Platform, Cab, Bodywork and Decals

Pictorial Indexes

Each major system opens with a full-machine illustration keyed to the sections that follow. The engine, transmission, front axle, rear axle, brakes and controls, hydraulic system (four pages), frames and ballasting, steering, wheels, cab climate, electrical, booms/dippers/bucket, accessories and three platform/cab/bodywork pictorials each show the assembly in place with callout boxes that reference the section number and part-number table. You can identify a component on the illustration before flipping to its section, which is much faster than searching a flat parts list.

Engine

Covers the engine assembly and its mounts, cylinder head, cylinder block, oil pan, timing cover, crankshaft and flywheel housing, connecting rods and pistons, camshaft and valves, idler gear, fuel injection pump and timing gears, air cleaner, fuel filter and circuit, fuel line system, fuel feed pump, fuel tank and mounting, fuel injectors, turbocharger, turbo exhaust manifold, exhaust stack and muffler, internal manifold, oil pump, oil filter and cooler, radiator and related parts, radiator hose and mounting, hydraulic oil cooler circuit, charge air cooler tubes, water pump, cooling system assembly, recovery tank and mounting, radiator gasket mountings, fan assembly, and fan pulley and thermostat connections.

Transmission and Driveline

Charge pump (2WD and 4WD), oil filter (2WD and 4WD separately), transmission and mountings for both drivetrains, housing for both drivetrains, dipstick, gear shift lever, 4WD solenoid, input and PTO transmission shaft, secondary shafts for 2WD and 4WD, gear shaft, control valve, torque converter, reverse and primary shaft. The front axle section covers front axle mounting, axle housing, drive shaft, swivel housings and steering cylinder, bevel gear set, differential, double U-joint, wheel hub, final reduction, front axle bushing and supports, knuckle assemblies (LH and RH), steering cylinder hoses and mounting, and the front axle steering cylinder. The rear axle section covers the rear axle and mounting, rear axle housing, bevel gear set, differential, brakes, wheel hub, final reduction, brake caliper, and rear drive shaft. Wheel assemblies for 2WD and 4WD front, and STD and HD rear, are listed separately.

Brakes and Steering

Parking brake assembly, throttle pedal installation, brake master cylinder (three variants), and brake pedals. Steering covers the hydrostatic steering unit, steering wheel and column, and power steering hoses.

Hydraulic Systems

The biggest single area in the catalog. Covers the main hydraulic pump, pump intake and outlet hoses, hydraulic oil tank and mounting, tank and filter, loader and backhoe valve and hoses, hammer valve (two variants), anti-roll controls, self-leveling linkage and the 6-in-1 bucket hydraulic system, loader arm assembly, stabilizer cylinder hydraulic lines and cylinders (LH and RH), loader lift and tilt cylinder tubing and hoses, loader tilt and lift cylinders, the 2-spool loader valve controls and individual sections (inlet, bucket, lift, outlet), 3-spool loader controls and lever assembly, stabilizer section, backhoe console (6-spool and 7-spool), tower assembly for the 6- and 7-spool backhoe control, 7-spool extendhoe pedal assembly, extendhoe section, individual backhoe valve sections (inlet, boom, swing, bucket, dipper, stabilizer, outlet), positioning cylinder, boom cylinder and its hoses and tubing, backhoe boom cylinder hoses, dipper cylinder and hoses, backhoe bucket and dipper cylinder hoses, uni-aux boom and dipper, backhoe bucket cylinder and its hoses and tubes, extendhoe dipper boom tubes and hoses, extendable dipstick, extendhoe dipper cylinder, bucket cylinder tubing, swing cylinder, backhoe swing cylinder hoses, swing tower/slide frame sub-assembly (six variant pages), and side shift cylinder hydraulic lines.

Electrical Systems

Engine sensor and switch, engine harness, transmission sensors for 2WD and 4WD, transmission wire harness, AC control cab harness, horn and wire harness, starter motor (standard and cold start), cold start kit, alternator, battery, battery cables, cabin beacon, work lamp harness, horn and sensor mounting, backup alarm harness, cab harness wire terminals, cab wire harness, front light harness, beacon harness, and washer bottle reservoir.

Booms, Dippers and Buckets

Backhoe bucket assemblies in 12 inch, 18 inch, 24 inch, 0.26 CUM and 36 inch, loader bucket assemblies in 89 inch and 1.2 CUM, 6-in-1 buckets (three variants), standard backhoe bucket assembly, standard backhoe boom assembly, and standard backhoe dipper assembly.

Frames, Ballasting and Accessories

Chassis-mounted components and rear cover, counterweight (211 kg and 335 kg options), and the tool box with its full contents list – spanners, sockets, Allen keys, screwdrivers, pressure indicator, lock key pouch, swing lock pin, O-ring kit, grease pump hose, ignition key, cabin lock key and more.

Platform, Cab, Bodywork and Decals

Tilt hood (two pages), brand and model decals, decals (four grouped pages), fenders (LH and RH), fender guard, operator seat (L/CAB), HVAC cab, cab and platform (three pages), cab frame, front exterior components (six pages), cab mounting, cab rear mount, cab floor, lower external cab trim, cab interior campaign work, front console (three pages), armrest compartment, cab door LH, door assembly front LH, glass latch hold LH and RH, rear window LH, cab door RH, cab door assembly front RH, cab door rear window RH, cab door glass, cab front window, windshield glass (three pages), upper trim, pillar trim plate, side console (four pages), and weather control dashboard (with AC and without).

Service and Maintenance Stocking Lists

Two initial stocking lists (List A and List B) give the fast-mover and wear-item parts a service department should keep on the shelf – pins, spacers, hydraulic cylinders, seal kits for every cylinder, bushes, bolts, nuts, bucket teeth, throttle and parking brake cables, radiator hoses, oil coolers, filters, sensors, gaskets, O-rings and hoses. The filters section is a single illustrated page listing the primary air element, safety air element, fuel filter pre-assembly, hydraulic oil filter and tank-mounted return filter.

Why This Catalog Works in the Workshop

Every section is structured the same way: a clean exploded illustration, a reference-number legend, and a table with reference number, part number, quantity and description. Because the same reference-number system runs end to end, a part spotted on the machine can be traced through the correct system page, confirmed against the illustration, and ordered by the exact part number printed in the table – no guessing, no shorthand, no cross-referencing to a separate catalogue. The July 2015 date on every page means the part numbers reflect the Tier 3 build of the 570T, which matters when the machine you are working on is not the earliest 570T variant.

For anyone keeping a 570T Tier 3 in service – owners, independent mechanics, dealer parts counter staff, or a maintenance team supporting a mixed fleet – this is the most direct route from ‘what is this part’ to ‘here is the number.’ Hydraulic hoses and cylinders alone can run to hundreds of part numbers across the loader, backhoe, stabilizer and extendhoe circuits; having the illustrated lookup cuts hours out of ordering the right one.

Get the File

IMAGES PREVIEW

The Case 570T Tier 3 Tractor Loader Backhoe Parts Catalog (July 2015) is delivered as an instant PDF download after checkout. There is no shipping, no waiting for a disc, and no subscription. The file opens on any desktop, laptop, tablet or phone with a PDF reader, and every page prints cleanly for a binder at the machine, in the workshop, or at the parts counter. Keep a copy on the service laptop and a printed set in the cab, and the next repair starts with the right part number instead of a phone call.