Komatsu PC200-8 PC200LC-8 Parts Book PDF Download – B30001 and Up

Description

Komatsu PC200-8 & PC200LC-8 Parts Book – Complete Illustrated Parts Catalog

This is the full Komatsu PC200-8 / PC200LC-8 Parts Book covering machine serial number B30001 and up with engine serial number 30919040 and up. The catalog runs to 443 pages and provides exploded-view illustrations with indexed part numbers for every major assembly on the machine. If you own, service or rebuild a PC200-8 or PC200LC-8 excavator, this parts book is the reference you need to identify and order the correct components.

File Details

• Manual Type: Parts Book (illustrated parts catalog)
• Brand: Komatsu
• Models: PC200-8, PC200LC-8
• Engine: SAA6D107E-1B-W
• Machine Serial No.: B30001 and up
• Engine Serial No.: 30919040 and up
• Language: English (with Portuguese and Spanish introduction pages)
• Page Count: 443
• File Format: PDF

Chapters Covered

• Air Transfer Connection
• Spare Parts
• Air Cleaner (Pre-Cleaner Spec. or Dust Proof Spec.)
• Engine Related Parts
• Cooling System
• Fuel Tank and Related Parts
• Electrical System
• Hydraulic System
• Main Frame and Related Parts
• Operator’s Compartment and Control System
• Guard
• Swing Circle and Related Parts
• Travel and Lower Piping
• Under Carriage
• Work Equipment
• Marks and Plates
• Accessory
• Miscellaneous
• Service Kit and Component Parts
• Numerical Index

Engine Related Parts

Detailed exploded views and part listings for the SAA6D107E-1B-W engine installation. Covers the damper, filter remote piping and main pump connection, heat shield, exhaust muffler and mounting bracket, oil pan drain, cooling fan, alternator (60A), starting motor (5.5KW), fuel pre-filter, corrosion resistor and engine mount. Each assembly shows individual part numbers with quantities and serial number applicability.

Cooling System

Complete breakdown of the radiator assembly, oil cooler, shroud and after cooler, fuel cooler and condenser (with air conditioner), fan guard and after cooler piping. Includes the cooling system for the hydraulic oil cooler and all related hoses, clamps and mounting hardware.

Electrical System

Battery (wet) installation, starting harness, main harness (split across two sections), engine side wiring, battery case side wiring, additional work lamp, additional rear work lamp, horn and travel alarm. Also includes the alternator and starting motor inner parts diagrams.

Hydraulic System

One of the largest sections in the book. Covers the hydraulic oil tank for 1-actuator machines, main control valve (connecting parts split across two sections, plus valve bracket and sensor), main pump for 1-actuator, suction line, delivery line, oil cooler lines, return line, return line for 1-actuator, drain lines, boom line, arm and bucket line with arm holding valve, arm drift preventive, attachment lines (main, return and pilot filter for 1-actuator), travel line, swing lines, LS lines (standard and 1-actuator), solenoid valve circuit (solenoid valve and solenoid valve piping for 1-actuator), and pressure switch block.

Main Frame and Related Parts

Revolving frame assembly and boom foot pin (100 hours greasing type). Includes the structural components that form the base of the upper structure.

Operator’s Compartment and Control System

Extensive coverage of the operator’s cab and controls. Operator’s seat (suspension type and rigid type), seat belt (50mm and 78mm wide), top guard, front guard, half guard, front full guard, floor mat (standard and for 1-actuator), window washer, air conditioner, heater, and the complete operator’s cab breakdown including cab and window, front window, front lower window, roof ventilator, door, door lock, open lock and door catch, wiper and room lamp, speaker and window washer, roof cover and air intake, pressure valve and grip, Komtrax film antenna and Galeo plate, cab in parts (monitor and cover, monitor cover, luggage plate, monitor duct, air duct, partition and filter, sub plate and relay, air conditioner and Komtrax controller, air conditioner controller, main harness clamp, rear cover), floor frame, travel control, foot rest left and right, 1st attachment control, base, harness, harness clamp and earth, window washer hose, lever left and right, valve left and right (including heatproof versions), console left and right, PPC lock lever and radio, arm rest left and right, air conditioner unit, air conditioner hose, heater hose, PPC piping for travel valve, PPC piping for pilot valve (including additional piping), PPC hose clamp, P.T. block and seal (standard and 1-actuator), rear camera cable, floor mounts and mode selection connectors.

Guard Section

Hood, machine cab frame (standard and with pre-cleaner), side cover left-hand and right-hand, partitions (left side with air conditioner, left side with corrosion resistor and air conditioner, middle with air conditioner, valve and muffler side with air conditioner), machine cab cover (including cover and pre-cleaner versions), battery case, handrail, rear view mirrors left and right, counterweight (3730KG), counterweight mounting and under cover with water separator.

Swing Circle and Related Parts

Swing circle assembly, swing machinery (motor and machinery), swing machinery gauge and drain piping, and swivel joint. Essential for anyone servicing the swing system.

