Komatsu PC200-10M0 Parts Book FENC0064-00 – Complete PDF Parts Catalog for C50001-Up Excavators

Description

The Komatsu PC200-10M0 Parts Book is the complete illustrated parts catalogue for the PC200-10M0 hydraulic excavator, issued by Komatsu under document number FENC0064-00. It applies to machine serial number C50001 and up fitted with the SAA4D107E-1 engine, engine serial number 26739553 and up. Built on the classic Komatsu parts-book layout, the pages pair an exploded-view illustration with a facing parts list that carries the index number, part number, description, quantity, and serial-number range for each item. The result is a single, reliable reference for identifying, cross-checking, ordering, and replacing components on a PC200-10M0 – for the engine, hydraulic system, undercarriage, cab, work equipment, and everything in between.

File Details

• Manual type: Parts Book (illustrated parts catalogue)
• Brand: Komatsu
• Model: PC200-10M0
• Machine serial number: C50001 and up
• Engine: SAA4D107E-1
• Engine serial number: 26739553 and up
• Document number: FENC0064-00
• Language: Multilingual – English, French, Italian, German, Portuguese, Chinese, Russian, Arabic
• Page count: 518 pages
• File format: PDF

Alongside the English body sections, the manual opens with forewords and multilingual introductions in French (AVANT-PROPOS), Italian (PREFÁZIONE), German (VORWORT), Portuguese (INTRODUÇÃO), Chinese, Russian (ПРЕДИСЛОВИЕ) and Arabic (مقدمة), so parts staff in different territories can read the ordering instructions in their own language.

Chapters Covered

• Engine Cylinder Head and its Related Parts
• Engine Cylinder Block and its Related Parts
• Engine Lubrication System
• Engine Fuel System
• Engine Cooling System
• Engine Electrical System
• Engine Accessories and Others
• Engine Marks and Plates
• Field Repair Service Parts
• Engine Related Parts
• Cooling System
• Fuel System
• Electrical System
• Hydraulic System
• Frame and its Related Parts
• Operator’s Compartment and Control System
• Guards and Covers
• Swing Circle and its Related Parts
• Travel System and its Related Parts
• Undercarriage
• Work Equipment
• Marks and Plates
• Auxiliary Parts and Tool
• Other Equipment
• Numerical Index

Engine – Cylinder Head and Cylinder Block

The first two chapters break the SAA4D107E-1 engine down from the top. The cylinder-head section covers the head casting, valve cover, gasket, filler, studs, isolators, thermostat housing, coolant outlet and inlet connectors, plus turbocharger mounting hardware. The cylinder-block section continues with the block, front and rear gear covers, flywheel housing, oil pan, crankshaft assembly, main and thrust bearings, and the gear train. Every fastener, dowel, and O-ring is carried as its own indexed line.

Engine – Lubrication, Fuel, Cooling

The lubrication chapter details the oil cooler, oil filter head, cartridge, oil pump drive, and associated piping. The fuel chapter covers the common rail assembly, injectors, fuel filter, fuel piping, fuel supply pump, and filter bracket. The cooling chapter lists the thermostat, water pump, fan, V-belt, tensioner, and their mounting hardware.

Engine – Electrical, Accessories and Marks

The engine electrical chapter covers the alternator with a full internal-parts breakdown, the starting motor, engine wiring harness, and the relevant brackets and clips. The accessories chapter lists the engine controller, camshaft, common-rail components, and the sensors and switches that feed them. The engine marks-and-plates chapter covers the identification and caution plates fitted to the engine assembly.

Field Repair Service Parts (Engine)

This dedicated chapter supplies undersized main bearings, thrust bearings, connecting-rod bearings, piston kits, and ring sets used when rebuilding the SAA4D107E-1 engine. Shim sets, oversize pistons, and service bushings are all listed by part number.

Cooling System (Machine)

The machine-level cooling chapter covers the radiator assembly, oil cooler, aftercooler, condenser, radiator seals, shroud, net guards, hoses, and mounting brackets. The radiator-seal figure lists every sheet and plate that seals the cooling stack against the revolving frame.

Fuel System (Machine)

This chapter covers the fuel tank, fuel-supply piping, fuel prefilter, water separator, additional fuel prefilter (for biodiesel B20 and B30 configurations), fuel-filter bracket, clip sets, and remote drain. Standard and biodiesel-compatible tank variants are both shown.

Electrical System (Machine)

One of the largest chapters in the book. It covers the battery and mounting, starting wiring harness, engine wiring harness, wiring-harness mounting (both halves), working lamps (front and additional), beacon lamp, horn, travel alarm, rearview camera, and the full complement of clips, bands, and brackets.

