Komatsu 730E-10 Mining Truck Parts Manual – AFE84-A S/N A50002-A50004 PDF

Description

Komatsu 730E-10 Mining Truck Parts Manual – AFE84-A, Serial Numbers A50002 to A50004

This Komatsu 730E-10 parts manual is the illustrated parts catalog for the AFE84-A 730E-10 mining truck in the Oceana Gold build, covering serial numbers A50002 through A50004. Every major assembly on the truck is broken down into exploded illustrations with ballooned item numbers, matched to an itemised parts list that gives the part number, the description and the quantity required. For anyone maintaining, rebuilding or repairing a 730E-10 haul truck, it is the document that turns a worn or damaged component into an orderable part number.

File Details

• Manual type: Illustrated parts manual / parts catalog
• Brand: Komatsu
• Model: 730E-10 (AFE84-A), Oceana Gold configuration
• Serial number coverage: A50002 – A50004
• Language: English
• Page count: 740 pages
• File format: PDF
• Contents: Exploded-view illustrations paired with itemised parts lists, part numbers, descriptions and quantities

Chapters Covered

• B – Engine & Related Parts (from page 1001): fan guard installation, fan installation, fan drive system, air cleaner piping and installation LH and RH, air cleaner assembly, powertrain installation, engine subframe mounts, engine cradle installation, engine components, dual walled exhaust piping between the rails, exhaust blankets between the rails, selective catalytic reduction (SCR) assemblies
• C – Cooling System (from page 1027): radiator installation, radiator and shroud, radiator and shroud assembly, low temperature core (LTC), high temperature core (HTC), radiator piping
• D – Fuel Tank & Related Parts (from page 1047): fuel tank installation, fuel tank assembly, fuel system piping, fuel tank quick fill RH, fuel tank gauge and wiring, DEF tank installation and piping, DEF tank, doser fluid supply module
• E – Electrical System (from page 1075): deck wiring harnesses and lights, battery box, engine harness brackets, front wheel speed sensor harness, rear axle housing service light, bleeddown manifold pressure switches and sensors, PLM sensor for rear suspensions, emergency engine shutdown, relay box assembly, auxiliary control cabinet components and internal wiring, vehicle electrical centres, exhaust system wiring harness, DEF system relay box, frame ground wiring
• F – Drive System (from page 1219): blower inlet duct installation, blower inlet heat flap installation, rear axle blower hose installation, blower pressure switch, retarding grid installation, wheel motor installation, wheel motor wiring, wheel motor piping RH and LH, control cabinet installation, control cabinet external wiring
• H – Hydraulic System (from page 1247): hydraulic tank installation and tank assembly, hydraulic tank piping for the hoist and steering circuits, hoist filter piping and installation, steering filter piping and installation, drive shaft installation, pump module installation and piping, hoist valve and overcenter valve installation, hoist control valve assembly, relief valve assembly, spool inlet section, overcenter valve assembly, hoist pump installation and assembly, steering pump installation, steering pump housings, rotating group, seal installation and control assembly, hoist cylinder piping and installation, hoist cylinder assembly with bearings, steering control unit piping and assembly, brake valve piping and installation, cab and hydraulic brake cabinet piping, hydraulic brake cabinet hose routing, hoist pilot valve piping and manifold, dual relay valve piping and installation, brake manifold, shuttle and junction block piping, front brake piping, rear brake piping, rear disc and parking brake piping, brake accumulator installation, piston accumulator, steering bleeddown manifold installation and piping, flow amplifier installation and hose fittings, steering cylinder piping and installation, steering cylinder and bearings, accessory drive piping, auxiliary hydraulic manifold, accumulator assembly, hoist and pump valve sensor installation
• J – Main Frame & Related Parts (from page 1389): frame and uprights, pin bore wear sleeves, engine access ladder LH and RH, hydraulic tank ladder, chassis loose components
• K – Operator’s Compartment & Control System (from page 1405): cab mounting hardware, cab insulation, cab vinyl, cab lights, manual holder, cab miscellaneous, cab door installation, door assemblies LH and RH, cab windows, cab external covers, cab hydraulic hose covers, operator seat installation and premium seat, seat suspension assembly, passenger seat installation, cab floormats, overhead dash module, radio antenna installation, radio module, front and rear speaker installation, steering column, instrument panel assembly, gauge panel installation, lower LH and RH dash modules, center console modules, shift lever, hoist lever, accelerator pedal, VID panel, Iridium controller and satellite antenna, KOMTRAX Plus II controller and antenna, KWB wireless radio and antenna, windshield wiper and washer reservoir, air conditioning piping and compressor, condenser, HVAC installation, HVAC vents, heater hose and drain hose installation
• L – Decks & Handrails (from page 1521): LH steps and platform, LH ladder handrails, RH and diagonal ladder handrails, LH and RH ladder installation, diagonal ladder installation, grille handrail, LH, RH and rear deck handrails, RH platform and ladder installation, LH, RH and center deck installation, LH and RH mirror installation, reinforce platform kit
• M – Guards & Mud Flaps (from page 1555): grille installation, grille inserts, hydraulic tank mud flaps, fuel tank mud flaps, body mud flaps, LH deck covers, control cabinet mud flaps, drive shaft guard
• Q – Front Suspension & Steering Linkage (from page 1573): spindle, hub and brake assembly, front disc brake assembly, steering arm installation, tie rod installation, tie rod assembly, front suspension installation, front suspension assembly
• R – Rear Suspension & Axle Housing (from page 1589): rear suspension installation, rear suspension assembly, rear axle housing installation, anti-sway bar installation, rear hatch cover installation, rear brake installation, rear disc brake assembly
• S – Wheels & Rims (from page 1603): front wheel installation, rear wheel installation, standard rim assembly, smart rim assembly rear outer
• T – Body & Related Parts (from page 1613): body and sling, body pivot, body guide and pads, dump body eyebrows, body heat shields, rock ejectors installation
• U – Decals & Plates (from page 1625): decals and warnings, grade and speed chart, lubrication chart
• V – Tools (from page 1645): tool group, flushing block, smart rim tool, KOMVISION tool group, charging manifold assembly
• W – Miscellaneous & Options (from page 1657): automatic lubrication system, lubrication pump sub-assembly, automatic lubrication system for the rear axle, tie rod and steering cylinder lubrication lines, lube pump and container assembly, auto lube filter assembly, vent valve assembly, check valve assembly, service centre with oil reserve system, service centre fill station, hubodometer installation, fire extinguisher, KOMVISION dash module, display module, controller box, camera harness routing, camera installation front, front left, front right, left, rear and right, radar harness routing, radar installation front, rear and sides, radar sensor assembly

