Komatsu PC130-7 Excavator Spare Parts Catalogue – FEN1607-00-NI01 PDF

Description

Komatsu PC130-7 Spare Parts Catalogue – FEN1607-00-NI01

This is the full Komatsu PC130-7 Spare Parts Catalogue issued under document number FEN1607-00-NI01. It is the parts identification book used at the counter and in the workshop to look up the exact part number for any component on the PC130-7 excavator. Every figure group pairs a numbered exploded illustration on the left page with a corresponding parts list on the right page, so a technician can visually locate a component, read its index number, then jump straight to the part number, description, quantity and machine serial-number range that the part applies to. Serial coverage spans the NL50001 through NL52652 range, the N500001 and up range, and the N520001 and up range, along with the engine serial breakpoints at 101744 and 144677.

File Details

• Manual type: Spare Parts Catalogue
• Brand: Komatsu
• Model: PC130-7
• Document number: FEN1607-00-NI01
• Language: English
• Format: PDF
• Page count: 390 pages
• Machine serial coverage: NL50001 and upto NL52652 / N500001 and up / N520001 and up
• Engine serial breakpoints used in the book: 101744 and upto 144676 / 144677 and up

Chapters Covered

The catalogue is organised into the following figure groups, each with its own illustration page and matching parts list:

• Engine: Cylinder head, head cover, rear cover, head cover accessory, air intake manifold, air intake connection, exhaust manifold, turbocharger, heat shield, muffler, exhaust connection, cylinder block, front cover, idler gear, blind plug, oil pan and suction tube, oil level gauge, flywheel housing, flywheel, crankshaft, piston, crank pulley, camshaft and gear, tappet, rocker arm, coupling (PTO main), tacho drive cover
• Lubrication and cooling: Oil pump, turbocharger lubricating oil piping, oil filter, oil pressure switch, oil cooler, water pump, water pump pulley, cooling fan, fan spacer, fan spacer mounting, water connector, cooling fan bolt, fan belt, V-belt
• Fuel system: Injection pump, fuel injection pump (feed pump inner parts), fuel injection pump mounting, fuel injection piping, fuel injection pump lubricator, fuel control, fuel filter, injection nozzle, fuel return
• Electrical: Alternator, alternator mounting, starting motor, starting motor inner parts, cylinder block gasket kit, cylinder head gasket kit, water piping, engine name plate and regulation, main pump mount, engine bracket and main pump
• Engine related parts: Engine mount, engine mount bracket, remote filter mount, air cleaner and duct, fuel control, after cooler connector, air cleaner, spare parts, heater switch
• Cooling system: Radiator core and frame, oil cooler, net and shroud, after cooler and condenser, radiator piping, after cooler piping, fan guard, condenser and fan guard assembly air cooler
• Fuel tank and related parts: Fuel tank, fuel line arrangements with water separator fuel filter
• Electrical system: Battery, wiring (starting harness, main harness, battery harness and ground), horn
• Hydraulic system: Hydraulic tank, main valve connecting parts, main pump connecting parts, suction line, delivery line, oil cooler line, return line, drain line, boom line, arm and bucket line, attachment line, travel line, swing line, LS line, solenoid valve (valve/hose/clip), pressure switch, PPC main line
• Main frame and related parts: Revolving frame, boom foot pin
• Operator’s compartment and control system: Operator seat with belt, seat inner parts, floor frame covers, operator’s cab (grab and open lock), front window, window and roof ventilator, electrical, inside cover, door, wiring, additional lamps, monitor system, installation parts, cover, Komtrax G, cab with FOPS/mesh (standard and tunnelling), floor mat, air conditioner unit, hose routing, wiring harness AC, floor frame, floor frame with hour meter, floor frame with travel control, floor frame console, wiper electrical, pilot piping, floor mount, switch
• Guard: Hood, frame, door LH, door RH, partition, cover (upper), tool case, valve upper cover, hand rail, rear view mirror RH, counterweight, counterweight tunnel spec, counterweight mounting, under cover (LH/RH)
• Swing circle and related parts: Swing circle, swing machinery, swing motor connecting parts, swing joint related parts
• Travel and lower piping: Travel piping, final drive (sprocket and related parts), final drive quarry spec
• Undercarriage: Front idler, idler cushion, track roller, track roller opt-02, track roller quarry spec, carrier roller, track shoe (triple grouser with long hole 500mm and 600mm, quarry spec), track frame, track frame LC quarry, track roller guard
• Work equipment: Boom, boom tunnel spec, boom work lamp and pin, boom hydraulic line, boom clamp, boom lubrication piping, boom tube, boom cylinder, boom cylinder top pin, arm cylinder, arm (2.1M) arm and pin, 2.1M arm additional line, bucket cylinder, bucket link, bucket 0.64M3, bucket 0.53M3, bucket 0.64M3 quarry spec, bucket 0.7M3
• Marks and plates: Mark and plates, plate, oil chart, plate tunnel spec
• Accessories: Tool kit and tool bag
• Service kit: Swing machinery inner parts, shoe bolt and nut service kit, track link assy standard, track link assy quarry, main pump, boom cylinder inner parts, arm cylinder inner parts, bucket cylinder inner parts, swivel joint inner parts, swing motor, travel motor (motor assy and final drive assy), main valve (6-valve with drift preventive), PPC valve, work equipment lever, pilot valve, solenoid valve inner parts
• Numerical index: Full part-number lookup table mapping every part number in the book to its figure number and index position

