Epiroc Pit Viper PV351D Spare Parts Catalog 0000080218-001

Description

Epiroc Pit Viper PV351D Spare Parts Catalog 0000080218-001

This is the full illustrated spare parts catalog for the Epiroc Pit Viper PV351D surface drill rig, released under document number 0000080218-001. It is a parts-identification reference rather than a service manual: every assembly is presented as an exploded isometric drawing with ballooned item numbers keyed to a parts table listing part number, description, quantity, remarks and, where applicable, remanufactured part numbers. The catalog is organised by machine system so a specific component — a jack cylinder, a hydraulic pump section, a cab door latch, a track roller — can be found quickly and ordered against the correct number.

File Details

• Document type: Illustrated spare parts catalog
• Brand: Epiroc
• Machine: Pit Viper PV351D
• Document number: 0000080218-001
• Language: English
• Page count: 975
• File format: PDF

Chapters Covered

• PM Kits — 250HR, 500HR, 1000HR, 2000HR, 5000HR
• Mainframe Assembly — mainframe, jack assembly CS, rear jack installation, jack assembly NCS, mainframe fab
• Drill, Angle, RCS — support tower, strut support tower, electric angle RCS, RH mount holder, auto tower angle
• Support, Structure
• Decking Assembly — deck and rail, decking wraparound, decking front, decking CS
• Stair, Standard DCS — stair DCS, lower stair kit
• No Spring Ladder — decking non dust CR
• Stair, Hydraulic, CS — hydraulic ladder, hydraulic stair, power unit, ramp control box, ramp cylinder, limit switch, front mount box switch
• Undercarriage — tracks PPR2, undercarriage PPR2, sprocket group, roller assembly custom 375, roller group, track group PPR2 650MM, guard group, idler group RH/LH/front, cylinder group, mechanical part group misc, frame group undercarriage, drive motor track, final drive gearbox
• Tram Speed Control
• Cab Kit — cab with AC STD RCS5, cab electric, cab with standard glass, cabin complete, wire harness kit, operator unit, operator seat, chair RCS4, suspension seat, ADS sit left/right, panels and panel holders
• Joystick mini C15
• Rear door assembly, right door assembly, electrical cabinet, RH/LH cabinet doors, cabinet shelf, storage compartment and lid, headliner, buddy seat, overhead storage console, roof wrappers, main electric cabin panel
• Terminal sets — cab top/bottom horizontal, power distribution, cab power distribution
• Network switch — electronic 12 port with routing
• Head liner, sound proof panels, A/C plenum, fluid system, washer filler, inspection cover, glass retainer mounting kit
• Air conditioner
• USB stick RCS5, cab heating installation, piping cab heater CAT
• Seat interlock, inclinometer assembly, cab window kit, stereo, mirror installation
• Tower — carriage travelling CS, carriage sheave DS, auxiliary cylinder, sheave pullback, sheave pulldown, tray installation, sheave pullback Aquila encoder sprocket, feed cylinder, tower decking, hydraulic motor, screw jack, cable cylinder, winch
• Tower Vertical Locking — yellow
• Curtains, Dust
• Power Pack — hydraulic motor, control 2A assembly, servo output, motor control valve
• Piping, Tower Hydraulic — feed control valve, dual sequence valve, hose carrier, hydraulic manifolds, 2-way NC cartridge valve
• Carousel 10.75 8 BECO, lower rod catch, spindle 10-3/4 x 59
• Breakout Wrench 10-3/4″ — breakout wrench 10.75+12, hydraulic hose set
• Access, Tower — fall restraint
• Engine/Mount Assembly — engine CAT3512 Tier 1
• Base, Powerpack
• Exhaust/Piping
• Cooler Assembly COC/HOC — cooler, hydraulic motor, fan manifold valve
• Piping, Radiator
• Battery, Start, Isolation — battery box assembly
• Crank case vent hose
• Air Cleaners — air cleaner, air cleaner piping
• Fuel System — fuel tank Wiggins JNX, 600 gal fuel tank, fuel piping engine
• Air System — airend/mounting assembly, rebuild kit, airend repair kit, pump
• Tank Receiver, Diesel
• Plumbing, Compressor
• Compressor Controller EARS RCS5 — actuator, interface board, temperature sensor
• Kit, Filter 2x28MM
• Piping, Air Tower Support
• Deck — cooler deck skirt
• Hydraulic Set — pump hydraulic P14 9A, pump P7 9A, double pumps, 2-way NO solenoid valve, sequence valve, slow acting relief valve
• Piping, Main Hydraulic — valve module, VP7 valve, VPL6 valve, VPL9 valve, diverter assembly, counter balance valve, filter assembly, return/drain manifold, supply/suction manifold 130, tower raise cylinder
• Tank, Hydraulic
• Drain line — hydraulic filter
• Pump Drive Installation — gearbox 60 Hz, pump drive 1:1.18 ratio, filter assembly
• Piping, Strut
• Piping, Angle Pin
• Rot w/o Torque Control — DR/PR control valve no torque, DR/PR RCS manifold
• Hydraulic filter drain kit — remote relief valve
• Wiring, Engine
• Electrical, Mainframe, RCS5 — valve table electric RCS5, cable kit, power frame, electrical power pack installation, electric box 3 RCS4, light assembly, box 1/2/4, cable routing jack sensor, hoist box, remote control, E-stop front mount and assembly, light pole, horn assembly
• RRC Assembly, RCS5 — operator unit ADS miniOU Mark2, spare structure, cover lock complete, circuit board complete MED display + radio, front head comp, electronic unit RCS RRC MU safe
• Electr. System Tower RCS — cable set RCS, harness RCS5, electric box, box 7 RCS, mount encoder
• Options — hydraulic shut-off switch, ground access light, autolevel assembly, autolevel box, auto drill next gen, mechanical S/O grease system (Graco auto fill/shutoff, grease pump manifold), piping grease sections (strut tower, pivot block, rod support, rod changer, angle drill, dust curtain, yoke), water injector 900 gal diesel (pump assembly, injection pump, 900 gal water tank), fast service GLI, nozzle kit diesel, washdown system, oil evacuation and sampling, drain panel, sampling panel, viewer remote desktop RCS5, tele remote kit, safety system safety slave unit, camera 118IR, electronic unit video server, bit view door assembly, hatch door assembly, injection bit lube DTH, DHD lubricator 60 gallon, DHD lubricator pump, DHD lube tank, tools and accessories, nameplates, decals RCS4 Spanish, commission/service kit RCS, blow gun with 25 ft hose, hydraulic O-ring kit, tower support

