HYVA HA160 HA180 Telescopic 1 Boom Spare Parts Catalogue – 7881378.0 Edition 06/2020

Description

HYVA HA160 HA180 Telescopic 1 Boom Spare Parts Catalogue

This HYVA HA160 HA180 Telescopic 1 Boom spare parts catalogue is the illustrated parts reference for the HA160 and HA180 telescopic boom cranes, published under logbook code 7881378.0, edition 06/2020. Every major assembly on the machine is broken down into functional groups, so a part can be found by page, table code, position number and variant code, then cross-checked against the exploded view before ordering.

Whether you are rebuilding a stabilizer leg, replacing a seal kit inside an extension jack, chasing a hydraulic fitting on the AVPS circuit, or matching a boom slide shoe to the correct extension, the HYVA HA160 HA180 parts catalogue gives you the part number and the picture that shows exactly where it sits on the machine.

File Details

• Manual type: Spare Parts Catalogue
• Brand: HYVA
• Model coverage: Telescopic 1 Boom HA160, HA180
• Logbook code: 7881378.0
• Edition: 06/2020
• Language: English (with Italian table headings retained)
• Page count: 166 pages
• File format: PDF

Chapters Covered

• Plate kit (Generic Gru)
• Plate kit (Version) — 5501744, 5501983
• BASE — bushings, thrust bearing ring, rollers, grease nipples, locking hardware
• Slewing — toothed rack, piston assembly, springs, seals
• Slewing (Retaining ring)
• SLEWING ASSY (Double Flange)
• Slewing Hydraulic jack (Hydraulic system)
• STABILIZER ROD (Manual expansion element)
• Stabilizer connecting rods extra-extensible (Manual expansion)
• Stabilizer connecting rods extra-extensible (hydraulic lengthening)
• STABILIZERS RODS SUPER EXTRA-EXTENSIBLE (hydraulic system)
• Stabilizer Hydraulic jack (Hydraulic system)
• Stabilizer Hydraulic jack (Retaining ring)
• STABILISER RAM (Hydraulic system)
• Stabilizer Hydraulic jack (Short)
• Stabilizer connecting rods (Revolving)
• Stabilizer connecting rods extra-extensible revolving
• Stabilizer Hydraulic jack (Revolving)
• CONTROL DEVICES LOCKING FOR OUTRIGGERS LEGS
• STABILITY CONTROL (standard-extra)
• ROD EXTENSION HYDRAULIC CYLINDER (Extra-extensible)
• ROD EXTENSION HYDRAULIC CYLINDER (Hydraulic system)
• HYDRAULIC PLAN OUTRIGGERS WITH HYDRAULIC PULL-OUT
• Solenoid valve (STABILIZER CONTROL VALVE)
• CONTROLS (4 section)
• Control valve ass’y (not CE)
• DOUBLE CONTROLS
• DOUBLE CONTROLS (CE)
• Control valve ass’y (EN12999-A3)
• Manifold (LIG NO CE)
• Hydraulic system (not CE)
• Hydraulic system
• A.V.P.S. (Hydraulic system)
• 5th extra function kit — closed centre spool
• 5th extra function kit — open centre spool
• 6th extra function kit — closed centre spool
• 6th extra function kit — open centre spool
• Hydraulic oil tank
• Hydraulic oil tank (CE)
• High pressure filter
• Column
• Lifting hydraulic cylinder (Hydraulic system)
• Lifting hydraulic cylinder
• 1st Boom
• 1st Extension
• 1st Extension hydraulic (Hydraulic system)
• 1st and 2nd extension hydraulic cylinder
• 2nd Extension
• HOOK KIT
• 2nd extension hydraulic cylinder (Hydraulic system)
• 3rd EXTENSION
• 3rd extension Hydraulic jack (Hydraulic system)
• 3rd and 4th extension hydraulic cylinder
• 4th EXTENSION (4S)
• 4th EXTENSION
• 4th extension Hydraulic jack (Hydraulic system)
• 5th EXTENSION (5S)
• 5th EXTENSION
• 5th extension Hydraulic jack (Hydraulic system)
• 5th extension Hydraulic jack
• 6th EXTENSION
• 6th extension Hydraulic jack (Hydraulic system)
• 6th extension Hydraulic jack
• LOAD INDICATION SYSTEM (LIS/RLC)
• 1st Additional actuation (2S)
• 2nd ADDITIONAL ACTUATION (2S)
• 1st ACTIVATION FOR 4S
• 2nd ADDITIONAL ACTUATION (4S)
• 1st – 2nd (ACTUATION)
• Plates (TOOL)
• ATTACHEMENT FOR WINCH
• Assembly kit
• CONTROLS WITH THERMOFORMABLE (RDC EBB-X)
• Control valve (4 section)
• ROTATION CONTROL (EN12999-A3)
• STABILITY CONTROL (EN12999-A3)
• STABILITY CONTROL (RDC)
• CONTROLS (RDC EBB-X TCU-ECM4)
• Wireless control kit (CAN BUS)
• Hydraulic oil tank (RDC-EBB)
• LOAD INDICATION SYSTEM (RDC)
• HA160-HA180 CC — Base, Controls, extra function kits
• RECOMMENDED SPARE PARTS — seal kits, oil filters, filtering cartridges, bushings, buttons, slide shoes, sensor units, batteries and wireless control components

