CLARK C20 C25 C30 C33(35) L Forklift Parts Manual – Lot 9839 PDF

Description

CLARK C20 C25 C30 C33(35) L Forklift Parts Manual

This is the full CLARK C20 C25 C30 C33(35) L forklift parts manual identified as Lot 9839, built for trucks carrying the serial format P232L – XXXX – 9839 CNF (HMC, Tier 4). It is the illustrated parts catalogue a workshop, parts counter or fleet maintenance team uses to look up component group numbers, verify assemblies and order the correct replacement parts for the C 20, C 25, C 30, C 33 and C 35 L series lift trucks.

File Details

• Manual type: Parts Manual (부품 매뉴얼 / Parts Manual)
• Brand: CLARK (CLARK Material Handling)
• Model: C 20/25/30/33(35) L
• Serial number range: P232L – XXXX – 9839 CNF (HMC, Tier 4)
• Publication date: Jan. 2013
• Language: English and Korean (bilingual parts descriptions)
• File format: PDF

Chapters Covered

• Engine Mounting (00-687)
• Engine Gasket Kit (00-688)
• Cylinder Head & Covers (00-690)
• Crankcase (00-691)
• Cooling System (01-339, 01-349, 01-360)
• Non Pre-Cleaner GP, Accelerator System, Pre-Cleaner Option
• Accel Control Assembly, Air Cleaner Assembly, Indicator Light Installation
• LPG Tank Mounting and Swing Down Bracket Assemblies
• Switch Installation, Fuel System, Intake & Exhaust Manifold
• Precleaner / Air Cleaner Installation, Exhaust System, Fuel Line
• Transmission Pump & Hydraulics, Convertor Housing and Pump Drive
• Converter Housing & Clutch Assembly, Speed Limit Installation
• Transaxle Assembly, Transmission Case and Differential Assembly
• Transmission Clutch Pack, Control Cover
• Transaxle Mounting, Transmission Cooling Lines
• Electrical Control, Alternator Assembly, Battery Mounting, Alternator
• Key & Directional Switch Installation, Head Lamp Installation
• Rear Work Light, Combination Lamp, Lamp and LED Lights Installation
• Strobe Light Mounting and Strobe Light
• Back-Up Alarm Installation, Head & Turn Signal Light Installation
• Rear Accessory Mounting, Static Electricity Discharger
• Electrical Wiring (Instrument) and Electrical Wiring (Main)
• LPS Construction, Seat Operated Brake
• Drive Axle, Drive Axle Filter Breather Mounting
• Brake Assembly, Drive Wheel & Tire Mounting
• Steer Wheel & Tire Mounting, Drive Wheel & Tire (Solid Type)
• Dual and Wide Drive Wheel & Tire Mounting
• Brake & Inching Lines, Parking Brake Linkage
• Steer Column & Gear Mounting, Steering Unit, Steering Column
• Steering Wheel Mounting, Hydraulic Steering Lines, Hydraulic Return Lines
• Steer Axle Mounting, Steer Cylinder, Steer Axle Assembly
• Hydraulic Pump, Hydraulic Tank & Components Mounting
• Hydraulic Valve Mounting (2 / 3 / 4 Spool)
• Main Control Valve 3-Spool and 4-Spool (Push Button)
• Hydraulic Control Valve 2 / 3 / 4 Spool
• Tilt Limit with Override, Hydraulic Lift & Tilt Lines, Hydraulic Supply Lines
• Tilt Cylinder, Tilt Cylinder Mounting, Tilt Amount Group
• Accumulator Installation, Relief Valve Assembly, Selector Solenoid Valve
• Load Back Rest, Carriage Assembly, Upright Mounting
• Overhead Guard Cover, Rear Wiper Installation, Cab Door Sash Assembly
• Enclosed Cab, Back Mirror, Overhead Guard Mounting
• Hood Mounting, Sheet Metal & Trim, Seat Arm/Rest Assembly
• Frame & Counterweight, Frame Tank Bottom Plug
• Lead Wire Ground, Electrical Components (Cab)
• Noise Reduction Installation, Seat Assembly, Floor Plate Mounting
• Seat Mounting, Seat Assembly (Suspension), Cowl Mounting
• Pod Installation, Cab Mounting, Overhead Guard Mounting
• Model & Specification Decals, Decals, Truck Fluids
• Storage Console, Heater Installation, Seat Wing Kit
• Rear Hand Grip Mounting, Device Hose Reel, Solenoid Valve
• Attachment Hose Adaptation (Carriage) and (Upright)
• Quick Disconnect for Device Hose Adaptation
• High Termination Plumbing, Auxiliary Valve Lines, Hose Adaptation
• Fork Positioner, Fork Positioner (Basic), F/P Sideshift Cylinder
• Side Shift Assembly, Sideshift Cylinder
• Block Heater GP, Speed Limit Installation, Fork
• Lift Cylinder Assembly, Secondary Cylinder Assembly
• Standard Upright, Triple Stage Upright, Primary Cylinder Assembly
• Extension Fork, Variable Relief Valve Installation
• Device Hydraulic Pressure Gauge Installation
• Seat Operated Brake Switch, Seat Operated Brake

What you get in this parts manual is the full illustrated breakdown of the CLARK C20 C25 C30 C33(35) L truck. Every group is drawn as an exploded illustration with balloon or item numbers keyed to a matching parts list that gives the reference number, the CLARK part description and the group the item belongs to. That structure makes it possible to identify a single fastener, seal, gasket, hose, fitting, lever, roller or complete sub-assembly without dismantling the machine to guess at what is fitted.

