Yanmar Vio35-5 Crawler Backhoe Parts Catalog PDF – 0CS10-M48401EN (US, Australia, NZ & Singapore)

Description

File Details

• Manual type: Parts Catalog
• Brand: Yanmar
• Model: Vio35-5 crawler back-hoe
• Document number: 0CS10-M48401EN
• Edition: 1st edition, Sep. 2006; 1st revised, Dec. 2007
• Language: English
• Page count: 153 pages
• File format: PDF

What This Yanmar Vio35-5 Parts Catalog Covers

The Yanmar Vio35-5 Crawler Backhoe Parts Catalog PDF – 0CS10-M48401EN is the illustrated parts reference for the Vio35-5 crawler back-hoe as supplied to the United States, Australia, New Zealand and Singapore. It is built around exploded illustrations rather than service procedures, and each drawing is keyed to a numbered parts list giving the part number, description, quantity and the markets the item applies to. Machine coverage begins at vehicle serial 50558 and engine serial V32151, so the catalog suits the 2006/8-onward build of this machine fitted with the 3TNV88-QB engine.

Because the same catalog serves four destinations, the parts lists carry separate quantity columns for the US, AS (Australia), NZ and SG (Singapore) variants. Items that change by market, by machine serial or by specification are flagged directly in the tables, which makes this a practical reference for anyone ordering parts for a specific unit rather than a generic one.

Chapters Covered

• Label & Accessory — label (cabin), label (canopy), safety label (cabin), safety label (canopy), repair parts
• Engine Related — muffler & air cleaner, accelerator, engine mount, radiator shroud, radiator & sub-tank, duct, fuel tank, fuel line
• Electrical Parts — battery, electric parts around engine, frame, starting switch, seat, travel alarm and work lamp, quick coupler switch box
• Air Conditioner & Heater — heater, air conditioner electric parts, engine-related, condenser-related, cabin-related and piping
• Traveling — sprocket & roller, track roller (K spec.), idler & adjust, crawler
• Control Equipment — lock lever & stand (right and left), travel lever, blade lever, swing pedal, low-high pedal, P.T.O. pedal, arm rest, control valve plate, cover for the P.T.O. switch link
• Frame — turning frame, track frame & turning bearing
• Cover — cover (frame), cover (bonnet)
• Around Seat — step & floor mat, instrument panel, seat mount, seat & handrail
• Bonnet — bonnet (1) and bonnet (2)
• Cabin — window washer, cabin body, cabin glass, cabin accessory, cabin electric part, front and rear cabin doors, cabin cover, cabin fitting, rearview mirror
• Canopy
• Hydraulic Oil Equipment — hydraulic oil pump & joint, boom cylinder, arm cylinder, bucket cylinder (Y and K spec.), swing cylinder, blade cylinder, hitch cylinder (quick coupler), travel motor, turning motor, swivel joint, control valve sections for SG and for US/AS/NZ, remote control valve, 2-way multi lever, 4-way multi lever
• Hydraulic Oil Piping — greasing, hydraulic oil tank, and the full piping series from tank-to-pump through to the quick coupler circuit, accumulator and control piping
• Optional & Kit — holding valve kits 1 through 5 and the Canadian franchise label
• Implement — boom bracket, arm, bucket arm & link, bucket

Between them, these groups take the machine apart from the paint and decal scheme down to individual seals, O-rings, bushes, pins and shims. The hydraulic section is unusually deep for a parts book: the control valve alone is broken into seven separate figures for each of the two market groups, so each spool, relief valve, cover, plug and O-ring can be identified on its own drawing instead of being buried in one undifferentiated block.

How the Catalog Is Organized

Every figure opens with an illustration page carrying balloon numbers that correspond to a parts list on the facing page. Each line in that list gives the item number, level, part number, description, the quantity required per market column, and interchangeability or change markings. Where a part has been superseded, the list flags it with an N, Q, R, W, Z or K code so you can see at a glance whether a number is old, new, discontinued, added, or interchangeable only as a set.

Front matter includes a painted colour chart with Munsell numbers and paint part numbers for 16L can and 4L can containers and spray, plus a three-page pictorial index that maps every figure number to its position on the machine and its location in the hydraulic circuit. That index is the fastest way to move from a component on the machine to the correct figure in the book.

Market and Specification Coverage

The catalog is written for four destination codes: Vio35-5 (US), Vio35-5 (AS) for Australia, Vio35-5 (NZ) for New Zealand and Vio35-5 (SG) for Singapore. Separate control valve figure sets exist for the SG group and the US/AS/NZ group, and the bucket cylinder is listed in both Y specification and K specification versions with a note that the inner components are not interchangeable between them. Rubber crawler and iron crawler specifications are also treated separately in the undercarriage and idler sections, with a dimensional difference called out between the two.

Why This Parts Catalog Is Worth Having

Ordering the wrong part on a compact excavator usually means a return, a delay and a machine sitting idle. This catalog removes the guesswork: you match the figure to the component, read the balloon number, and get the exact part number with the correct quantity for your machine’s destination code. Cylinder rebuild work benefits in particular, because each cylinder figure lists its seal set, head assembly, piston, bush, cushion collar and dust seal as separate identifiable items rather than a single opaque assembly.

It also documents the optional holding valve kits and the quick coupler hydraulic circuit, which are frequently retrofitted and rarely documented once a machine has changed hands. If you maintain, repair or rebuild a Vio35-5, having the parts breakdown alongside your service information makes every job faster and every order more accurate.

Delivery

IMAGES PREVIEW

The Yanmar Vio35-5 parts catalog is delivered as an instant PDF download. There is no shipping, no waiting and no physical book to store. The file opens on any device, and any figure or parts list can be printed for use in the workshop or passed to a parts counter.