JCB Fastrac 125 135T 145T 155T 185Ti & Contractor 150T Parts Catalogue 9802/6600 PDF

Description

JCB Fastrac Parts Catalogue 9802/6600 – Full Machine Coverage

This is the complete parts catalogue issued under document number 9802/6600, covering the JCB Fastrac 125, Fastrac 135T, Fastrac 145T, Fastrac 155T, Fastrac 185Ti, Fastrac-155T, Fastrac-185Ti and Contractor 150T. It is organised as an illustrated parts list rather than a repair guide, so every page pairs exploded artwork with itemised part numbers, change numbers, descriptions, remarks, usage codes and quantities.

Because the catalogue is split into machine groups with serial number breakpoints, it lets you identify the correct part for a specific build rather than guessing from a generic listing. Entries flag supersessions, parts no longer available, and alternative part numbers to use where an original has been replaced.

File Details

• Manual type: Parts Catalogue (illustrated parts list)
• Brand: JCB
• Document number: 9802/6600
• Models covered: Fastrac 125, 135T, 145T, 155T, 185Ti, Fastrac-155T, Fastrac-185Ti, Contractor 150T
• Language: English
• Format: PDF
• Page count: 1651 pages

Chapters Covered

The catalogue is arranged in lettered sections, each broken into illustrated frames. Every frame carries its own item table, so parts can be traced from the drawing straight to the number.

• A – Attachments: weight tray assemblies, front hitch assembly, front DIN 3 plate and tow point, guard and propshaft front PTO, rear hitch assembly, pick-up hitch, ladder hitch assemblies (Scharmuller and Rockinger), trailer couplings including Rockinger 260, 248RD, 274S, 850R and the 225G150 40mm automatic, swinging drawbar with and without ladder hitch, claw hitches CAT 2 and CAT 3, drawbar assembly, lower links CAT 3, rear decks and support frames, rear under run bar, lift rod assemblies including heavy duty, top link assemblies (eye end, hook type, front), stabilisers and automatic stabiliser, kits
• B – Bodywork, Cab and Loader End: chassis and fitments including extended wheelbase conversions at 750mm and 1450mm, bonnet and fittings, bonnet release, engine access steps, front and rear fenders, pannier units left and right hand, hydraulic tank, fuel tank, mountings for front lights, ABS socket bracket, trailer socket bracket, chock mountings, bodywork rear end less hitch and ladder, cab, cab base, cab frame, cab insulation, cab glazing, direct glazing replacement material, doors left and right hand in manual and alternative versions, mirrors, instrument panel covers and brackets, radio console, seating including air suspension with lock out and passenger seat, seat belts, sun visor, toolbox, roof hatch, rear opening window
• C – Electrics, Machine, Cab and Engine: machine electrics harnesses, harness connectors (Sumitomo), harness mountings and supports, electrical switches, pneumatic valve assembly, additional electrics with Safim trailer braking Italian option, head lights, rear combination lights, number plate lights, fog lights, beacon and hazard warning, reflectors, work lights including optional and cab mounted, marker lights, horn, instrument panel, instrument cluster, control panels with and without rear hitch, draft control switches and panels, column switches, fuse box and relays, battery and fittings including isolator switch variant, clock, ashtray and lighter, tachograph installation, area/diff lock cut-out, alternators in 85A and 100A, alternator mountings, starter motors, engine heater installations, engine stop solenoid installations, cold start and ether installation, air conditioning assembly, installation and intake
• D – Controls, Machine and Engine: clutch master cylinder and actuation circuit, clutch servo, gearshift 5/6 speed, gearshift manual range change, air assisted range change, pneumatic gear change ram and valve assembly, controls linkage for speed gearbox, pedal assembly, control linkages and valve covers for 2 spool, 3 spool and 4 spool valves, valve flow control, pick-up hitch control, hitch release control, PTO lever control, throttle controls including hand throttle, speed limiter installation, gearbox identification
• E – Hydraulics including Steering: neutral circuit, transmission circuit, transmission cooling circuit, 2/4WD front and rear PTO circuit, differential lock circuit, rear hitch circuit, front hitch circuit, auxiliary front and rear circuits in 2 spool and 4 spool form, auxiliary free flow return front and rear, flow divider rear, gearbox balance pipework, steering hose and pipework, steer and suspension pumps, auxiliary pumps at 25L, 32L and 40L per 1000 revs, auxiliary pump options, transmission filter, tank mounted hydraulic return filter, valve components, valve assemblies in 2, 3 and 4 spool with adapters, valve sections including inlet with main relief, 3 position single/double acting, 4 position with float, draft control solenoid operated, main relief valve, rear hitch valve, solenoid valve, flow regulator and diverter valve, front hitch rams, rear hitch rams at 80mm and 85mm, suspension rams including cushioned versions in 40mm, 45mm and 50mm
• F – Axles, Wheels and Transmissions: front axle assemblies for 30/40/55 KPH, 65 KPH, 72 KPH and 75 KPH including twin caliper brake variants, front axle drive heads with no-spin and Maxtrac differentials at 12.24:1, 16.2:1, 19.2:1 and 19.5:1, differential components, front hubs and components including twin caliper high speed hubs and the 3 to 4 pin upgrade kit, rear axle assemblies including 3 pin and 4 pin planetary hubs, narrow and wide wheel bearings, dummy axle six wheeler build, PD70 and PD90 variants, rear axle drive heads, rear differential assembly, rear hubs for PD70 and PD90, rear PTO installation, axle lock stops, drive shaft catchers, front and rear axle drive propshafts including extended wheelbase versions and Horsch skid unit, transmission propshafts, wheels and tyres for 75 KPH and for 30, 40, 55 and 65 KPH in front and rear fitments
• F – Gearboxes and PTO: splitter and PTO gearboxes with clutch pack installations in helical and spur gear versions, input and clutch release assemblies, gear group output and intermediate, selector mechanism, selector clutch packs, solenoid assembly, PTO clutch assemblies front and rear, 5 and 6 speed gearbox installations, case assemblies, mainshaft assemblies, input shaft assembly, counter shaft assembly, front cover assembly, selector controls, remote control assembly, repair kits, range gearbox assemblies, gearbox housings, input and reverse gear shafts, output shaft groups, four wheel drive output shaft groups in standard and heavy duty form, gear change manual and air assisted with short and long levers, Selectronic selector shafts and forks, front transfer gearbox, rear and front PTO propshafts, PTO guards, transmission gearbox assembly for both manual and air assisted range change
• G – Brakes: brake system schematics, brake circuits for cab, chassis and pannier, brake calipers front and rear including twin caliper versions, parking brake and air actuator, air/hydraulic actuator, unloader valve, auto drain valve, brake valve, handbrake controls in 2 and 3 position, inverse relay valve, brake threshold valves, check valves, trailer brake valve and coupling including palm couplings, C type couplings, Duomatic coupling and Italian variants, single line hydraulic trailer braking installations, Safim hydraulic trailer braking, antifreeze pump for air brake circuit, twin air gauge installation, brake circuit clamps
• H – Steering: steering installations, steering shaft front and intermediate, steering motors and their service kits, steering column
• S – Suspension: front suspension assemblies including heavy duty and twin caliper brake versions, rear suspension hydraulics including heavy duty twin caliper, rear suspension linkages, charge valve
• T – Engines 1006-6 and 1006-6T: engine complete and short builds for YA, YB and YD, block assemblies, crankshaft, bearings, pistons and con-rods, fans, pulleys and fan belts including optional arrangements, timing case, camshaft and gears, auxiliary drive, flywheel and housing, engine mountings, cylinder heads, rocker assembly with push rods and tappets, rocker covers, lifting plates, induction and exhaust manifolds, air filters, exhaust systems and exhaust brake installation, water pump, thermostat and housing, radiator and hoses with fittings and mountings, air charge cooler and pipework, sump and fittings, oil pump and relief valve, piston cooling jets, oil filter, oil cooler and pipework, oil feed pipes, fuel injection pumps, injectors and injection pipes, fuel pipes, fuel heater, fuel sediment filter, fuel filter, fuel lift pump, turbocharger and pipework, air compressors in 150cc, 159cc, 229cc and 250cc, compressor pipework, air conditioning compressors, gasket sets top and bottom
• U – Engine 6BTA5.9-C185: engine complete and short, block assembly, crankshaft, bearings, pistons and con-rods, fans, pulleys and belts, timing case and camshaft gears, auxiliary drive, flywheel and housing, engine mountings, cylinder head, rocker assembly and cover, lifting plates, induction and exhaust manifolds, air filter, exhaust system, air intake heater, water pump, thermostat and housing, radiator and hoses, air charge cooler, sump and fittings, oil pump, oil filter and cooler, oil feed pipes, fuel injection pump and service parts, injectors and injection pipes, fuel pipes, fuel sediment filter, fuel filter, fuel lift pump, turbocharger and pipework, compressor and compressor pipework, air conditioning compressor and installation, top and bottom overhaul gasket sets
• Machine Index: dedicated page index for each machine group – Contractor 150T, Fastrac 125, Fastrac 135T, Fastrac 145T, Fastrac 155T, Fastrac 185Ti, Fastrac-155T and Fastrac-185Ti

