Kalmar E-one RTG Crane 412621-16L-2040C-ZE Spare Parts Catalogue PDF – Serial 41300-41303

Description

Kalmar E-one RTG Crane 412621-16L-2040C-ZE Spare Parts Catalogue PDF – Serial 41300-41303

File Details

• Manual type: Spare Parts Catalogue
• Brand: Kalmar (Cargotec)
• Machine model: E-one 412621-16L-2040C-ZE
• Machine type: Rubber Tyred Gantry (RTG) Crane
• Serial numbers covered: 41300-41303
• Language: English
• Page count: 686 pages
• File format: PDF
• Publication date: 14.05.2015
• Publisher: Cargotec Finland Oy, Kalmar Parts

This Kalmar E-one 412621-16L-2040C-ZE rubber tyred gantry crane spare parts catalogue is the illustrated parts reference for machines in the 41300-41303 serial range. Published by Cargotec Finland Oy on 14.05.2015, it runs 686 pages and maps every major assembly on the crane – engine, driveline and axle, steering, suspension, load handling, cab and frame, and common electrics – to exploded drawings and detailed parts tables. Each text page carries part number, description, order number, quantity and standard, exactly as needed to place a parts order with an authorised Cargotec or Kalmar dealer.

Chapters Covered

• 0 Complete machine – machine-wide references and index structure
• 1 Engine – complete engine breakdown, cylinder block, cylinder liner kit, gear housing, breather, drive gear, vibration damper, electrical equipment, thermostat, alternator, mounting set, belts, fan drive, fuel filter, flywheel housing, fuel pump, flywheel, front cover, hose connections, oil cooler, oil filter, dipstick, oil pump, oil filling, oil sump, electronics, gear, nozzle, camshaft, cylinder head, injector, isolator, turbocharger, lever, magnetic coupling, level sensor, mounting plate, starter motor, pipework, thermostathousing, valve cover, filter, connecting part, water pump, wiring harness, fuel system, mechanical parts, air intake and exhaust outlet
• 3 Driveline / Axle – drive axle, bogie mount, bogie left, bogie right, tie rod, planetary gear, electric motor, wheel hub non-driven, wheel hub driven, gearbox complete, differential, disc brake
• 5 Steering – controls and instruments, steering system
• 6 Suspension – tyres and rims
• 7 Load handling – lifting / lowering, hoisting device assembly, bearing, clutch, brake, gearbox, electric motor, shield / lifting brake, cover, lifting rope, breather, side shift, lock, sensor mounts, position sensor, service platform, emergency stop, chain traction trolley, drive gear, wheel assemblies, skews for trolley, trolley equipment, load carrier, headblock, pulley installation, sensors, catch, jib crane, centralised lubrication
• 9 Cab, frame, fittings – cab wiring harness, controls and instruments, panel, controller handle, PLC devices, electric box, telephone/cabin, switch panel, pilot light panel, safety and emergency equipment, seat, auxiliary seat, cabin heater, electric heater, fan, air conditioning, wiper / washer system, lighting system, glass / windows / mirrors, visor, pane, floor glass, cab structure and suspension, doors, grates, shield plates, service hatches, rescue equipment, cab interior, monitor, frame columns, truss rods, rubber bumpers, mast, guards, service platforms, camera mounts, antenna mounts, main beam, cable shelves, walkways, front frame, rear frame, arms, wheel shields
• 11 Common electrics – distribution of electricity, electric room, lights mounts, electrical equipment, inverter, electric room mounts, cable carriage, cable drum, drive device, cable shelf, carriage, el. equipment front and rear frame, push button housings, electrical equipment for mainbeam and trolley, cubicles, electric box X150, electric box RCN0015730, electric box RCN0015740, ground station for GPS system
• B Index list – full numeric part number index mapped to section and page

Laid out page by page, this Kalmar E-one spare parts catalogue pairs each exploded illustration with a facing text table, so a technician can read a reference number off the drawing and match it in the same row of the parts list. Assemblies that are sold as a complete spare are marked with the prefix N5899940, and assemblies that are not available as a separate spare are marked N5906730 – a small but critical distinction when placing an order for a rubber tyred gantry crane.