Travel and Lower Piping

Travel piping for both PC200-8 and PC200LC-8, and final drive assemblies for both models. Includes all hoses, tubes, flanges and fittings that make up the travel circuit.

Under Carriage

Comprehensive undercarriage coverage: front idler, idler and cushion (idler cushion for PC200-8 and PC200LC-8), track roller for both models, carrier roller for both models, track shoe (swamp type 860mm wide, triple grouser with hole in 600mm, 700mm and 800mm widths for both models), track frame with full roller guard for both models, under cover for track frame, track roller guard for both models, and full roller guard for both models.

Work Equipment

Detailed parts breakdown for the front attachment. Boom (5.7M boom 100 hours greasing type and 5.7M boom 1ATT for PC200LC-8), boom top pin and arm cylinder bottom pin, boom arm and bucket cylinder lines, boom lubricating line and harness, boom attachment plug, boom additional lines, boom lubricating line and working lamp (including seal less version), boom cylinder (100 hours greasing type), boom cylinder head pin, arm cylinder (100 hours greasing type), arm (2.9M heavy duty, 2.9M for 1-actuator, 2.4M for PC200-8 and PC200LC-8, 2.4M for 1-actuator for both models, 1.8M), arm bucket link (standard and for 1.8M and 2.4M arm), arm bucket cylinder hose and spacer (for 2.9M arm), arm bucket cylinder hose for 1-actuator (2.9M arm), arm bucket cylinder hose for 2.4M arm, arm additional piping for 1-actuator (2.9M arm and 1.8M arm), parts for less bucket, bucket 0.8M3 913MM horizontal pin type strengthened with hook, bucket 1.0M3 1071MM horizontal pin type with hook, bucket 1.2M3 1228MM horizontal pin type with hook, bucket hook, breaker adapter for Atlas and Okada, breaker adapter accumulator related parts for Krupp, breaker adapter for Nippon Pneumatic, and breaker adapter adapter parts.

Marks and Plates

Mark and name plates in English for both PC200-8 and PC200LC-8, lubrication chart (100 hours greasing type), caution plate for cab windshield lock operation (English lettering type), Komatsu logo for boom and counter weight, caution plate for arm, caution plates for top guard and front guard in Portuguese, service instruction for air cleaner in Spanish, and caution plates for 1-accumulator and 2-accumulator.

Accessory and Miscellaneous

Spare parts kit, tool kit including wrenches, sockets, grease pump and tool bag, blind parts for bucket, and the complete numerical index for quick part number lookup.

Service Kit and Component Parts

Dedicated section for service kits and component parts: swing machinery assembly for supply, shoe bolt and nut service kit, track link assembly 90 set supply parts, air cleaner inner parts (two versions), fuel self charge pump inner parts, rubber antenna, operator’s seat assembly (standard, suspension and PVC leather), main pump breakdown across 11 pages, boom cylinder left and right, arm cylinder, arm cylinder 1.8M, bucket cylinder, swivel joint, swing motor across 3 pages, travel motor across 2 pages, main valve for 1-actuator across 21 pages, service valve for 1-actuator across 3 pages, PPC valve for travel across 2 pages, PPC valve for work equipment (standard and heatproof), PPC valve for 1-attachment, safety valve in various pressure ratings (175, 210, 250, 280 KG/CM2 and 280/175, 280/210, 280/250 KG/CM2), lock valve, selector valve, filter inner parts, solenoid valve inner parts, valve for accumulator, and air conditioner unit.

Why This Parts Book Matters

Ordering the wrong part for a Komatsu PC200-8 or PC200LC-8 is an expensive mistake. This parts book eliminates the guesswork by showing you exactly how every assembly goes together and giving you the precise part number for each component. The exploded-view illustrations are indexed to the parts lists, so you can visually identify the part you need and match it to the correct number before you call your dealer or place an online order.

The serial number coverage is clearly marked throughout. Machine serial B30001 and up and engine serial 30919040 and up are printed on every applicable page, so you know the part numbers apply to your machine. This is especially important on Komatsu equipment where running changes occur across serial ranges.

IMAGES PREVIEW

Instant PDF Delivery – No Shipping, No Waiting

This Komatsu PC200-8 PC200LC-8 Parts Book is delivered as a PDF file immediately after payment. There is no physical book to ship, no waiting for delivery and no shipping cost. The file works on any device that can display a PDF – desktop computer, laptop, tablet or smartphone. You can print individual pages for use in the workshop, zoom in on exploded views for detail, and search the numerical index when you already know the part number you need.

Whether you are a Komatsu owner performing routine maintenance, a mechanic rebuilding a hydraulic cylinder, or a parts professional sourcing components for a customer, having the complete illustrated parts catalog for the PC200-8 and PC200LC-8 on hand saves time and prevents ordering errors. The 443-page PDF covers every major system on the machine and gives you the same parts information used to build and service these excavators.