CAT Roof Bolte RB230 ROOF BOLTER Parts Manual – PDF DOWNLOAD

Description

CAT Roof Bolter RB230 ROOF BOLTER Parts Manual – PDF DOWNLOAD

TABLE OF CONTENTS:

CAT Roof Bolter RB230 ROOF BOLTER Parts Manual – PDF DOWNLOAD

FOREWORD A3
INDEX A5
ELECTRICAL SYSTEM 2
ASSEMBLY, 24″ CABLE REEL,
LONG BUMPER 2
CABLE REEL ASSY 4
DWG-SCHEMATIC & WIRING DIA 6
SPOOLER SHAFT ASSEMBLY 10
MCI MODEL 27434-LPHD AREA LT 12
MCI MODEL 27464-LP2 AREA
LIGHT 14
MOTOR, RELIANCE 75HP 16
MCI FLUORESCENT LIGHTING,
HIGH 18
ELECTRICAL AS 20
LIGHT AS-HOUSING 22
WIRING DIAGRAM 24
FRAME AND BODY 28
CHASSIS FRAME ASSEMBLY
RB2-88A 28
WELDMENT, REAR FRAME RB2-88A 30
PRE-DUSTER INSTALLATION 34
MACHINERY MAIN FRAME 38
REAR FRONT FRAME 40
MOTOR AND ROOTS WHISPAIR
BLOWER 42
DUST TANK 44
TAB, DUST BOX 46
LEVELING LINK WELDMENT (RH) 48
MACHINE FOOT T-BAR
ASSEMBLY (RB2-52) 50
CENTER SECTION ASSEMBLY 52
DUST COLLECTION 54
LEVELING LINK WELDMENT 56
REAR TIRE COVERS 58
LEVELING STRUT (MACH) 60
WELDT (MACH) TENSION LINK 62
PRE-DUSTER ASSEMBLY (LH) 64
PRE-DUSTER ASSEMBLY (RH) 66
STRUT, LH LEVELING ASSY 68
LUBRICATION, GREASE ZONE KIT 70
WELDT LEVELING LINK (LH) 72
COVERS AND TRAYS RB2-52A/88A 74
WELDT SECONDARY STRUT 10′
T/B 78
CYLINDER, SECONDARY SUPPORT 80
WELDMENT, FRONT FRAME
RB2-88A 82
T-BAR AS 84
BASE PARTS-88A 92
LT FIRE SUPPRESSION, RB2
ROOF BOLTERS 94
ASSEMBLY FRONT COVER RB2-
88A 96
HYDRAULIC SYSTEM 98
FILTER GP-O (BSC) 98
OIL SIGHT GAUGE AS 100
ROTATION MOTOR-650 RPM 102
WHEEL, FR CONTROL MANIFOLD 104
CYLINDER 6 B 4 17/64 S/ 106
TEST MATE INSTALLATION 108
CONTROL VALVE L H BOOM 110
CONTROL VALVE R H BOOM 112
COMPONENTS FOR TESTBLOCK 114
PRIMARY SUPPORT CYL 10′ TBAR
116
HYDRAULIC OIL TANK 118
CYLINDER 1 1/4 B 12 S/ 120
FILTER, OIL/MANIFOLD 122
CONTROL VALVE, ATRS / VERT
ART FUNT 124
CYLINDER, STAB RB2-88A 126
VALVE BANK 128
CYLINDER AS 130
FEED CYLINDER 132
VALVE, RELIEF (DUAL) 134
VALVE, SECTIONAL CONTROL 136
VALVE BANK 138
STEERING CYLINDER PIN ASSY 140
REEL MOTOR ASSEMBLY 142
AR&STEER C MANIFOLD 144
OIL TANK SUB-ASSY RB2-52A/88A 146
HOSE CAP ASSY 148
INTG VALVE SPRT ARM FUNC 150
VALVE BANK ASSEMBLY 152
VALVE 154
BLOCK 156
VALVE AS 158
HYDRAULIC AS 160
IMPLEMENTS 164
DRILL BOOM ASSEMBLY 164
DRILL BOX 166
LOWER CRADLE ASSEMBLY 168
DRILLING ASSEMBLY (RH) 170
WELDT (MACH) UPPER CRADLE 172
ASSEMBLY, DRILL BOX CARRIER 176
DRILLING ASSEMBLY, LH 180
TORQUE GAUGE INSTALLATION 184
MACHINE ARRANGEMENT 186
DRILL BOOM, MISC PARTS 186
MACHINE ARRANGEMENT 188
OPERATOR STATION 190
OIL LEVEL SWITCH AND LIGHT
ASSEMBLY 190
TRAM CANOPY, 3’8″ MIN HGT 192
VALVE, FOOT REWORK
ASSEMBLY 194
TRAM STATION ASSEMBLY 196
CYLINDER ASSEMBLY 198
CABLE REEL VLV PEDAL 200
STARTER ENCLOSURE RB2
ROOF BOLTER 202
SEAT ASSY SR250 204
STARTER BOX COVER ASSEMBLY 206
LIQUID LEVEL ASSEMBLY 208
STARTER ENCLOSURE ELE KIT 210
TRAM CANOPY, SR200-A 212
HYD D S C INSTALL RB2-88A 216
POWER TRAIN 218
TORQUE HUB/FAIRFIELD 218
MOTOR, CHAR LYNN 2000 SERIES 222
MICO BRAKE ASSEMBLY 224
WHEEL UNIT INSTALLATION, 16
HOLE MTG 226
HUB, BRAKE AND MOTOR, RB2,
16 HOLE MTG 228
HUB AND MOTOR, RB2, 16
HOLE MTG 230
SERVICE EQUIPMENT AND
SUPPLIES 232
PAINT LUBE AND TAG
PLACEMENT ASSEMBLY 232
UNCATEGORIZED LOWER LEVELS 238
SEAT ASSY SR250 238
OIL TANK SUB-ASSY RB2-52A/88A 240
PART NUMBER INDEX B1