What Each Section Gives You

The engine chapter is by far the deepest, running to well over a hundred pages of component breakdowns. It covers the cylinder block, cylinder liner kit, gear housing, camshaft and valve cover, injector and turbocharger assemblies, fuel pump internals, oil cooler and oil pump, water pump, starter motor and alternator, plus the full mounting set, fan drive, belts, thermostat housing, pipework and wiring harness for this specific E-one build. Every gasket, seal ring, plug, dowel pin, screw and bearing is listed with its part number, quantity and any applicable standard, which means a top-end or bottom-end rebuild on the 412621-16L-2040C-ZE can be planned part by part without guesswork.

Driveline and axle pages break the crane down into left and right bogies, each with its own tie rod, planetary gear, electric motor, disc brake and either a non-driven or driven wheel hub. The driven hub is further exploded into gearbox complete, planetary gear, wheel hub and differential sub-sections, so you can source exactly the gear, bearing, seal or shim you need rather than an entire assembly. Steering, suspension and tyre pages cover the smaller wear items – tyres, rims, valves – along with the steering system controls and instruments.

The load handling chapter is the second largest block and deals with everything above the trolley: the hoisting device assembly, its bearing, clutch, brake, gearbox and 200 kW hoist motor, the lifting rope with its individual rope lengths, the breathers, the side shift lock and sensor mounts, the chain traction trolley with its drive gear, gearbox and 30 kW motor, the wheel assemblies, the trolley skews with their rollers and Belleville springs, the rear hitch, the equipment trolley, the headblock with pulleys and sensors, the catch mechanism, the electric box X810, the jib crane and the centralised lubrication system.

Cab, frame and fittings pages document the driver environment and the structural envelope around it: wiring harnesses for seat, cabin, cabin 220 V, heater and air conditioning, the two controller handles, the PLC devices, the main electric box, the switch and pilot light panels, the seat and auxiliary seat, cabin and electric heaters, the fan, the air conditioning indoor and outdoor units, the wiper and washer system, lighting, glass, doors, shield plates, service hatches, rescue equipment, the cab interior monitor, and every frame component from the truss rods and rubber bumpers up to the main beam, cable shelves, walkways, front and rear frame sections and wheel shields.

Common electrics rounds out the catalogue with the distribution of electricity throughout the machine. It covers the electric room, its mounts, the light mounts and lights, the inverter, the cable carriage and cable drum with its drive device, the carriage, the electrical equipment in the front frame, rear frame, main beam and trolley, the push button housings, the cubicles, electric box X150 and the two large electric boxes RCN0015730 and RCN0015740, plus the ground station for the GPS system. Every terminal block, fuse, contactor, relay, converter, main switch and signal light referenced on the wiring diagrams is itemised with its part number.

Why This Catalogue Matters

On a rubber tyred gantry crane, a wrong part number costs more than the part. It costs the downtime of a container block, the risk of a second failure, and the labour of pulling an assembly twice. This Kalmar E-one 412621-16L-2040C-ZE spare parts catalogue removes that risk: it was written for the serial band 41300-41303 specifically, not for the E-one family in general, so every part shown on a page is the part that was fitted to these four machines when they left the line. If you maintain, service or overhaul a Kalmar RTG in that serial range, this is the document that lets you quote a job, order the kit and carry out the repair without phoning a dealer for a picture.

Use it to identify a component from an exploded drawing, to check the quantity of fasteners and seals needed for a rebuild, to confirm which assemblies are sold as complete spares and which are not, and to cross-reference part numbers against the numeric index at the back. Because the same text page holds the part number, description, order number, quantity and standard, you can hand the exact row to a parts department and get the right box on the first attempt.

Delivery

IMAGES PREVIEW

The Kalmar E-one RTG crane 412621-16L-2040C-ZE spare parts catalogue is delivered as an instant PDF download – no shipping, no waiting, no physical book to lose. Open it on a laptop in the workshop, a tablet on the crane, or a phone at the parts counter. Print the pages you need for a specific job, or keep the whole 686-page document on file as a permanent parts reference for the life of the machine. Buy once, download immediately, and use it every time a part has to be identified or ordered.