CASE 770EX & 770EX MAGNUM Backhoe Loader Parts Catalogue – 47573035 Revision 04 PDF Download

Description

CASE 770EX & 770EX MAGNUM Backhoe Loader Parts Catalogue — Print 47573035, Revision 04

This is the full CASE 770EX and 770EX MAGNUM Backhoe Loader Parts Catalogue issued under Print No. 47573035, Revision 04, dated 09/2016. It is the illustrated bill-of-material reference for the entire machine, listing every serviceable part with its part number, description, per-assembly quantity and the machine serial-number effectivity that tells you exactly which build a given part applies to. Groups run from 100 (Engine) through 1700 (HVAC Cabin), covering standard 2WD machines, 4WD drivelines, Extendhoe, Bottom Dump Bucket and HVAC cab options.

File Details

• Manual type: Parts Catalogue (illustrated bill of material)
• Brand: CASE
• Models covered: 770EX, 770EX MAGNUM Backhoe Loader
• Language: English
• Page count: 369 pages
• File format: PDF
• Print number: 47573035
• Revision: 04
• Issued: 09/2016

Chapters Covered

The catalogue is organised by group number, each group listing the assemblies, sub-assemblies and individual parts that make up that section of the machine. Group index pages at the front direct you to the correct page for every assembly.

• 100 — Engine & Component Installation
• 200 — Cooling System
• 300 — Transmission (2WD)
• 400 — Rear Axle
• 500 — Front Axle
• 600 — Hydraulic System
• 700 — Cabin
• 800 — Body & Structure
• 900 — Buckets
• 1000 — Wheels
• 1100 — Electrical System
• 1200 — Stickers & Tools
• 1300 — Front Axle – 4WD (Optional)
• 1400 — Transmission – 4WD (Optional)
• 1500 — Extendhoe (Optional)
• 1600 — Bottom Dump Bucket (Optional)
• 1700 — HVAC Cabin (Optional)

Group 100 — Engine & Component Installation

Covers the engine mounting brackets, silent-block supports and hardware, alternator mounting bracket and V-belt, throttle mounting brackets (front and rear), air cleaner assembly and mounting with pre-cleaner, exhaust muffler and exhaust stack assemblies, engine cooling fan and spacer, fuel filter and circuit, fuel filter/water separator, and the fuel tank with sender, filler neck, step and mounting plates. Part numbers, effectivity codes and quantities are listed for each item.

Group 200 — Cooling System

Radiator assembly, radiator cap, coolant hoses (upper and outlet), recovery tank and mounting, hydraulic oil cooler circuit with check valve and hoses, charge air cooler assembly and its tubes. Includes worm-gear clamps, drain cock and mounting hardware.

Group 300 — Transmission (2WD)

Two-wheel-drive transmission assembly and mountings, dipstick and tube, gear shift lever and knob, charge pump and oil filter assemblies, transmission housing, input and PTO shafts, reverse and primary shaft, secondary shaft, gear shift mechanism, and the control valve with solenoid, pistons, springs and seal kit.

Group 400 — Rear Axle

Rear axle and mounting, rear axle housing, bevel gear/pinion set, differential assembly, brakes with plates, pistons and self-adjuster kit, wheel hub and hub kit, final reduction planetary carrier and gears, brake caliper and repair kits, and the rear drive shaft with half-shafts.

Group 500 — Front Axle

Front axle bushing and supports with pivot pin, king pins and bushings, steering knuckle assemblies (LH and RH), front axle hub assemblies with wheel bearings, seals and hub covers, plus the steering cylinder, tie rod and steering hoses.

Group 600 — Hydraulic System

Hydraulic oil tank with floor plate, step and tank-mounted return filter element; main hydraulic tandem pump and seal kit; hydrostatic steering unit with its seal kit; pump intake and outlet hoses; loader and backhoe valve banks and hose assemblies; loader lift, tilt and bucket cylinders with their tubing and hoses; backhoe swing, boom, dipper and bucket cylinders and hydraulic lines.

Group 700 — Cabin

Tilt hood panels and mounting, front grille and wrapper, counterweight options, brake master cylinders and reservoir, operator seat, floor mat, rear console and extendhoe console, parking brake lever and cable, hand and foot throttle controls, steering wheel and column, brake pedal support and switches, cabin doors (LH and RH), rear windows, overhead window assembly, and the full cabin trim and lock assemblies.

Group 800 — Body & Structure

Chassis and stabilizer mountings, stabilizer feet and cylinders, mechanical boom lock, swing tower assembly with bushings and pins, transport lock hook, loader arm assembly, anti-roll controls, self-levelling linkage, swing cylinder, sliding frame, backhoe boom and dipper assemblies with their pins and bushings, bucket linkage, backhoe control lever assemblies for both 6-spool and 7-spool valves, 2-spool loader valve mounting, and control valve support brackets.

Group 900 — Buckets

Backhoe bucket assemblies in 12 in, 18 in, 24 in, 36 in and 0.26 cu.m. sizes, each with centre teeth, side cutting teeth and mounting hardware; loader bucket assembly 89 in; loader bucket spill guard assembly 89 in.