How the Catalogue Is Laid Out

The Komatsu PC130-7 Spare Parts Catalogue follows the standard figure/list format used throughout the Komatsu parts book range. Each spare part group opens on an even-numbered page with a numbered exploded illustration. The odd-numbered page that follows repeats those index numbers in order, with columns for PART No., DESCRIPTION, Q’TY and SERIAL No. That means a single lookup gives you the part number, the exact name Komatsu uses for the component, how many are fitted to one machine, and – where a part was changed during production – the machine or engine serial number from which the current part applies. Footnote markers next to a part number show interchangeability, supersession, kit-only supply, semi-finished supply, cold-weather specification A and B parts, painted parts, and part groups that are not supplied individually. Engine sections use the engine serial number in the SERIAL No. column; chassis sections use the machine serial number. This is what lets you order the right part on the first attempt instead of guessing between visually similar items that differ only by serial break.

Practical Value of the FEN1607-00-NI01 Catalogue

Because the PC130-7 was built across three distinct serial ranges, the same visual part can hide two or three different part numbers. The Komatsu PC130-7 Spare Parts Catalogue resolves that problem directly on the page: the SERIAL No. column tells you which number applies to your machine, and the interchangeability markers show when an older number has been replaced. For anyone rebuilding a hydraulic main valve, resealing a boom or arm cylinder, replacing a final drive or swing motor, or ordering undercarriage components such as track rollers, carrier rollers, idlers, sprockets or track shoes, having the illustrated breakdown alongside the numbered list removes the back-and-forth with a parts counter. Engine internals – pistons, rings, liners, valve train, cylinder head, camshaft, crankshaft, oil pump, water pump, fuel injection pump and injectors – are all broken down to the individual component, as are the cooling pack, fuel tank, battery and harness routing, operator’s cab, guards, counterweight and the full work equipment group from boom down to bucket teeth and adapters.

Who This Spare Parts Catalogue Is For

This Komatsu PC130-7 Spare Parts Catalogue is written for the people who actually need to identify a Komatsu part: workshop technicians carrying out repairs, parts managers building quotes and stock orders, field service engineers working away from a dealer terminal, and owners of a PC130-7 who want to understand exactly what is on their machine before they order. The figure/list pairing means it works as a reference during disassembly as well as at the ordering desk, and the included service kit sections cover the consumable kits – swing machinery internals, track link assemblies, main pump, boom/arm/bucket cylinder internals, swivel joint, swing motor, travel motor and the 6-valve main valve with drift preventive – that are usually needed as complete sets rather than as individual pieces.

Get the Right Komatsu Part, First Time

IMAGES PREVIEW

The Komatsu PC130-7 Excavator Spare Parts Catalogue gives you the complete illustrated parts breakdown for the machine, with part numbers, descriptions, quantities and serial-number applicability for every figure group from the engine through to the bucket. Correct part identification matters on a machine like the PC130-7 – an incorrect hydraulic or undercarriage part is not just a wasted order, it is downtime on site. With this catalogue open on screen you can locate the component visually, confirm the number against your machine’s serial range, and place the order with confidence. Delivery is instant: the PDF is available for immediate download after checkout, there is no shipping and no waiting, and the file can be opened on a laptop, tablet or phone in the workshop or printed for the parts counter.