Across 740 pages the manual walks the entire 730E-10 from the engine rails outward. The engine section covers the cooling fan and its drive, the air cleaner pipework, the powertrain mounting and the exhaust and SCR assemblies. The cooling chapter details the radiator, its shroud and the low and high temperature cores with the associated piping. Fuel and DEF coverage includes the tank, the quick fill, the gauge wiring and the DEF tank installation and piping. The electrical chapters trace harnesses, sensors, switches, relays and the vehicle electrical centres through the deck, frame rails, rear axle and auxiliary control cabinet. Drive system coverage handles the wheel motors, their wiring and piping, the retarding grid and the blower ducting. The hydraulic chapter is the largest single block and covers the tank, the pump module, the hoist and overcenter valves, the steering system, the brake circuits, the accumulators and the lubrication and bleeddown manifolds. Chassis, cab, deck, guard, suspension, axle, wheel, rim, body and decal sections complete the catalog, with tool groups and an extensive miscellaneous and options section covering the automatic lubrication system and the KOMVISION camera and radar installation.

How the Parts Data Is Laid Out

Each covered assembly opens with an exploded illustration. Callout balloons on the drawing correspond to numbered items in the list that follows, and every line carries a part number, a plain description such as a capscrew size, hose, gasket, seal, fitting or bracket, and the quantity used. Fastener lines show thread size, length and grade, so a replacement bolt can be matched exactly rather than approximated. Where an assembly is large enough to need it, the illustration is broken into detail views, so a small bracket or fitting hidden inside the main view still gets its own enlarged drawing. Where a component is serviced as a kit rather than individually, the manual points to the kit part number instead of listing the internal pieces.

What This 730E-10 Parts Manual Lets You Do

Order the right part the first time instead of guessing at a fastener bin or matching a hose by eye. Rebuild a hoist cylinder, a steering cylinder, a front or rear disc brake or a wheel motor with the correct seal, bearing, piston and ring part numbers in front of you. Replace a damaged hose, fitting, clamp or bracket on the hydraulic tank, the brake cabinet or the rear axle lubrication lines with the exact number for this build. Trace a wiring harness, pressure switch or sensor through the frame rails or the auxiliary control cabinet. Confirm which fasteners, washers and locknuts hold a guard, a deck, a handrail, a mud flap or a heat shield. Cross-reference the radiator, air cleaner, exhaust blanket and SCR assemblies. Check wheel and rim components, including the standard and smart rim assemblies and the adapter and stud arrangements. Look up decals and safety plates by part number so a repaint or refurbishment finishes with the right markings.

Why the Correct Part Number Matters on a 730E-10

A 730E-10 haul truck works in a narrow window between planned maintenance and unplanned downtime, and a wrong part number costs more than the part. A mismatched seal, fitting or fastener can mean a second teardown, a leaking circuit or a failed joint under load. Because this catalog is tied to the AFE84-A Oceana Gold build with serial numbers A50002 to A50004, the numbers it lists are the ones that belong on this configuration of the truck rather than a general listing that spans several builds. That specificity is what makes the manual useful in the shop, in the parts office or on the bench, whether the job is a scheduled component replacement or an emergency repair after a failure.

IMAGES PREVIEW

Instant PDF Delivery

The Komatsu 730E-10 parts manual is delivered as a PDF immediately after payment, with no shipping and no waiting on a physical book. Open it on a laptop, tablet or phone in the workshop, search a part number, or print the individual illustration and parts page you need and take it to the machine or the parts counter. Everything between the engine rails and the rim assemblies is in one file that stays available for the life of the truck.