Hamm HD+ 90-110 H185 Spare Parts Catalog 2025 Illustrated Parts List PDF

Description

Hamm HD+ 90-110 H185 Spare Parts Catalog 2025 Illustrated Parts List PDF

This download is the HAMM spare parts catalogue for the HD+ 90 and HD+ 110 tandem rollers built under series code H185. The document is issued 15/10/2025 by HAMM AG, Postfach 1160, 95633 Tirschenreuth, Germany, and carries the 2025 copyright line throughout. Text runs in German, English, Spanish and French, so part names, group titles and ordering notes can be read in any of those languages. Each illustrated plate shows position numbers that line up with a facing parts list giving HAMM part numbers, validity ranges, quantities and units.

File Details

• Manual type: Spare parts catalogue (Ersatzteilkatalog / Catálogo de repuestos / Liste de pièces de rechange)
• Brand / series: HAMM HD+ 90-110, Baureihe H185
• Languages: German, English, Spanish, French
• Page count: 653
• File format: PDF
• Issue date shown on plates: 15/10/2025
• Publisher: HAMM AG, Tirschenreuth

What the catalogue is for

The Hamm HD+ 90-110 H185 Spare Parts Catalog 2025 Illustrated Parts List PDF is built for parts identification, not for step-by-step repair narrative. You match a worn or missing component on the machine to an exploded drawing, read the position number, then take the HAMM Teile-Nr. / Part No. from the table. Validity columns such as 1-9999, 228-9999, 258-9999, 326-9999, 331-9999 and later ranges tell you which machines a given line item applies to. Quantities and units (almost always PC) sit beside the German, English, Spanish and French designations so a parts clerk can order without guessing the description.

HAMM states at the front that the catalogue contains the full delivery scope for the machine type, so more items may appear on a plate than are fitted on one particular roller. Identification still starts from the serial number on the type plate and chassis. A direction arrow on each Bildtafel / poster marks travel or working direction so left-hand and right-hand parts are not swapped. Cross-references such as group 03.05.01 send you to another plate when a sub-assembly is drawn elsewhere.

How to use the plates and lists

Typical plate headers carry the series code H185, the assembly group number (for example 01.01.01 / 00 or 26.01.11 / 00), an internal drawing number, and the 15/10/2025 date. The facing list columns are Position, Part No., Valid for, Quantity, Unit, then Benennung / Designation / Denominación / Dénomination. Fasteners are listed individually rather than buried inside a kit: hexagon screws, cheese-head screws, countersunk screws, locking washers, safety nuts and cap nuts all receive their own part numbers. Where a plate covers more than one drum layout, a box on the drawing names the layouts, for example 90 VV / 90 VV-HV / 90 VO and 110 VV / 110 VV-HV / 110 VO.

IMAGES PREVIEW

Front-matter pages explain how to place an order: machine type, year of manufacture and serial number; part number and quantity; delivery address and contact; and the required shipment method. HAMM also warns that parts and extra equipment not supplied by the company have not been tested or approved, and that liability is excluded for damage from non-original parts or unauthorised conversions. Those notes sit in German, English, Spanish and French so the same rule is visible no matter which language column you work from.

Chapters Covered

• 01.00.00 / 00 Main frame and assemblies (from page 32) – front and rear frame parts, covering parts, footsteps, mirrors, retaining sheets, lids and related fasteners
• 02.00.00 / 00 Operator platform (from page 66) – platform structure, controls area, cabin-related covering parts including comfort cabin versions
• 04.00.00 / 00 Engine and accessories (from page 174) – diesel engine installation, pump drive and engine assembly, tandem and vibration variable-displacement pumps, cooling for engine and hydraulic oil, mounts and couplings; plates marked VERSION VT / VT-S
• 05.00.00 / 00 Hydraulic components, gear (from page 208) – driving gear, variable displacement pump for advance drive, feeding pressure valves, automatic controllers, distinctions between VERSION VT, VT-S and non-VT machines
• 06.00.00 / 00 Electricity (from page 252) – instrument panel / dashboard, engine and engine-room wire harnesses, covering parts for machines with and without cabin
• 08.00.00 / 00 Advance drive (from page 282) – travel drive hardware including tyre equipment shown at 3 bar, gear hub motors listed separately for HD+90 and HD+110
• 09.00.00 / 00 Steering system (from page 380) – steering units and related hoses, including a steering unit version marked Italien
• 12.00.00 / 00 Water system (from page 406) – sprinkling hardware, caps and seals called out for VT / VT-S only where the list requires it
• 25.00.00 / 00 Chip spreading unit (from page 430) – split spreading / gravel distribution equipment
• 26.00.00 / 00 Roller drum, vibration/oscillation (from page 458) – front drum suspension and bandage assemblies, unbalance weights for V/V/O/VT and V/V+H/V layouts, oscillation-belt service items
• 27.00.00 / 00 Edge forming unit (from page 544) – edge cutting and forming hardware, left-front assemblies shown with bearings and linkages
• 40.00.00 / 00 Special equipment (from page 568) – thermal skirts and other optional bodywork
• 41.00.00 / 00 Service sets (from page 652) – 500-hour and 2000-hour service kits, water-sprinkling driver and service kits, vibration/oscillation belt kit at 2000 h