Read together, this contents list shows the HYVA HA160 HA180 catalogue is not a single-section document: it is a full parts breakdown of the crane, split into stabilizer group, slewing and base group, hydraulic control group, boom extension group, lifting group, load indication group and electrical/wireless control group. The catalogue also lists the recommended spare parts that HYVA flags for stocking, so a workshop can plan what to keep on the shelf for an HA160 or HA180 in regular service.

How the Catalogue is Organised

Each part page carries a table code and a sheet number in the top-right header (for example 5420122-1.0 for the BASE, or 6210385-2.1 for the 1st Extension hydraulic system). Below that header, an exploded drawing shows every item with a callout number. A parallel table repeats the same number, together with the variant code, quantity and description — so the drawing and the ordering list always agree.

The main table index divides the machine into functional groups and gives each group a page, table code, quantity, heading, version and validity marker. The catalogue also reminds the user that the table code is for internal organisation only and should not be used to order spare parts, while individual part codes are the codes to enter on the HYVA restricted ordering area.

Variant codes (marked RC or a variant number) appear next to many rows. These flags tell you that more than one version of that assembly exists across production, so it is important to check the variant before ordering a slide shoe, seal kit, hydraulic fitting or control valve element.

What a Technician Can Do With This Catalogue

• Identify a part by page, table code, position number and variant code
• Confirm fitment across the HA160 and HA180 Telescopic 1 Boom versions
• Rebuild stabilizer and outrigger assemblies with the correct rods, cylinders and seal kits
• Service slewing, lifting and extension hydraulic cylinders using the exploded jack drawings and seal kit part numbers
• Repair hydraulic circuits — fittings, bonderized tubes, flexible hoses, solenoid valves, manifolds and control valve elements
• Match boom extension hardware — slide shoes, sliding blocks, adjusting screws, buttons and clamps — to each extension section (1st through 6th)
• Order load indication, RDC, RLC, LIS and CAN-BUS wireless control components
• Check extra function kit contents (5th and 6th function, open and closed centre spool)
• Stock the recommended spare parts list — filters, cartridges, bushings, seal kits and sensors

The benefit of using the parts catalogue rather than guessing is simple: the exploded view and the table sit together, so the same number that identifies the item on the drawing is the number you write on the order. That removes the most common cause of a wrong part arriving — ordering a seal kit, slide shoe or hydraulic fitting by description alone.

Why This Catalogue Matters

Cranes like the HA160 and HA180 are built from a large number of shared and variant components. A base assembly, for example, uses bushings, a thrust bearing ring, rollers, grease nipples, locking hardware and blocks that are described across two sheets (5420122-1.0, sheets 1/2 and 2/2). Getting the right one matters — the difference between the upper and lower bushing, or between a standard and variant thrust bearing ring, decides whether the slewing assembly seats correctly.

For the hydraulic side, the catalogue lists each cylinder’s component stack: cylinder, piston, close nipple, rod unit, O-ring joints, anti-extrusion rings, W-rings, seals and the corresponding seal kit. That level of detail is what allows a workshop to rebuild a stabilizer jack or a boom extension jack rather than replace the whole unit.

The HYVA HA160 HA180 spare parts catalogue also captures the electrical and control layer — inclination sensors, encoders, proximity switches, transmitter and receiver units, joysticks, emergency stop buttons and wireless control batteries — so fault-finding on the load indication and remote control systems can be matched back to the correct part number.

Ordering With Confidence

Because each page is an exploded illustration with a numbered list, the HYVA HA160 HA180 Telescopic 1 Boom parts catalogue works as a paper-equivalent reference you can keep open next to the machine. Look at the drawing, read the part number off the list, then order. When the same page shows two versions of an item, the variant code on the list tells you which one belongs to your machine.

If you maintain an HA160 or HA180 crane, having this catalogue on file means every disassembly, rebuild or spare-part order starts from the correct reference — not from a photo or a description.

IMAGES PREVIEW

Instant Delivery

The catalogue is delivered as a PDF, available for immediate download after checkout — no shipping, no waiting. Open it in any PDF reader on a laptop, tablet or phone, print the pages you need for the workshop, or keep the whole file on a shop computer for quick reference. Whether you are rebuilding one jack, replacing a stabilizer rod, or stocking up on recommended spare parts for a fleet of HA160 and HA180 booms, the HYVA HA160 HA180 Telescopic 1 Boom Spare Parts Catalogue — logbook code 7881378.0, edition 06/2020 — puts every part number and every exploded view in your hands the moment you need them.