What This Parts Manual Lets You Do

The engine section covers the production engine assembly, engine mounting, front vibration dampener, flywheel mounting adaptor and housing fasteners, plus the full gasket kit, cylinder head and covers, crankcase internals, camshaft timing components, valves, springs, guides, seats and oil pump drive parts. Cooling is broken down across the radiator, shroud, fan blade, compensation tank, hoses and the water pump assembly with its pulley, thermostat, bypass line and idler.

The LPG and fuel side is well represented: tank mounting, swing-down brackets, quick disconnects, three-way adaptors, lock-off valve, vapouriser / regulator assembly, fuel filter, injectors, injector lines, throttle body, ECU mounting and the LPG pressure switch. Exhaust and intake manifolds, heat shields, oxygen sensor and MAP sensor are all catalogued with their fasteners and gaskets.

Driveline content includes the transmission pump and hydraulic group, converter housing and pump drive, converter housing and clutch assembly, transaxle assembly, transmission case and differential assembly, transmission clutch pack, control cover and valve assembly, transaxle mounting and transmission cooling lines. The control cover section alone lists inching spool, modulating valve body, pressure regulating valve springs, accumulator pistons and the full seal and gasket kit references.

Brake and wheel coverage includes the brake assembly with backing plates, wheel cylinders, shoe and lining sets, adjusters, parking brake linkage and cables, plus drive wheel and tire mounting, solid type and pneumatic type options, dual and wide mounting, steer wheel and tire, fenders and offset spacers. The steering and hydraulic chapters list the steer column and gear mounting, steering unit, steering wheel mounting, hydraulic steering lines, return lines, steer axle mounting, steer cylinder and the complete steer axle assembly with knuckles, bearings, seals and pins.

The hydraulic chapters cover the hydraulic pump, hydraulic tank and components mounting, main control valve in 2, 3 and 4 spool configurations, push button 3-spool and 4-spool valves, lift and tilt sections, spool seal kits, tilt limit with override, hydraulic lift and tilt lines, hydraulic supply lines, tilt cylinder and mounting, tilt amount group, accumulator installation, relief valve assembly and selector solenoid valve.

Carriage and upright coverage includes the load back rest, carriage assembly with outer and inner thrust rollers, captive rollers and shims, upright mounting with trunnion bushings and caps, standard upright, triple stage upright, primary and secondary lift cylinder assemblies, lift chains, chain sheaves and anchors, extension forks and the fork positioner / sideshift attachments with their cylinders, lines and fittings.

Electrical and operator environment coverage lists the electrical control, alternator assembly and its internal parts, battery mounting and cables, key and directional switch installation, head lamp, rear work light, combination lamp, LED lights, strobe light and mounting, back-up alarm, rear accessory mounting, static electricity discharger, instrument and main wiring, LPS construction, seat operated brake, cab electrical components, noise reduction installation, seat assemblies including suspension type, floor plate and cowl mounting, cab mounting, heater installation, storage console, decals and truck fluids.

Attachment plumbing is covered in depth with device hose reel, solenoid valves, attachment hose adaptation for carriage and upright, quick disconnects, high termination plumbing and auxiliary valve lines, plus the variable relief valve installation and device hydraulic pressure gauge installation.

Why a Factory Parts Breakdown Matters

Forklift parts are not interchangeable by sight. A seal, fitting, roller or hose that looks correct can be the wrong specification for a given build. Because CLARK ties the catalogue to a serial number format, ordering against the wrong group can leave you with a component that fits physically but fails in service. Working from the illustrated group drawings lets you confirm the exact item number, see what it attaches to, and check the surrounding fasteners, shims, seals and retainers that should be replaced at the same time. On assemblies like the brake, clutch pack, control valve and upright, that surrounding hardware is exactly where a rebuild succeeds or fails.

For anyone maintaining a fleet of C 20/25/30/33(35) L trucks, having every group in one document also means faster parts identification at the counter, fewer wrong orders, and the ability to hand a technician a single page showing the complete exploded view of the group in question.

IMAGES PREVIEW

Instant PDF Delivery

The manual is delivered as an instant PDF download — no shipping, no waiting for a disc or a printed binder. Open it on a laptop, tablet or phone in the workshop, zoom into the exploded views, and print only the pages you need for the job in front of you. Once downloaded it stays on your device, so the parts breakdown for your CLARK C20 C25 C30 C33(35) L forklift is available whenever a component needs to be identified or ordered.