DESCRIPTION:

RP901000

CAT Roof Bolter RB230 ROOF BOLTER Parts Manual – PDF DOWNLOAD

1. MACHINE IDENTIFICATION

• Cat machines are identified by Product Identification Numbers (PIN). Some components included in a machine may be identified by Serial Numbers (S/N). Typical components that will be serialized include engines, transmissions, bulldozers, and rippers.
• The machine and engine are further identified by arrangement numbers and in some cases modification numbers. These numbers are shown on the product identification plate(s) and on the master plate in the operator’s compartment.
• Cat dealers need all of these numbers to determine accurate parts identification. Effective First Quarter 2001 the Cat Product Identification Number (PIN) changed from 8 to 17 characters.
• In an effort to provide uniform equipment identification, Caterpillar and other construction equipment manufacturers are moving to comply with the latest version of the product identification numbering standard.
• Non-road machine PINs are defined by ISO 10261. The new PIN format will apply to all Cat machines and generator sets. The PIN plates and frame marking will display the 17 character PIN. The new format will look like the following:

Where:

(1) – Caterpillar’s World Manufacturing Code (characters 1- 3)

(2) – Machine Descriptor (characters 4-8)

(3) – Check Character (character 9)

(4) – Machine Indicator Section (MIS) or Product Sequence Number (characters 10-17). These were previously referred to as the Serial Number. Machines and generator sets produced before First Quarter 2001 will maintain their 8 character PIN format. Components such as engines, transmissions, axles, etc. and work tools will continue to use an 8 character Serial Number (S/N).

2. ORDERING PARTS

 WARNING

when replacement parts are required tor tnIs product, Caterpillar recommends using Cat re- placement parts or parts with equivalent specifi- cations including, but not limited to, physical dimensions, type, strength and material Failure to heed this warning can lead to prema- ture failures, product damage, personal injury or death.

• Quality Cat replacement parts are available from Cat dealers throughout the world. Their parts inventories are up to date and include all parts normally required to protect your investment in Cat machines.
• Dealers may offer repair kits or remanufactured parts to allow selection of the most effective repair alternative for a particular situation. When ordering parts, your order should specify the quantity, part number, part name, and the serial number/product identification number of the machine for which the parts are needed

3. PARTS MANUAL ORGANIZATION

Product information in this manual is presented as “information elements” that represent all of the components for the specific model. Engine Arrangement and Seat Group are examples of information elements. The information elements are organized alphabetically by part name and secondarily by part number within each major section of the manual.

4. TABLE OF CONTENTS

A table of contents (TOC) is found at the beginning of the manual. The TOC lists each section of the manual with a complete list of all information elements organized as they appear in the manual. Page numbers are provided for quick reference to detailed parts identification illustrations and serviceable consist lists.

5. INDEX

The index located near the front of the manual is an alphabetical listing of all information elements included in the manual. Page numbers are provided for quick reference to detailed parts identification illustrations and serviceable consist lists.

FILE DETAILS:

CAT Roof Bolter RB230 ROOF BOLTER Parts Manual – PDF DOWNLOAD

Language : English
Pages :263
Downloadable : Yes
File Type : PDF
Size:10.4 MB

CAT ROOF BOLTE RB230 ROOF BOLTER PARTS MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.M