Hangcha 2.0t-3.8t X Series Forklift Mast Parts Catalog 2017 – PDF Download

Description

Hangcha 2.0t-3.8t X Series Forklift Mast Parts Catalog 2017

This Hangcha 2.0t-3.8t X Series Forklift Mast Parts Catalog 2017 is the complete illustrated spare-parts reference for the mast assembly on 2.0 to 3.8 tonne X Series internal combustion counterbalanced forklift trucks. Published by Hangcha Group Co., Ltd., the 115-page PDF is written in both Chinese and English and covers the three mast variants used across the range: the 2-stage wide-view (SIMPLEX) mast, the 2-stage full-free-lift (DUPLEX) mast, and the 3-stage full-free-lift (TRIPLEX) mast. Every section pairs an exploded component illustration with a part table that lists item numbers, material codes, descriptions, quantities, and any model or capacity restrictions, so a technician can identify and order exactly the right component for a given truck and mast configuration.

File Details

• Manual type: Mast parts catalog (illustrated spare parts reference)
• Brand: Hangcha (Hangcha Group Co., Ltd.)
• Model coverage: 2.0t-3.8t X Series internal combustion counterbalanced forklift truck
• Publication year: 2017
• Language: Chinese and English (bilingual)
• Page count: 115 pages
• File format: PDF

Chapters Covered

The catalog is organized by figure number, with separate sections for each mast family and each subassembly. Main areas include:

• Fig. I – Complex roller assembly (SIMPLEX / DUPLEX / TRIPLEX)
• Fig. II – Cross roller assembly
• Fig. III – Side roller assembly
• Fig. IV – Fork assembly (2t-2.5t, 3t, 3.5t-3.8t)
• Fig. V – Cylinder hoop (with U-bolt, rubber pad, support plate, fasteners)
• Fig. VI – Chain seat (2t-3t and 3.5t-3.8t)
• Fig. 1 – Lifting part, SIMPLEX mast
• Fig. 2 – Chain assembly, SIMPLEX mast
• Fig. 3 – Mast, SIMPLEX
• Fig. 4 – Fork shelf assembly, SIMPLEX
• Fig. 5 – Side shifter assembly, SIMPLEX
• Fig. 6 – Side shift cylinder
• Fig. 7 – Right/left lift cylinder, SIMPLEX mast
• Fig. 8-1 / 8-2 – Tilt cylinder 2.0t-3.0t and 3.5t-3.8t
• Fig. 9 – Mast piping, SIMPLEX
• Fig. 10 – Lateral moving circuit
• Fig. 11 – Fourth oil circuit
• Fig. 12 – Lifting part, DUPLEX mast
• Fig. 13 – Chain assembly, DUPLEX mast
• Fig. 14 – Fork shelf assembly, DUPLEX
• Fig. 15 – Side shifter assembly, DUPLEX
• Fig. 16 – Right/left lift cylinder, DUPLEX
• Fig. 17 – Short lift cylinder, DUPLEX
• Fig. 18 – Mast piping, DUPLEX
• Fig. 19 – Lateral moving circuit, DUPLEX
• Fig. 20 – Fourth oil circuit, DUPLEX
• Fig. 21 – Lifting part, TRIPLEX mast
• Fig. 22 – Chain assembly, TRIPLEX mast
• Fig. 23 – Mast, TRIPLEX
• Fig. 24 – Fork shelf assembly, TRIPLEX
• Fig. 25 – Side shifter assembly, TRIPLEX
• Fig. 26 – Right/left lift cylinder, TRIPLEX
• Fig. 27 – Short lift cylinder, TRIPLEX
• Fig. 28 – Mast piping, TRIPLEX
• Fig. 29 – Lateral moving circuit, TRIPLEX
• Fig. 30 – Fourth oil circuit, TRIPLEX
• Optional Parts Lists 1 through 20 – lift-height indexed part number selection tables

Beyond the figure-and-table layout, the catalog provides the reference framework a parts counter or workshop needs to correctly match a component to a specific truck. Item numbers in the tables cross-reference the exploded illustration on the facing page, so a component can be identified visually and then confirmed against its material code. The optional parts lists at the end of each section break part numbers out by lift height, which matters because many mast components – cylinders, chains, hoses, pipes, and carriage hardware – change with the truck’s rated capacity and the specified lift height. The book also distinguishes between built-in side-shift masts and non-built-in (or hanging outside side-shift) masts, and between B transmission (Okamura), F transmission (Chinese), and MS transmission (Korea) variants where the parts reference requires it.

What This Catalog Enables

With this Hangcha 2.0t-3.8t X Series Forklift Mast Parts Catalog 2017 in hand, a technician or parts buyer can identify and order every mast-related component on the covered trucks: complex, cross, and side roller assemblies; fork and fork-shelf assemblies; side shifter assemblies and side shift cylinders; right and left lift cylinders (standard and short); tilt cylinders for both 2.0t-3.0t and 3.5t-3.8t; mast piping, lateral moving circuits, and fourth oil circuits; chains, chain seats, chain wheels, cylinder hoops, guide boards, adjustment shims, and the bolts, washers, O-rings, and dust seals that hold everything together. Because part numbers are broken out by mast type, capacity class (2t-2.5t, 3t, 3.5t-3.8t) and lift height, the correct item can be selected without guesswork or a call to the dealer. That matters directly for repair accuracy: mast components are load-bearing and safety-critical, and installing the wrong cylinder body, seal kit, or chain for a given mast height can affect lifting performance, free-lift travel, or safe operation. Repair kits listed at the end of the lift-cylinder and short-lift-cylinder sections (K1, K2, K3 series and equivalent part-numbered kits) also let a workshop order a full reseal in one step rather than picking seals individually.

Why This Matters

Forklift mast work is unforgiving – the right part-number and the right seal kit are what keep a truck lifting cleanly and staying in service. Having the factory parts tables in one searchable PDF removes the ambiguity that comes from generic aftermarket cross-reference sites, and it means a single download can serve both the repair decision and the purchasing step. The bilingual Chinese/English layout also lets a workshop read the original Hangcha part descriptions next to their English equivalents, useful when a material code needs to be confirmed against a supplier listing.

Delivery

IMAGES PREVIEW

This Hangcha X Series mast parts catalog is delivered as an instant PDF download – no shipping, no waiting, no physical media. Open it on a laptop, tablet, or phone in the workshop, print the exploded-view pages for the job at hand, and keep the file as a permanent parts reference for the whole 2.0t-3.8t X Series fleet.