Case 580M Series 2 Loader Backhoe Parts Catalog 2004 PDF Parts Manual 7-9030NA

Description

Case 580M Series 2 Loader Backhoe Parts Catalog — Publication 7-9030NA

This is the complete Case 580M Series 2 Loader Backhoe Parts Catalog, published under part number 7-9030NA and revised November 2003 for the machine that first became available in February 2004. It is a workshop-grade parts reference: every assembly is broken down into exploded diagrams with call-outs, part numbers, quantities, and reference tables so a technician or parts counter can identify the exact component needed. If you maintain, repair, rebuild or restore a 580M Series 2, this is the document that turns a vague description into a firm part number.

File Details

• Manual type: Illustrated Parts Catalog
• Brand: Case (CNH America LLC)
• Model: 580M Series 2 Loader Backhoe
• Publication part number: 7-9030NA
• Edition / revision: Revised November 2003
• Machine introduction date: February 2004
• Language: English (with Latin American Spanish and Canadian French decal listings)
• File format: PDF
• Page count: 712 pages

Chapters Covered

Each section is structured the same way: an exploded drawing with numbered call-outs, a reference table listing the call-out number, part number, year/serial applicability, quantity, and description, plus footnotes for parts shown on other figures or supplied only in kit form.

General Information

The front matter explains how the catalog is laid out: figure number, sequence code, page number within the sequence, date of printing, the figure description, and reference call-outs. It defines the YR/SN column codes used throughout (Before 01/85, From 01/85, BTW 01/85 & 02/02, BSN serial and ASN serial) so a part number can be matched against the correct build window before ordering. Right-hand and left-hand conventions are defined relative to the operator seated in the correct operating position, and the abbreviation glossary covers hardware, thread, fitting and unit-of-measure codes used on every page.

Section 2 — Engine

Covers radiator mounting, deaeration system, radiator assembly with or without air conditioning, air cleaner and intake parts for turbocharged and naturally aspirated engines, muffler and exhaust system in all three variants, engine mounting, cylinder block, oil pump and pan, cylinder block covers, breather, cylinder head, valve mechanism, intake and exhaust manifolds, crankshaft, pistons and connecting rods, flywheel, crankshaft pulley, dynamic balancer gears and shafts (including the 2830952 housing), camshaft, turbocharger, engine oil piping, oil filter and cooler, water pump, cooling system, thermostat, fan drive, power take-off and lift hook.

Section 3 — Fuel System

Fuel lines, fuel reservoir (31 gal and optional 40 gal tank assemblies), in-line fuel filter, hand and foot throttle controls, fuel injection pump, the complete fuel injection system broken across several pages, injection tube kits, fuel filter, and the fuel lift pump with its O-ring, screw and hydraulic connector call-outs.

Section 4 — Electrical System

Starter and alternator in full exploded form, starter and alternator mounting, engine harness mounting and connections, battery cables for models without cold start, dual-battery cold start arrangement, cold start grid heater and controller, front console harness and switches, front console harness mounting, side console harness and switches, instrument panel front and side covers, instrument cluster, ROPS canopy and ROPS cab lamp assemblies, individual lamp assemblies, horn and backup alarm, rotating beacon, radio antenna and radio harness, plus the backhoe auxiliary hydraulic electrical circuits for uni-directional and pilot-control machines.

Section 5 — Tracks / Steering

Steering wheel and column, steering hydraulics, steering column assembly, and the complete front steering axle (86990837) from mounting through housing, swivel housing, steering cylinder, hub and bearings, to front wheels and tires.

Section 6 — Power Train

Front drive axle mounting, housing, swivel housing, steering cylinder, axle shafts, planetary, differential, ring and pinion, front axle drive shaft, transmission cooling system, transmission mounting, oil filter, 2WD and 4WD housings, oil pump, shifter mechanism, idler and primary shaft, input shaft, secondary shaft, 4WD output shaft, control valve, 4WD solenoid valve, rear wheels and tires, rear axle mounting, differential lock, rear axle housing, differential, ring and pinion, differential lock detail, planetary and rear axle drive shaft.