IMAGES PREVIEW

What ties the catalogue together is the way each frame handles build variation. Serial number breakpoints are printed directly against the affected part numbers, so a frame may list one component up to a given serial and a different one from that serial onward. Where a part has been superseded, the entry shows the multi-supersession and points to the replacement items, including cases where a part is no longer available and must be built from several listed components instead. Usage codes and remarks call out regional differences such as Italian, North American, Australian, German and French builds, and note where a part is only fitted when a particular option is present.

What This Parts Catalogue Lets You Do

With this catalogue in hand you can identify and order the correct component for a Fastrac 125, 135T, 145T, 155T, 185Ti or Contractor 150T rather than relying on a part that looks similar. You can trace an assembly from the exploded drawing to the item number, check whether the part on your machine matches the serial number breakpoint, and confirm whether an older number has been replaced before you buy.

The level of detail supports real workshop and parts-counter work: rebuilding a front or rear hitch, replacing a lift rod or top link, working through the splitter and PTO gearbox, ordering the right brake caliper or trailer brake valve for the build, matching wheels and tyres to the correct track and speed rating, and finding engine and turbo components for both the 1006-6 family and the 6BTA5.9-C185. Separate chapters cover the cab and bodywork, so trim, glazing, doors, seating and mirrors are all listed alongside the mechanical assemblies.

Because the catalogue documents supersessions and no-longer-available parts, it also helps avoid the dead end of ordering a number that has been withdrawn. Where an assembly has been changed, the catalogue shows the parts needed to complete the job properly.

This is a digital PDF parts catalogue delivered instantly after purchase. There is no shipping and nothing to wait for – the file can be opened on a laptop, tablet or phone in the workshop office or at the machine, and individual frames can be printed when a paper copy is more convenient on the bench.