Group 1000 — Wheels

Front wheel assembly for 2WD and 4WD, rear wheel assembly in standard and heavy-duty configurations, with rim, tyre, flap and tube part numbers.

Group 1100 — Electrical System

Main wiring harness, engine harness, transmission harness, cabin harness, front panel harness, declutch harness, tail lamp harness, jumper and horn harness, headlight and horn harnesses, battery mounting with positive and negative cables, horn mounting and return-to-dig sensor, cabin exterior components including wiper motor, antenna, speakers and radio, rear lights, instrument cluster, speedometer, dashboard console, RH console bezel, and the buzzer unit.

Group 1200 — Stickers & Tools

Information symbol decals, warning symbol decals, cab warning decals, model identification decals (770EX and 770EX MAGNUM specific), floor plates, reflectors, and the tool kit including spanners, sockets, screwdrivers, grease pump, pressure indicator and key pouch.

Groups 1300 & 1400 — 4WD Front Axle & 4WD Transmission (Optional)

4WD front axle mounting, axle housing, drive shaft with universal joint, swivel housings and steering cylinder, bevel gear/pinion set, differential, double U-joint, wheel hub and final reduction. The 4WD transmission group adds the matching dipstick, gear shift lever, charge pump, oil filters, housing, input and PTO shafts, reverse and primary shaft, secondary shaft, gear shift mechanism, control valve, torque converter and 4WD solenoid.

Groups 1500, 1600 & 1700 — Extendhoe, Bottom Dump Bucket & HVAC Cabin (Optional)

Extendhoe dipper boom tubes and hoses, extendhoe dipper cylinder, extendable dipstick, control pedal assembly and the 7-spool control valve split into inlet, extendhoe, boom, swing, bucket, dipper, stabilizer and outlet sections. Bottom Dump Bucket group covers the 6-in-1 bucket assembly with dozing blade, BDB bucket cylinders, hydraulic system and the 3-spool loader control valve with tilt, lift, BDB and outlet sections. HVAC cabin group adds glass assembly, brake pedals, steering wheel and pump, brake master cylinder, front and RH consoles, parking brake, throttle control, LH console with assistant seat, cabin panels, HVAC cab ducting, condenser mounting, compressor mounting and A/C hose connections.

Why This Parts Catalogue Matters in the Workshop

Ordering the wrong part number on a backhoe loader is an expensive mistake — the 770EX and 770EX MAGNUM were built with multiple configurations (2WD and 4WD, standard and Extendhoe, with and without HVAC, and different engine ratings), and many components differ between them. This catalogue solves that problem by pairing every exploded illustration with a numbered bill of material that tells you the exact part number, description, quantity required per assembly, and the serial-number effectivity window the part was fitted to. You can identify a part visually from the drawing, cross-reference the item number in the table, and confirm it is the correct variant for the machine in front of you before you place the order.

Who This PDF Is For

Owners and operators of CASE 770EX and 770EX MAGNUM backhoe loaders who maintain their own machines; independent repair shops and mobile mechanics who need fast, accurate part identification; parts counter staff and spare-parts dealers who must quote the right number the first time; and rebuilders restoring or reconditioning an Extendhoe, 4WD or HVAC-equipped machine where the optional groups are essential.

What You Can Do With It

• Look up the correct CASE part number for any assembly on the machine without relying on guesswork or an outdated counter microfiche.
• Identify parts from exploded diagrams, then confirm quantity and effectivity before ordering.
• Rebuild hydraulic cylinders (loader lift, tilt, bucket, backhoe boom, dipper, bucket, swing, stabilizer, extendhoe) using the correct seal kits, backup rings, wipers and O-rings shown in each cylinder breakdown.
• Service the transmission in either 2WD or 4WD form — synchro kits, bearings, gears, shafts, control valves and charge pumps are all itemised.
• Work on the electrical system with confidence, using the harness part numbers and routing references for main, engine, transmission, cabin, front, tail and declutch circuits.
• Source the correct decals, reflectors, warning symbols and model identification stickers for a restoration or resale preparation.
• Reference the full hydraulic valve banks (2-spool, 3-spool and 7-spool) section by section, including relief valves, load check valves and end group kits.
• Quote and order parts for optional equipment — Extendhoe, Bottom Dump Bucket and HVAC cab — which is often missing from generic parts lookups.

IMAGES PREVIEW

Instant PDF Delivery, No Shipping

This is the complete CASE 770EX / 770EX MAGNUM Backhoe Loader Parts Catalogue, Print No. 47573035, Revision 04, issued 09/2016, supplied as a 369-page PDF. There is no physical book to ship, no waiting for a courier, and no risk of a torn or missing page in transit. The moment your order is confirmed you receive the file, ready to open on a workshop PC, laptop, tablet or smartphone — and to print the specific group pages you need and take them straight to the machine. For anyone who keeps a backhoe loader earning, having the correct part number, quantity and effectivity for every assembly at your fingertips is the difference between a quick repair and a costly wrong-order delay. Order now and download your copy instantly.