Dynapac SD2500C V5100TVE Paver Spare Parts Catalogue PDF – 901 Page Parts Manual

Description

Dynapac SD2500C and V5100TVE Spare Parts Catalogue

This is the complete parts catalogue for the Dynapac SD2500C and V5100TVE tracked pavers, published under document number 4700777486 with the header SD2500C s/n MG004063 – V5100TVE s/n 3104079. At 901 pages, it is the full illustrated spare parts list covering every assembly on the machine from the auger and conveyor through to the engine, hydraulic system, electrical harnesses, operator platform, and all factory options.

Every section is presented as an exploded isometric drawing with item numbers keyed to a table listing the exact part number, description, quantity, and where applicable the serial-number break. This is the document a parts counter or workshop uses to identify and order the correct component for a specific machine build.

File Details

• Manual type: Spare Parts Catalogue / Illustrated Parts List
• Brand: Dynapac (Dynapac GmbH)
• Models covered: SD2500C, V5100TVE
• Serial number range: SD2500C s/n MG004063 – V5100TVE s/n 3104079
• Document number: 4700777486
• Date: 2022-05-19
• Language: English
• Page count: 901
• File format: PDF

What This SD2500C V5100TVE Parts Catalogue Covers

The catalogue is organised into the same groups the machine is built from. The list below shows the main divisions and the second-level assemblies underneath them.

• Auger kits — wear part kit auger wings Ø380mm, renewal kit I auger drive (valid from 0G001393), renewal kit II auger drive
• Hopper / pushroller kits — wear part kit hopper rubber front hopper flap, wear part kit hopper rubber standard, renewal kit push roller
• Conveyor kits — wear part kit conveyor guide plates (standard and Hardox 400), wear part kit conveyor plates (standard and Hardox 400), reversing roller, conveyor chain single and double bars, chain guide, conveyor drive, conveyor sprocket, complete conveyor drive, guide-and-plate kits
• Drive kits — wear part kit rubber plates, track roller, idler, drive sprocket, slide parts kit
• Service kits — 500 h, 500 h Plus TIER 3, 1000 h TIER 3, 1000 h Plus TIER 3, filter kit 1000h
• Lubricants — lubricants and operating substances
• General kits — fuse and relay kit, plug kits
• Main frame and chassis — main frame, steering guide, side arm guiding, splash guard, extension, levelling arms (electrically locked, left hand, right hand), adjusting screw, locking electric, push roller hydraulic crosshead, push roller, pillow block, hopper with dump plate, hopper left and right, bulk material flap
• Covering and isolation — bulk head, hood supports, intermediate sections, air guides (left, right, rear), support plates, retainers, covers, doors, iso-hoods, hoods, covering centre parts, disc frames, isolation, retainer left and right
• Operator platform — moveable platform with weather roof, base plate, crash protection (left, right, front), roof frame front, umbrella roof, locking, fold-away steps, sheet tub, door, guide platform, guide tubes, guide profiles, security rail, hydraulic operation platform, control blocks, linear actuators, retainer, electric roof, operator board, clamping lever, telescopic pipe set, console, stop bolt, covers, harness W14 platform
• Ascent — ascent for Vario screed, ascent middle, ascent left hand, ascent right hand
• Engine Stage IIIA / Tier 3 — drive TIER 3, engine, combined cooler / air filter, combined cooler, expansion tank, fuel tank, attaching parts, muffler, fuel system, engine support, end pipe / rotary feedthrough, joint rod, oil drain, harness W12
• Service parts — split gear, engine clutch, gear oil drain, pump distributor gear, pumps, track group, track group short right and left, pressure gauge kit, track roller big and small, track drive, drive gear box, replacement kits, track chain, track group support
• Conveyor — conveyor single no. of bars rev., conveyor drive, conveyor motor reversible, hydraulic conveyor reversible, directional spool valve, conveyor turn, tensioner, conveyor limit switch SPS complete, left hand and right hand
• Auger — auger Ø380mm 2.50m, auger basic width 380, auger box, outer support, auger support, wear part kit auger wings Ø380mm, renewal kits, mounting parts, auger gear, material tunnel installation kit Ø380 / 160mm, material tunnel 230mm, worm extension left and right, auger Ø380mm 4.42m, extension part, auger extension left and right L:320mm, material tunnel L:320mm and L:640mm, auger shaft extension assy 640mm, end support complete, screw conveyor end bearing
• Hydraulic system — hydraulic drive system, pumps, brakevalve, hydraulic auger, hydraulic conveyor, flow control valve, connecting plates, hydraulic tamper/vibration, work hydraulic, control blocks, replacement kits, cables, filters, montage kits, hydraulic fan, hydraulic tank collector, hydraulic tank complete, return suction filter, ganged valve support, levelling cylinders, hose packets (interface, screed movement, tamper vibration, profile adjustment, endplate, screed THE)
• Electric system — electric distribution, junction boxes, mainboards, cables W2.1, W3, W4, W5, W6, W9, W10, ground strap, W80, W81, W82, harnesses W15, W16, W2.2, W19, W17, W14 platform, W23, W65, W21, W51, W52, W70, W71, W62, W69, W67, harness W12, W95 roof
• Steering unit — steering unit assembly
• Control system — control system components
• Remote control DYNAPAC — remote control, housing, vandalism protection tracked
• Options — generator set 25/35 KVA, el. heating, control box, vandalism protection, universal joint protection, spot lights, rotating lights, slip-on pipe, holder, back-up alarm, hydraulic auger lift, without fume absorbing system, cover, maintenance lid, central lubrication, pumps, kit central lubrication for auger, electrical central lubrication, Gloria spraying device, driver’s seats, track cleaner, locking lever, indicator thickness bottom and top, pointer, bottle holder, tools and accessories, tar spattle, CAN-sensor kit 2+1 red, USB technical documentation, TruckAssist brief instruction, fume control system, exhaust fan, hydraulic fume control, pressure reduction valve, box remote control PLC, indicator thickness top, driver’s seat, electric seat heater, hydraulic auger lift SETASSIST, oil dipstick side door, material chute, bio hydraulic oil, hydraulic partial flow filter, track cleaner complete and electric, electric cylinder, cable W93, material tunnel installation kit, protection cover, spot light for auger, engine room lighting, electric engine room lighting, cables W96, W98, W99, shining balloon, retainer, swinging arm, Light Assist, fire extinguisher, diesel pump, refuelling equipment, sprayer 25L hose package, emulsion tank, hose package, spray arm, electric emulsion spray, cable W36, sprayer 25L hose reel, hose reel, emergency stop, mounting parts, spiral cable, bucket, door, stripper, exhaust system, sensor holder, support holder, rubber covering, connecting plate, decals, socket 230V, 12V installation, cool box, electric cool box, cable W77, first-aid kit, auxiliary weight, profile adjustment hydraulic, control block, camera system, retainer, electrical camera system, mounting parts, steering control 10m, retainer, steering sensor, cable W21, TruckAssist Advanced, housing, el. TruckAssist Advanced, cable W67, kit mat-manager, generator set 25 KVA, el. heating, control box, vandalism protection, universal joint protection, cover, gravel field kit, conveyor chain, gusset plate, bulk material flap, oil drain hydraulic tank, tropical kit, door left hand, support rod, insulating board, diesel cooler complete and bare, door right hand, support rod, engine clutch, hood support, intermediate section, air guides, hoods, covering parts, GPS installation advanced, GPS installation pro, DynaLink Pro, Hardlock Advanced, temperature sensor, temperature sensor Moba, hydraulic side shield, control blocks, additional storage boxes, MatTracker Sensor, harness W25.2, retainer, hydraulic side shield Stage V, control block, levelling PLC, CAN-sensor kit 1+1 red, Big Ski 13m PLC red, electro installation Big Ski, Big Ski 13m complete, side arm support, Big Ski 9m PLC red, Big Ski 9m complete, Big Ski 13m + add on kit red, electric parts Big Ski, Big Ski 9m + add on kit red, add-on kit red, trailing ski 9m, trailing ski 6m, mounting parts, wire tensioner complete, ultrasonic sensor, sensor, Digitorary Kit, accessories, spare key, tools and accessories, decals, symbols, special colours, stickers, special tools
• Schematics — hydraulic paver 467, electric paver 810

