Manitou MLT-X 845-120 S5 E3 Genuine Parts Catalogue PDF – MLT 845-120 S5 E3 Spare Parts Manual

Description

Manitou MLT-X 845-120 S5 E3 Genuine Parts Catalogue

This is the full parts catalogue for the Manitou MLT-X 845-120 S5 E3 and MLT 845-120 S5 E3 telehandlers. It is the same style of document a Manitou dealer counter uses to pull a part reference straight off the illustration and match it to the correct machine, and it is laid out for exactly that job: exploded plate, numbered callout, then a table listing each item with its part number, designation and quantity. The catalogue reference carried on the plates is 648616, dated 26/06/2020.

The document is multilingual — French, English, German, Spanish and Italian all appear in the headers, section titles and the ordering instructions — and it runs to just under 900 pages of illustrated assemblies. That depth is why it is worth having as a single PDF: every sub-assembly has its own plate, so a rebuild of a rear axle or a hydraulic valve block does not mean guessing which bolt belongs where.

File Details

• Manual type: Genuine parts catalogue / spare parts manual
• Brand: Manitou
• Models covered: MLT 845-120 S5 E3, MLT-X 845-120 S5 E3
• Catalogue reference on plates: 648616
• Date shown: 26/06/2020
• Languages: French, English, German, Spanish, Italian
• File format: PDF
• Page count: approximately 893 pages

Chapters Covered

The plates are grouped under the same section headings used in the catalogue itself. Every heading below is a real section, with the sub-plates underneath it.

• Targhette / Adhesives — machine data plates, warning decals, model badges, cab conformity plate, sound level sticker
• Filtros y Correas — air filter, fuel filter cartridge, hydraulic filter, transmission oil filter, belts, prefilter
• Adaptación Motor – Transmisión — engine/transmission adaptation, cooling hoses, exhaust piping, air intake, fuel circuit, engine mounts, radiator and fan drive
• Carrocería – Bastidor — engine bonnet, mudguards, counterweight frame, soundproofing
• Electricidad — main cab wiring, drive seat wiring, fuse and relay box, fan wiring, battery cables, lighting and signalling, switches, control valve wiring
• Hidráulico — main circuit, suction circuit, steering circuit, lift circuit, compensation/telescoping circuit, tilt cylinder, lift cylinders, telescoping cylinder, distributor and electrovalves, joystick manipulator
• Conjunto Dirección — front and rear axle steering cylinders, tie rods, steering sensors
• Eje Trasero — rear axle casing, rear differential, rear reduction gear, rear hydraulic brake, rear steering assembly, oscillating support (covering 910271MOD and 283203MOD families)
• Eje Delantero — front axle casing, front differential, front reduction gear, front oil-immersed disc brake, front steering assembly (covering 246848MOD and 910272MOD families)
• Ruedas — wheel and tyre kits, rims, valves, air chambers
• Motor 906379MOD — engine assembly, cylinder block, timing, oil sump, cylinder head, rocker cover, crankshaft and flywheel, pistons and rods, camshaft and rocker gear, fuel circuit, fuel filter, turbocharger, intake and exhaust manifold, engine electrics, starter, alternator, oil pump, combined filter and cooler, engine lubrication, engine cooler, miscellaneous equipment
• Aguión telescópico — boom sections, wear pads and shims, fork carriage
• Cabina — cab structures (271349MOD, 53022361MOD, 271355MOD families), windows and glazing, doors, roof hatch, wipers, heating, air conditioning predisposition
• Transmisión — cardan shafts, gearbox (258800MOD), angle drive (224053MOD), electric control valve
• Opciones – Accesorios — radio, additional battery kit, additional cooling oil kit, hydraulic locking, roof protection grille

What this gives a technician is a direct line from a symptom to a part number. Because every diagram is exploded and every callout is cross-referenced to a line in the table, you can identify a seal, a bearing, a hose or a complete assembly without having the machine torn down in front of you. The plates also carry machine-applicability columns, so where a component changed during production the catalogue tells you which build it belongs to rather than leaving you to work it out from a photograph.

Why a Parts Catalogue Matters for This Machine

On a Manitou telehandler, the same part often exists in several revisions, and the difference between them is small enough that a visual match is not reliable — a shim thickness, a flange pattern, a filter thread. This catalogue resolves that by pairing each illustration with an itemised table naming the exact reference and its remarks. It also groups the rebuild-level detail that matters when a machine is in for a major job: the rear axle section alone breaks down into casing, differential, reduction gear, brake and steering assembly, each on its own plate, with the internal components numbered all the way down to circlips, thrust washers and taper roller bearings.

The engine section follows the same pattern under the 906379MOD identification, from the bare monoblock and cylinder head through to the injection circuit, turbocharger, starter and alternator. If you are re-sealing a cylinder, replacing a wear pad in the boom, chasing a fault in the cab loom or ordering a wheel and tyre kit, the relevant plate exists and the quantities are listed.

How the Catalogue Is Organised

Sections are ordered the way a workshop would work through a machine, not alphabetically. Chassis and bodywork come early, then electrics and lighting, then the hydraulic circuits, then the axles and wheels, then the engine, boom, cab and transmission. Each section carries a numbered plate and a table beneath it listing the item callout, the part number, the designation and the quantity required. Remarks columns flag threads, materials, kit contents and special notes such as shim thicknesses or a part being supplied only on transmission of the machine serial number.

Where a part is superseded or requires the machine serial before supply, the plate notes it directly — the adhesive and prefilter plates in particular carry the note that they are supplied only on communicating the machine serial number. That is the kind of detail that saves a return.

What You Can Do With This PDF

• Identify a part number from the exploded diagram before ordering
• Rebuild a front or rear axle with the correct bearings, shims and seals listed per sub-assembly
• Trace a hydraulic circuit and order the correct hose, tee or adapter
• Replace cab glazing, locks, wipers and door hardware using the correct references
• Check engine component references under 906379MOD for the S5 E3 build
• Match boom wear pads and shim thicknesses to the correct telescopic section
• Confirm which parts are shared between the MLT 845-120 S5 E3 and MLT-X 845-120 S5 E3

Having the whole catalogue rather than a single section means you are not stuck the moment a job spreads from one assembly into another — which, on a machine that shares the chassis, hydraulics and axle families across the S5 E3 range, is most of the time.

IMAGES PREVIEW

Instant PDF Delivery

The file is delivered as a PDF the moment your order completes. There is no shipping, no waiting on a disc, and no paper volume to keep open on the bench. You can open it on a laptop, tablet or phone, search it, and print only the plates you actually need for the job in front of you. If a plate gets covered in oil, print another one.

For anyone maintaining, repairing or rebuilding a Manitou MLT-X 845-120 S5 E3 or MLT 845-120 S5 E3, this is the reference that turns a machine into a list of part numbers.