Because the PV351D is built from a large number of sub-assemblies that share components with other Pit Viper variants, the catalog is arranged system-by-system rather than by part number. Each section opens with an overview illustration of the assembly in place on the rig, followed by detail views that zoom in on the individual components. Part numbers appear in the same table row as the ballooned reference, alongside the quantity required per assembly and any remanufactured alternative — so a rebuild, a reseal, or a single failed hose can all be ordered from the same drawing.

How This Catalog Supports Parts Identification

Working from an exploded parts catalog changes how a parts issue is resolved. Instead of describing a component over the phone or trying to match a photograph, the technician locates the drawing, reads the ballooned item number and looks up the exact part number, quantity and remanufactured option in the adjacent table. The Pit Viper PV351D spare parts catalog covers the complete machine, so a single lookup covers the drill string, the tower hydraulics, the tram system and the cab. The PM kit sections are especially useful because the 250HR, 500HR, 1000HR, 2000HR and 5000HR kits are presented as complete assemblies, letting the maintenance planner order a whole service bundle rather than chase individual filters, seals and elements.

IMAGES PREVIEW

What You Can Do With It

• Identify the correct part number for any ballooned component in the PV351D assembly drawings.
• Confirm quantities and check whether a remanufactured part option exists.
• Build a complete parts list from an exploded view before stripping a system.
• Cross-check PM kit contents for the 250, 500, 1000, 2000 and 5000 hour service intervals.
• Trace hydraulic hose and tube routing through the tower, mainframe and powerpack piping sections.
• Find electrical box, harness, cable and sensor part numbers for the RCS5 control system.
• Order breakout wrench, carousel, rod changer and DTH lubrication system spares against the correct number.

Why the Correct Part Number Matters

On a machine of this size a mis-ordered hydraulic fitting or an incorrect seal can mean an unplanned shutdown while the correct item is re-sourced. Using the illustrated catalog removes guesswork: the exploded drawing shows exactly where a part sits and which assembly it belongs to, while the parts table ties it to a specific number. The inclusion of remanufactured options also lets a maintenance budget go further on major items such as cylinders, pumps and the air end, where the catalog lists both the new and reman part numbers side by side.

How the File Is Delivered

The Epiroc Pit Viper PV351D spare parts catalog is supplied as an instant-download PDF. There is no shipping and nothing to wait for — the file is available immediately after checkout and can be opened on a laptop, tablet or phone in the workshop, printed for a binder, or stored on a maintenance server for the whole team. At 975 pages the PDF is large enough to hold the complete exploded-view coverage of the rig, yet it travels as a single file, so a technician can search a section index, jump to a system and read off part numbers without an internet connection on site.

Buying the Epiroc Pit Viper PV351D Spare Parts Catalog

Whether you are ordering consumables for a scheduled service, rebuilding a failed jack or tracking down an obscure sensor for an RCS5-controlled rig, the illustrated parts catalog for the Epiroc Pit Viper PV351D gives you the part numbers, drawings and quantities in one place. It is the reference to keep beside the workshop manual, and the fastest way to turn a failed component into a correct replacement order.