Flexi NA2.0 Narrow Aisle Forklift Spare Parts List DEC028-04 2006 PDF

Description

Flexi NA2.0 Spare Parts List — File Details

• Manual Type: Spare Parts List (Parts Catalogue)
• Brand / Publisher: Narrow Aisle Inc. (Flexi)
• Model Series: FLEXINA 2.0 — NA2.0 Series, 2.0 tons
• Language: English
• Page Count: 107
• File Format: PDF
• Publication Number: DEC 028
• Edition: 04
• Publish Date: 2006-02
• Applies To: Machines manufactured after February 2006

Chapters Covered

• A351 Transmission System
• A352 Car Body Fitting System
• A353 Hydraulic System
• A354 Brake System
• A355 Control System
• A356 Mast System
• A357 Accessory System
• A358 Repair Kit System

A351 Transmission System

Opens with the front axle assembly and the axle and transmission assembly, both shown as exploded illustrations. The parts tables list the drive axle, traction motor, wheel hub, bearings, taper roller bearings, oil seals, axle seat, gear casing, differential case, differential gear, input pinion, helical wheels, drive shafts (long and short), spring washers, cap head screws, grease nipples, front counterweight, immobiliser cover, crossbeam, tire and carbon brush with their new and old part numbers, specifications and quantities.

A352 Car Body Fitting System

Covers the chassis kit, seat and covers, overhead guard, battery tray assembly and linkage lever assembly. Contents include the chassis fabrication, quarter ballasts, hydraulic steer motor and bearing housing, parking cables, handbrake cable linkage, brake pipes, floor plates, running boards, rubber hoses, nylon pipes, tilt cylinder manifold, battery plug bracket, battery tank, rear cover, seat pan, gas strut, seat cushions, dampers, overhead guard fabrication, headlight, caution lamp and reverse lamp. The battery tray section supports the domestic, UK and USA model codes.

A353 Hydraulic System

The largest hydraulic chapter. The oil tank module lists the oil tank and lids, gasket, lift pump motor (48V/1.1K), lift pump, steering pump motor (48V/1.2K), steering pump, serrated drive, filter nets, male connectors, cast flanged elbows, three-way pipe and hoses. The spool valve assembly covers the spool valve, mounting bracket, handbrake assembly, flow regulator, hold regulator, micro switch, limit switch, handle 1/2/3, lever knobs and O-rings. The steering column module details the steering wheel, G.E. display unit, upper steering cowl, steering column, steer orbital valve, adaptors, swivel hose brackets, horns, resistor, priority valve and pressure switch.

A354 Brake System

Two sub-systems: the pedal plate module and the rear wheel assembly. The pedal section lists the pedal mounting plate, accelerator pedal unit, brake pedal, brake pedal rubber, brake push rod, brake master cylinder, plain bushes, expansion spring, foot switch deadman, micro switch and bracket cylinder. The rear wheel assembly lists the wheel cylinder, common shoe, L/H and R/H shoes, tension springs, steady spring, adjuster and the rear wheel mounting hardware with the full exploded view.

A355 Control System

Documents the electrical module in G.E. and ZAPI traction variants. Entries include the mounting plate, fuseholder, 100A and 400A fuses, P.M.T. driver, truck management module, reverse horn, LX meter line, 48V plugs (blue/gray/black by region), relay bases, AL frames, terminal stage whole, diode, ZAPI controller kits, power contactors (line, lift, steering, forward/reverse, regen), timer relay, controller, and cable lines 1 through 8. This chapter is essential for anyone tracing control-side part numbers on the Flexi NA2.0.

A356 Mast System

Covers the mast support assembly, mast sub-assemblies (outer, middle and inner) with lengths from 4200 mm through 9000 mm, mast fitting, narrow aisle fork carriage assembly and the narrow aisle hydraulic components for both fixed and third stages. Also included are the slewing ring, tilt cylinder, chains, chain anchor bolts, pulleys, pulley shafts, spacers, bearings, cylinders, distributing block, side shifter and backrest sub-assembly. Hose assemblies and pipe runs for the fixed and third stages are listed with lengths and connector types.

A357 Accessory System

Label chapter listing the warning labels, pedal function decals, hydraulic oil fill point, transmission oil fill point, foot crush-side force label, discriminate label, lifting points, domestic labels, Flexi logo decals and lamp/horn stickers — useful when restoring a truck to original markings.

A358 Repair Kit System

Consolidated repair kit listing for the main cylinder, lift cylinder, tilt cylinder and the side shifter repair kit for the tilt cylinder, each with its new part number and old part number for cross-reference.

How the Parts List Is Organised

Every assembly in this Flexi NA2.0 spare parts list follows the same four-step structure so you can move from a physical part to the correct part number in minutes. First, an illustration index groups the exploded drawings by mechanism code (A351 through A358). Second, each assembly page carries a numbered exploded illustration keyed to item numbers. Third, the facing parts table gives the item number, part name, new part number, old part number, specification, applied date, quantity and applicable model code (K1: NA2.0, K2: Flexi UK, K3: Flexi USA). Fourth, a Parts Index at the back cross-references every listed part number to its page, letting you jump straight to the correct table when you already know the number.

The manual also explains the two lookup directions the parts tables are designed for — searching by part number when you know the name, shape and location, and searching by part name when you already have the number — plus how to read the new/old part number interchange column so superseded numbers are never missed.

Who This Flexi NA2.0 Parts Manual Is For

If you maintain, service or rebuild a Flexi NA2.0 or FLEXINA 2.0 narrow aisle forklift built after February 2006, this is the reference you keep on the workshop tablet. It supports the full range of jobs that normally stall a repair: identifying a broken component on the front axle or transmission, ordering the correct bearing or oil seal for the drive axle, replacing a wheel cylinder or brake shoe on the rear wheel assembly, sourcing the right spool valve O-ring, cross-referencing the older part number when a dealer only stocks the new number, restoring missing warning labels, or replacing a damaged mast chain, pulley or tilt cylinder. It also lets you verify the correct quantity per assembly before you order, which prevents the classic mistake of buying one spring clip when the assembly calls for four.

Because the parts tables list both the new and old part numbers alongside the specification and applied date, this spare parts list is equally useful when you are working from an older paper invoice or a supplier database that still references the superseded numbers. The exploded illustrations sit alongside the tables on the same mechanism, so you can confirm the shape and position of a part before committing to an order.

IMAGES PREVIEW

Instant PDF Delivery — No Shipping, No Waiting

You are buying the Flexi NA2.0 spare parts list as a downloadable PDF. The moment payment clears, the file is available to open on any laptop, desktop, tablet or phone, and you can print whichever assembly pages you need for the job at hand — a single spool valve spread, a full mast fitting chapter, or the entire 107-page parts catalogue for the workshop binder. There is no physical shipment, no customs delay and no out-of-print wait. Keep the PDF on the workshop device and search the Parts Index by number whenever a Flexi NA2.0 rolls in, and you will spend less time chasing part numbers and more time getting the truck back into service.