Beyond the itemised lists, this SD2500C V5100TVE parts catalogue gives you the full exploded-view illustration set for every one of the assemblies above. Every drawing is an isometric rendering with numbered callouts that link straight into the adjacent parts table, so you can trace a component back to its exact part number without guessing. Serial-number notes appear where Dynapac changed a component mid-production — for example the auger drive renewal kit is marked as valid from 0G001393, and several hydraulic and electrical items carry “Valid for s/n” or “Valid from s/n” annotations. That means the catalogue is not just a flat list; it tells you which version of a part belongs to which machine build.

For anyone maintaining or repairing a Dynapac SD2500C or V5100TVE, the value is in having the complete parts breakdown in one place. Whether you are ordering a single wear part, rebuilding an auger drive, chasing a hydraulic hose by its part number, replacing a track roller, or working through the electrical harnesses to identify a connector or cable, the catalogue provides the identification layer that sits between the machine and the parts counter. The exploded views also make it possible to see how an assembly goes together and comes apart before any spanner is laid on the machine.

Why This Parts Catalogue Matters

Ordering the wrong part costs time, money, and machine availability. This catalogue eliminates guesswork by giving you the exact Dynapac part number for every component on the SD2500C and V5100TVE, together with the quantity required and any serial-number applicability. For a machine as complex as a tracked paver — with its separate auger, conveyor, tamper, screed, track drive, and hydraulic circuits — that level of identification is essential whether you are a workshop technician, a fleet maintenance planner, or an owner-operator keeping a machine running.

The document also covers the optional equipment and accessory ranges, so if your machine is fitted with generator sets, central lubrication, fume control, camera systems, GPS, TruckAssist, MatTracker, or any of the other factory options, the parts for those systems are included in the same catalogue.

IMAGES PREVIEW

Instant PDF Delivery

The Dynapac SD2500C V5100TVE spare parts catalogue is delivered as an instant PDF download. There is no shipping, no waiting for a physical book, and no restriction on where you open it. The file can be viewed on a workshop PC, a laptop, a tablet, or a phone, and any page or section can be printed for use at the machine or at the parts desk. Once downloaded, it is yours to keep and refer to whenever a part needs identifying or ordering for the SD2500C s/n MG004063 to V5100TVE s/n 3104079 range.