Epiroc Scooptram ST1030 Spare Parts Catalog 8997759800-001 – Underground Loader Parts Manual PDF

Description

The Epiroc Scooptram ST1030 is a hard-rock underground loader built for continuous production in narrow-vein and development headings, and keeping one running means knowing exactly which seal, hose, bearing or wear part belongs in every assembly. This Epiroc Scooptram ST1030 Spare Parts Catalog 8997759800-001 is the illustrated parts reference for the machine, covering the full scope of its major assemblies and sub-systems with itemised part numbers, quantities and exploded views. Every page is organised the way the machine itself is built, so a part can be found by walking the assembly tree rather than guessing at a name.

File Details

• Manual type: Spare parts catalog
• Brand: Epiroc
• Model: Scooptram ST1030
• Document number: 8997759800-001
• Engine covered: Cummins QSL9 250HP
• Language: English
• File format: PDF
• Page count: approx. 822 pages

Chapters Covered

The catalog is grouped the same way the ST1030 is assembled, and includes the following top-level sections:

• PM-Kits – 250H, 500H, 750H, 1000H
• Filter set – primary & safety air filter
• Maintenance – engine hours FFM
• Mainframe – loadframe, bogie assembly ST1020
• Boom compl. – boom assembly, boom weldment, boom attachment centre, anchor, Z-bar
• Boom lock – boom up lock installation, locking pin safety device
• Bucket – 2.0 T/M3, bucket attachment assy G3, trunnion cap, clamps, wear bar kit, knife/cutting edge
• Pin bucket – pin set for BKT G3
• Powerframe – configured powerframe
• Fuel tank – tank installation, fuel tank, Wiggins installation
• Hydroil tank – tank, return filter, breather filter, gas valve with cap, swivel lock, sight glass
• Fender – powerframe fender installation, powerframe parts
• Attachment – steering anchor
• Engine hoods, hood, hand railing
• Cabin – cabin installation, cabin, door, drivers chair/seat, step assy, wheel chocks
• AC complete – air conditioning detail, hose set, AC evaporator module, Red Dot 24V evaporator, electric set, cable sets, pressurizer installation and assembly
• Dogbone assy – G3, dogbone, swivel installation
• Power unit engine installation – Cummins QSL9 250HP
• Engine assy – engine cradle Cummins QSL9, diesel engine, sensors
• Fan hub, hose sets, bearing unit
• Exhaust system – exhaust bend, silencer, purifier, heat shields
• Filter group – fuel system, fuel filter with heater
• Cooling system – plmg. engine cooling Cummins QSL9, hose list
• Radiator assy. – radiator installation Cummins QCL, surge tank, installation kit, holder
• Powertrain – Kessler front axle installation, Kessler rear axle installation, hyd. front/rear axle
• Bear & seal kits – differential kit, brake kit, planetary kit, oscillation bearing repair set
• Control system – control brake pedal, valve set, rev modulation brake valve
• Driveline – complete driveline, 8.5C and 6C driveline, cardan protection guard
• Upbox – Upbox ST1020 Cummins QSL9, Upbox mod, Upbox 16″, drop box
• Hydr. transmission – converter
• Brake system – diagram, hose sets, brake valve set, brake release valve, auxiliary valve, hand pump, brake cooling manifold, accumulator, gauge and measure panel, high pressure filter
• Towing system – tow hook diagram, hose set, hydraulic cylinder, valve set, valve block, accumulator
• Fan with motor – fan box assembly, fan plate, cast iron gear motor 21.1cc
• Radiator unit – cooler assy, aux cooler hood, trans/hydr cooler
• Transmission – DF250 overhaul kit, bearing service kit, seal & gasket kit, front cover group, midship mount group, converter, gear ratio group, clutch assemblies, output stage, main case, valve, yoke group, first stage cover, pump
• Wheel installation – Michelin 18.00R25 XSM D2+PRO, wheel compl., rim
• Hydr system – dump and hoist handle, mono stick steering control, hoist cylinders, stab cylinder, steering cylinder installation, dump & hoist installation, priority valve, flow control assy, J-block & door, main control valve
• Steering system – hydraulic steering diagram, gear pump, valve set
• Hyd. fill pump, Wiggins hydraulic fill
• Ride control system – hose set, cable set, accumulator
• Electrical system – E10 cabin, E20 canopy, E30 powerframe/loadframe, A10 panel, A11 switch panel, wiring, USB cable, display panel, accel pedal, pedal electronic with idle switch, cable sets W11/W13/W14/C11/C22/C30/C31, emergency pushbutton, fuse holder, reverse alarm, flash light, electric boxes A20/A22/A30
• Light set – LED lights, headlight cabin, headlights, flood headlight, loadframe headlight set
• Alternator – 24V/140A
• Battery installation, battery support, rubber latch
• CD player
• Flash light – amber strobe ignition-on, strobe amber, blue strobe
• Remote system – wireless bridge installation
• Light set – red and green lights, powerframe and loadframe assembly sets
• Jump start connection, ISO switch, main power switch
• Camera – rear camera option, cab module, powerframe module
• Fire suppression system – CheckFire with kill, CheckFire cab/canopy, powerframe, loadframe module, AnsuL extinguisher and bracket LTA101-30, pressure switch, hose and cable sets
• Lubrication system – autolube, powerframe and loadframe modules, grease pump 2 litre RV 350 bar, lube bulkhead set
• Label set – warning signs, cabin module, loadframe, powerframe