Hydraulic System

The hydraulic chapters open with the hydraulic tank, breather, bypass valve, and both the 6-spool and 7-spool control-valve variants, each exploded across many sub-pages with mounting brackets and connecting parts. Suction, delivery, oil-cooler, return, drain, travel, swing, LS, arm-and-bucket, attachment, and pressure-switch-block piping each get their own figure. Solenoid valve assemblies and their related piping, mounting, and pressure switch block follow in dedicated sections.

Frame and its Related Parts

A short but important chapter covering the revolving frame, boom foot pin, spacers, and mounting plates – the anchor for the operator’s compartment and most of the machine’s hydraulic and electrical hardware.

Operator’s Compartment and Control System

The largest single section of the book. It documents the operator’s seat and every sub-kit (upper, seat cover, foam, frame, headrest, cable, handle, latch, riser, suspension, damper, bearing, tether belt, weight adjuster, adapter), seat belt, floor mat, sunvisor, air-conditioner compressor and mounting, air-conditioner piping, V-belt, cab body and windows, front window, front lower window, roof ventilator, door, door lock, open lock and door catch, wiper and room lamp, rubber antenna, speaker and window washer, roof cover, grip, gateway-function-controller antennas (GPRS and IRIDIUM), KOMATSU emblem, cab interior parts, monitor cover, washer-hose mounting, luggage plate and cigarette lighter, air ducts and fresh-air filter, partition and recirculation air filter, pump controller and relay, air-conditioner controller, main wiring-harness clamps, rear cover with 12V converter, controller and monitor, floor frame, PPC valves (travel, attachment, and both work-equipment sides), travel control lever, footrests, floor base, wiring harness and clamps, window-washer hose, work-equipment control levers (L.H. and R.H.), PPC-valve mountings, consoles, armrests, air-conditioner unit (three sub-sections), air-conditioner mounting and piping, PPC-valve piping for travel and work equipment, piping mountings, P.T. block, and the floor seals and mounting hardware.

Guards and Covers

Covers the engine hood, frame, L.H. and R.H. doors, partitions (with and without pre-cleaner), partition cover, upper cover, right side case, floor cover (standard and with refueling pump), handrail, rearview mirrors (L.H. and R.H.), rear under-view mirror, counterweight and counterweight mounting, plus the under-cover sections in both halves.

Swing Circle and its Related Parts

The swing chapter covers the swing circle itself (with seal and grease fitting), the swing machinery and motor including a detailed three-part internal breakdown of the swing motor, swing motor mounting, and swing drain piping.

Travel System and its Related Parts

Covers travel piping, the travel motor and final drive on both L.H. and R.H. sides (each split across two internal views), the final-drive internals for both sides, and the travel-motor covers.

Undercarriage

Fully illustrated. Covers the front idler and idler cushion (yoke, cylinder, spring, seals, bushings, valve), track rollers, carrier rollers, track-shoe assemblies in 600 mm, 790 mm, and 800 mm triple-grouser grease-sealed widths, track frame, track-frame under-covers, track-roller guards, and every associated bolt, nut, and washer.

Work Equipment

Covers the boom, boom top and bottom pins, boom arm-cylinder piping, boom bucket-cylinder piping, boom lubrication piping, boom additional piping, boom attachment plug, boom working lamp, boom cylinders (L.H. and R.H. internal views), boom cylinder head pin, arm cylinder, arm with pin, arm bucket cylinder, bucket link, bucket-cylinder hose, arm additional piping, shipping parts, and bucket assemblies in both 0.93 m³ and 1.00 m³ variants with teeth, side cutters, shims, and lifting hooks.

Marks and Plates, Tools, Other Equipment, Numerical Index

The marks-and-plates chapter lists every decal, warning plate, KOMATSU logo, ROPS plate, lubrication chart, and caution plate on the machine. The auxiliary-parts-and-tool chapter lists the tool bag and its contents. The other-equipment chapter covers the preventive-maintenance service connectors, refueling pump, and vandalism-protection guard. Finally, the numerical index lets you search the entire book by part number in a single pass.

Why This PC200-10M0 Parts Book Belongs on Your Bench

Ordering the wrong part wastes time and money. The PC200-10M0 parts book removes the guesswork by tying each part number to a specific serial-number range, so you can order with confidence on early and later production machines alike. The illustrations are detailed enough to identify a single O-ring, shim, or retaining ring inside an assembly, and the indexed parts lists carry the exact Komatsu part number you need. Whether you are running a fleet, a repair shop, or a single machine in the field, you get the complete catalogue – engine, hydraulic control valve, swing motor, travel motor, final drive, undercarriage, cab and work equipment – in one file.

IMAGES PREVIEW

The book is delivered as an instant-download PDF. No shipping, no waiting, no regional restriction. Open it on a laptop, tablet or phone, print the pages you need for the workshop floor, and keep the file as your permanent reference. The download link is available immediately after payment.