John Deere 9450 Self-Propelled Combine Parts Catalog PC2800

Description

File Details

• Manual Type: Parts Catalog
• Brand: John Deere
• Model: 9450 Self-Propelled Combine
• Publication Number: PC2800
• Language: English
• Page Count: 818
• File Format: PDF
• Publication Date: 27-JUN-00 (with revision pages dated 29-FEB-00, 03-APR-00, 01-MAY-00 and 30-MAY-00)

Chapters Covered

This John Deere 9450 Self-Propelled Combine Parts Catalog PC2800 is divided into the following sections:

• Section 10 – General Information
• Section 20 – Engine Accessories
• Section 25 – Engine
• Section 30 – Fuel and Air
• Section 40 – Electrical
• Section 50 – Power Train
• Section 60 – Steering and Brakes
• Section 70 – Hydraulics
• Section 80 – Body and Shields
• Section 90 – Operator’s Station
• Section 95 – Air Conditioning and Heating
• Section 100 – Feeder House
• Section 110 – Threshing and Separation
• Section 120 – Cleaning Shoe
• Section 125 – Elevators
• Section 130 – Residue Disposal
• Section 140 – Drives
• Section 150 – Grain Tank and Unloading Auger
• Section 155 – GreenStar Yield Mapping and Monitor Systems
• Section 170 – Decals
• Section 180 – Numerical Index

Each section contains exploded-view illustrations with keyed part numbers, descriptions, quantities and serial number ranges where applicable. The catalog covers engine components including cylinder block, crankshaft, camshaft, cylinder head, turbocharger, oil pump, water pump, thermostat and flywheel. Fuel and air systems include fuel injection pump, injection nozzles, fuel tank, fuel filter, air cleaner, intake tubes and exhaust. Electrical coverage spans batteries, alternator, starting motor, wiring harnesses, sensors, relays, circuit breakers, lights and the central electronics module.

Power train content includes transmission gears, bearings, shifter forks, differential, final drive, hydrostatic drive pump and motor, control cables and four-wheel drive hydraulic lines. Steering and brakes covers steering pump, steering cylinder, tie rods, brake pedals, master cylinder, slave cylinder, brake shoes and drums. Hydraulics includes main hydraulic pump, oil cooler, accumulators, solenoid control valves, header lift cylinder, contour master tilt cylinder, reel drive and chaff spreader components.

Body and shields covers separator frame, side shields, gullwing doors, radiator door, rear hood, engine compartment, fuel tank steps, tool box and engine access platform. Operator’s station includes cab support, cab panels, roof, glass, door latch, seat console, air seat suspension, operator’s seat, armrest control panel, steering column, gearshift lever, cornerpost display, overhead console and radio. Air conditioning and heating covers blower motors, evaporator, heater housing, compressor, condenser, receiver-dryer, water valve and refrigerant hoses.

Feeder house covers front variable drive sheave, reverser gear box, drive tighteners, drive shields, feeder house frame, shell, upper shaft, floor, conveyor idler, dust fans, return floor and position sensor. Threshing and separation includes cylinder door, shear bar, rasp bar cylinder, spike tooth cylinder, concave assembly, beater grate, beater, straw walkers and cranks. Cleaning shoe covers supply augers, cleaning fans, precleaning chaffer, chaffer element, sieve element, shaker pan and sieve frame.

Elevators includes clean grain elevator, tailings elevator, upper and lower augers, loading auger and gearcase. Residue disposal covers chopper door, tail board, tri-rod chopper, chopper housing, transport sprockets, corn deflector, straw spreader, spreader curtain and chaff spreader disc. Drives section covers engine gearcase, main gearcase, primary countershaft, header electromagnetic clutch, cylinder drives, beater drive, separator fan drive, chopper drives and tailings drives.

Grain tank and unloading auger includes tank top, tank base, curtains, vertical auger lower gear case, vertical unloading auger, swing cylinder, horizontal auger swivel, auger support, drive gear case, cross augers, covers and unloading drive cylinder. GreenStar yield mapping covers position receiver, display, mobile processor, mass flow sensor, moisture sensor and datastore harness. Decals section lists safety decals, right-hand and left-hand decals, front and rear decals, tire and wheel decals and belt routing references in multiple languages.

Product Identification and Serial Numbers

The 9450 Self-Propelled Combine Parts Catalog PC2800 uses the Product Identification Number (PIN) to confirm machine configuration. The PIN plate is located near the right-hand side of the tool box and contains two lines. The first line begins with the manufacturing unit code, followed by the model identifier, configuration code and a sequential number used in the serial number column. The second line indicates the type of product. Engine serial number plates vary by manufacturing location, with examples shown for Dubuque, Saran and Torreon options. The engine identification format includes manufacturer designation, number of cylinders and liters, fuel type or special condition, engine serial number and engine application. For the 9450, the 6068 engine (6.8 liter) is identified with DF for non-turbocharged diesel or TF for turbocharged diesel.

Why This Parts Catalog Matters

Ordering the correct part for a 9450 Self-Propelled Combine requires more than a general understanding of the machine. Production changes occurred across the model run, and the same assembly may use different components depending on the serial number. The John Deere 9450 Parts Catalog PC2800 resolves this by listing part numbers alongside the specific serial number ranges where each part applies. Every illustration is keyed to a parts list that includes the part number, description, quantity and remarks about usage. Change indicators, kit information and boxed service assemblies are clearly marked so you can identify current parts versus non-current parts and service assemblies versus individual components.

Whether you are replacing a failed bearing in the feeder house, tracking down a hydraulic leak in the contour master system, repairing the unloading auger drive or sourcing a replacement sensor for the GreenStar yield mapping system, this catalog provides the exploded views and part numbers needed to identify exactly what is on your machine. The numerical index at the back lists every part number with its grid location, making it possible to look up a known part number and find where it appears in the catalog.

IMAGES PREVIEW

Instant PDF Delivery

The John Deere 9450 Self-Propelled Combine Parts Catalog PC2800 is delivered as an instant PDF download after payment. No shipping, no waiting for a physical book. The file can be viewed on any device, printed for use in the shop and kept on hand for quick reference. With 818 pages of parts information covering every major system on the 9450 combine, this catalog gives you the ability to identify and order the right parts with confidence.