That contents list is only the surface. Once you open the file, each top-level section breaks down further into full assembly diagrams with every component called out by item number, part number, name, quantity and where relevant a remark such as torque class, thread size or kit inclusion. Sub-assemblies that are sold as complete kits (PM kits, seal kits, bearing kits, overhaul kits) are shown with the kit part number and the individual items that make them up. The PM section alone covers four service intervals – 250H, 500H, 750H and 1000H – plus a 1000H total, so a maintenance planner can price a full service cycle from one document. Hydraulic hose sets and cable sets are listed separately by assembly, which is exactly what a workshop needs when a single line fails underground.

What This Parts Catalog Covers on the ST1030

The Scooptram ST1030 is powered by a Cummins QSL9 rated at 250HP in this configuration, and the catalog dedicates a full engine installation section to that power unit – covering the engine cradle, the diesel engine assembly itself, sensors, the fan hub and the bearing unit. The powertrain chapter then follows the drive path through the Kessler front and rear axles, the DF250 transmission with its overhaul, bearing and seal & gasket kits, and the 8.5C and 6C drivelines. Because axles, brakes and planetaries are broken into individual kits (differential, brake, planetary, oscillation bearing), you can order the exact rebuild set you need without buying the whole axle.

Hydraulics get equally deep treatment: hoist cylinders, stab cylinder, steering cylinders, dump and hoist handle, mono-stick steering control, priority valve, flow control, J-block and door, main control valve, brake cooling manifold, accumulators, ride control and the hydraulic fill pump with its own electrical box and cable set. Every valve set names the cartridges, seal kits and coil part numbers inside it, so a valve repair does not require a second lookup.

The electrical side is covered module by module: E10 cabin, E20 canopy, E30 powerframe/loadframe, the A10 panel and A11 switch panel, A20 and A22 electric boxes, all the numbered cable sets (W11, W13, W14, C11, C22, C30, C31 and more), plus lighting, alternator, battery installation, jump start connection, main power switch and the rear camera option. Optional systems such as fire suppression (CheckFire and AnsuL) and the automatic lubrication system have their own dedicated chapters with the full component tree.

Because this is a genuine Epiroc catalog released under document number 8997759800-001, the part numbers and item call-outs match the machine’s build rather than a generic aftermarket list. That matters when the loader is underground and a wrong seal or hose fitting costs a shift.

How to Use It in the Workshop

Each diagram is exploded, so the fastest route to a part is to find the correct assembly diagram, read the item call-out number off the drawing, then cross it to the parts table on the same spread. The table gives you part number, description, quantity per assembly and any relevant note – meaning you can quote, order and stock directly from the page. Multi-page sections are sequential, so bearing and seal kit pages sit directly beside the assembly they belong to. The result is a document you can hand to a parts counter or a storeman and get the right box back.

Why This Catalog Is Worth Having on Hand

• Order the right part the first time – no return shipping on wrong seals, hoses or bearings.
• Price a full PM service from the 250H, 500H, 750H and 1000H kit pages in one pass.
• Rebuild axles, brakes and planetaries using the correct kit part numbers instead of guessing assemblies.
• Trace hydraulic and electrical lines by assembly, so a mid-shift fault can be diagnosed against the same diagram the factory uses.
• Keep the machine in production longer by planning wear parts (bucket edge, wear bars, trunnion caps, chassis bushings) before they fail.

Whether you run one ST1030 or a fleet in a development heading, this Epiroc Scooptram ST1030 Spare Parts Catalog 8997759800-001 gives you the factory parts breakdown for the entire machine – engine, drivetrain, hydraulics, electrical, cab, cooling, exhaust, fire suppression and lubrication – all in a single document. Instead of chasing individual sections, you get the complete ST1030 parts book that covers everything from the Cummins QSL9 injectors to the cab door latch. It is the reference a workshop, a parts store and a maintenance planner should all be working from.

IMAGES PREVIEW

Delivery is instant. Once payment is complete, the PDF is available to download straight away – no shipping, no waiting on a courier, no physical book to lose. Open it on a laptop in the workshop office, a tablet on the bench, or a phone underground; print whichever diagrams and parts tables you need for the job and keep the rest on file. For an ST1030 owner, this is the practical, searchable-by-section parts reference that keeps the loader moving and the order correct.