Taken as a whole, the Hamm HD+ 90-110 H185 Spare Parts Catalog 2025 Illustrated Parts List PDF gives a workshop or parts counter the numbered breakdown of frame, platform, diesel installation, hydraulics, electrics, travel drive, steering, water, chip spreader, drums, edge former, special equipment and scheduled kits. You can trace a hub motor, a cabin covering, a variable pump or a 2000-hour oscillation belt back to a HAMM number instead of describing the part over the phone.

Liquid plastics, greases and tightening torques

Before the group plates begin, the catalogue prints a processing guideline for liquid plastics. Numbered markers on drawings (1 through 18 in the tables) point to specific HAMM material numbers and pack sizes. Examples printed in the tables include medium-strength threadlocker 00 382 620 / 00 263 397, galvanised-screw locker 00 393 037 / 00 393 029, high-strength screw locker 02 183 747 / 02 183 750, gap-filling retainer 00 382 639 / 00 263 419, narrow-gap retainer 01 234 188 / 01 234 196, surface sealant 00 382 604 / 00 323 705, vibrator/oscillator grease 01 205 757 / 01 204 025, travel-bearing grease 01 227 114 / 00 347 620, pipe-thread sealants, polyurethane glazing sealant 01 215 809, universal flange compound 02 329 280, anti-seize paste 02 696 157, two-component metal and plastic adhesives, sunroof silicone 00 278 297 and drum flange sealant 02 803 470. Application steps are printed with the tables: do not process below 15 °C, clean with cleanser 306371, flash off about three minutes, coat both the screw and a blind tapped hole, and allow roughly 30 minutes to handling strength and 12 hours to final strength.

Two tightening-torque chapters follow. Values valid for spare parts supplied up to 31.08.2016 use nuts to DIN 934 and screws to DIN 931 with μges = 0.12. Values valid from 01.09.2016 use ISO 4014 / 4032 / 4762 head styles with μges = 0.095. Both chapters list coarse and fine threads from M4 through M30 for property classes 8.8, 10.9 and 12.9, and the later tables add jaw widths (SW). The same pages tell you to check screws and nuts for tight seat and retighten if required. Those figures belong with fastener lines on the exploded plates when a replacement screw is ordered from this HD+ 90-110 H185 parts list.

Variants called out on the plates

The series banner on overview and group plates reads H185 (HD+ 90 – 110). Type-plate lines distinguish Schriftzug / type plate HD+90 from HD+110. Drum plates name 90 VV, 90 VV-HV, 90 VO, 110 VV, 110 VV-HV and 110 VO. Drive and pump plates split VERSION VT / VT-S from machines that are not VT / VT-S, and some hose lines are marked VERSION VO-S or VERSION VT-S. Cabin options appear as comfort cabin, version with cabin and version without cabin. Gear hub motors are listed separately as RADNABEN MOTOR HD+90 and RADNABEN MOTOR HD+110. Service kits on the last plate cover 500-hour and 2000-hour intervals plus water sprinkling and the VIO/OSZI belt at 2000 hours. Because the catalogue shows the full type scope, confirm the serial number and the options actually fitted before ordering a VT-only pump or a cabin-only covering.

Identify and order the correct HAMM number

With the Hamm HD+ 90-110 H185 Spare Parts Catalog 2025 Illustrated Parts List PDF open, a technician can locate a cracked footstep, a failed variable pump, a drum unbalance weight or a 500-hour kit, read the position on the drawing, and copy the part number and quantity from the multilingual list. Correct numbers and the printed validity ranges matter because HD+ 90 and HD+ 110, VT and non-VT, cabin and open platform, and the several drum layouts do not share every line item. Instant PDF delivery after payment means the 653-page catalogue is available on any device and can be printed at the bench or parts counter with no shipping wait.