Section 7 — Brakes

Rear axle differential brake, parking brake, brake pedals, brake master cylinder hydraulics, master cylinder assembly, and parking brake controls.

Section 8 — Hydraulics

The largest section of the catalog. Starts with the hydraulic pump, filter and loader valve, continues through loader valve and filter to backhoe valve routing, cooler and return lines, and then every cylinder: loader lift, loader bucket, loader clam (two pages), backhoe stabilizer with and without pilot controls, backhoe swing with and without pilot controls, backhoe boom, backhoe dipper, backhoe bucket with and without extendable dipper, extendable dipper, plus the pilot control valve and joystick assemblies for 6, 7 and 8 spool configurations with and without auxiliary hydraulics, pilot control joysticks, ride control solenoid valve, loader quick coupler hydraulics, coupler valve (87435909), equipment hydraulic pump, loader control valve assemblies (two and three spool), backhoe control valve assemblies (6, 7 and 8 spool, with and without pilot controls), individual valve sections, pressure reducing valve assemblies, joystick valves with horn, uni-directional and bi-directional buttons, swing cushion valve, ride control accumulator, oil filter, and every individual cylinder assembly.

Section 9 — Chassis / Attachments

Loader lift and bucket controls, loader clam controls, loader self-leveling, loader lift frame, loader linkage, loader long lip buckets (82 in and 93 in), loader clam bucket, loader valve guard, tool quick coupler, backhoe control tower covers and supports with and without pilot controls, control tower boots and seals, control tower levers and boom latch, backhoe controls for foot swing and hand swing on standard and extendable dipper machines, backhoe auxiliary hydraulic controls, stabilizers, plates and pads, swing tower and swing cylinders, boom and swing tower, boom latch with and without pilot controls, dipper and bucket, extendable dipper, universal and standard backhoe buckets from 305 mm (12 in) through 914 mm (36 in), front counterweight, chassis and pod mounts, air inlet screen, hydraulic oil tank, battery and tool box, radiator wrapper, hood side panels, hood grille, floor plates and floormats, left-hand fender cover and rear closure panel with storage tray and cup holder, fender extensions, mud guard, seat mounting, standard / mechanical suspension / air suspension seat assemblies, cab glass and mirrors, cab frame and covers, cab doors and door mounting, right-hand cab window, rear cab window, windshield washer, wipers, headliner, cab air filter, blower housing and ventilation ducts, cab heater, air conditioning lines and evaporator core, condenser and receiver-drier, air conditioning compressor, ROPS canopy frame and covers, canopy glass, canopy wiper and windshield washer, rear-view mirror mounting, slow moving vehicle emblem, and the complete set of decals for English, Latin American Spanish and Canadian French markets.

What a Parts Catalog Like This Actually Does for You

Ordering the wrong part costs more than the part. This catalog removes the guesswork by tying every component to a figure number, a reference call-out, a quantity, and a build window. When the counter asks for a serial number split or a year range, the YR/SN column already tells you which part belongs on your machine. When a component is not sold separately, the catalog says so and points you at the correct assembly or kit instead — no returns, no stalled repair.

The value goes beyond the parts counter. Rebuilding a hydraulic cylinder? Section 8 shows every seal, gland, piston, rod and backup ring in the assembly, with a dedicated seal kit where one is offered. Chasing an electrical fault? Section 4 walks the harness from engine through front console and side console to every lamp, switch and beacon. Replacing a cab door, window or wiper? Section 9 documents glass, seals, hinges, latches and gas struts individually so you can replace only what failed.

Because the catalog covers both turbocharged and naturally aspirated engines, 2WD and 4WD, foot swing and hand swing backhoes, standard and extendable dippers, and machines with or without pilot controls, it serves the entire 580M Series 2 family from one document. You do not need a separate book for each configuration.

IMAGES PREVIEW

Delivery is instant. The PDF downloads immediately after purchase and opens on any laptop, tablet or phone. Print the pages you need for the shop, keep the file on a service tablet, or archive it with the machine records — no shipping, no waiting, no torn paper manual in a binder. Whether you are a technician, a fleet manager, a parts counter specialist or an owner restoring a 580M Series 2, this is the reference that makes the job accurate the first time.