Komatsu PC200-8M0 PC200LC-8M0 PC210-8M0 PC210LC-8M0 Parts Book YCPB201701

Description

Komatsu PC200-8M0, PC200LC-8M0, PC210-8M0 and PC210LC-8M0 Parts Book — YCPB201701

This is the complete parts catalog for the Komatsu PC200-8M0, PC200LC-8M0, PC210-8M0 and PC210LC-8M0 hydraulic excavators (track type). Published under document number YCPB201701, it indexes every serviceable component on these four machines by figure, index number, part number, description, quantity and applicable serial number, with a matching exploded-view illustration for each figure. Whether you are rebuilding an engine, chasing a hydraulic leak, replacing undercarriage parts or simply ordering fasteners, this Komatsu PC200-8M0 parts book gives you the exact part number before you call your distributor.

File Details

• Manual type: Illustrated Parts Book / Parts Catalog
• Brand: Komatsu
• Models covered: PC200-8M0, PC200LC-8M0, PC210-8M0, PC210LC-8M0
• Applicable serial numbers: PC200-8M0 DBBB2001 and up; PC200LC-8M0 DBBD0401 and up; PC210-8M0 DBBE1501 and up; PC210LC-8M0 DBBF4001 and up
• Document number: YCPB201701
• Language: English / Chinese (multilingual foreword)
• Format: PDF
• Pages: approximately 590

How the Parts Book Is Organised

Every assembly in this Komatsu excavator parts catalog opens with a figure number (FIG.) and an exploded illustration. Each individual part on the illustration carries an index number that keys directly into the parts list on the facing page. The parts list gives, in index order, the part number, description, quantity required per machine and the serial number range in which each part applies — so you can confirm a part fits your specific PC200-8M0 or PC210LC-8M0 before ordering.

Assembly relationships are shown in the description column with dot prefixes (for example: Tank Assembly — .Tank — ..Cap — …Packing), so you can see at a glance whether a part is supplied individually or only as part of a sub-assembly. Interchange, discontinued-part and supersession codes (A1, A2, A3, A4, B1, B2, C1, C2, C3) are explained in the foreword and applied throughout the lists.

Chapters Covered

• Engine — lifting brackets, cylinder head, cylinder head cover, air intake port cover, air intake connectors, air intake heater, air cleaner, pre-cleaner, air transfer connection, exhaust manifold, turbocharger, turbocharger oil piping, exhaust muffler and piping, heat shields, dust seal, rocker arm, accessory drive pulley, flywheel housing, flywheel and mounting, engine oil pan and drain, oil level sensor, cylinder block, crankshaft, vibration damper, piston and connecting rod, oil filler, oil level gauge, rear gear housing, oil filter and piping, oil pump, oil cooler, fuel pre-filter, fuel filter and piping, fuel injection pump, fuel injection controller, fuel injector, fuel piping, water separator, cooling fan and drive pulley, fan belt and tensioner, water pump, water outlet and inlet connectors, thermostat, wiring harness cap, alternator mounting, alternator (35A, 35A sealed, 60A), starting motor mounting and motor (4.5 kW, 5.5 kW), starting motor relay, engine wiring harness
• Cooling System — radiator, oil cooler, aftercooler and shroud, fuel cooler and condenser, aftercooler piping, fan guard
• Fuel System — fuel tank, fuel supply piping, remote drain and fuel main filter related parts
• Electrical System — battery and large-capacity battery, wiring harnesses (starting, main, disconnect switch), additional working lamps, rear working lamp, beacon lamp, horn, travel alarm, rearview camera fixture
• Hydraulic System — hydraulic tank, main control valve (inner parts and connecting parts), slow return valve, main piston pump, suction piping, delivery piping, oil cooler piping, return and drain piping, boom piping, arm and bucket piping, arm hydraulic drift prevention valve, actuator piping, travel piping, swing piping, LS piping, solenoid valve, pressure switch block, PPC valve piping
• Frame and Related Parts — revolving frame (with and without deck guard), boom foot pin
• Operator’s Compartment and Control System — operator’s seat (rigid and suspension types), seat belts, head guard, front guards (half guard, full guard LV1, full guard LV2), floor mat, rain visor, sun visor, window washer, air conditioner, fire extinguisher, cab body and windows, cab door and lock, cab open lock and door catch, cab wiper and room lamp, cab inner parts, cab roof cover and air intake, cab grips, KOMTRAX antenna, monitor and covers, air ducts and fresh-air filter, partition and recirculation air filter, air conditioner controller, main wiring harness clamps, rear cover, floor frames, PPC valve for travel, travel control lever, footrests, first attachment control, floor bases for Grammer and KAB seats, floor wiring harness, work equipment control levers, PPC valves for work equipment (L.H. / R.H.), consoles, armrests, air conditioner unit, air conditioner motor, air conditioner piping, heater hose, PPC piping for travel valve and pilot valve, P/T blocks, floor seals, switch
• Guards and Covers — hood, machine cab frame, door L.H., door R.H., partition (window washer tank), partition cover, partition valve and muffler side, partition air conditioner variations, upper cover, machine cab cover with pre-cleaner, battery case, handrail, rearview mirrors (L.H., R.H.), counterweight and mounting, under cover (standard and strengthened type)
• Swing Circle and Related Parts — swing circle, swing machinery (motor inner parts, mounting, drain piping, supply only), swivel joint (inner parts and connecting parts)
• Travel System — travel piping (track frame and long track frame), final drive (inner parts, travel motor, final drive)
• Undercarriage — front idler and idler cushion, track roller (standard and long track frame), carrier roller, track shoe assemblies (600 mm, 700 mm, 800 mm width, with and without holes, grease sealed type, city pad), track link assemblies (90-set and 98-set type), track frame and long track frame (with and without under cover), track frame under cover, track roller guards (single, full length and long track frame)
• Work Equipment — boom (5.7 m strengthened type: boom and bushing, top pin and bottom pin, arm cylinder piping, bucket cylinder piping, lubrication piping, attachment plug, working lamp, additional piping), boom cylinder L.H. and R.H., boom cylinder fitting, boom cylinder head pin, arm cylinder, parts for less arm, arms (2.9 m standard, 2.9 m reinforced, 2.4 m, with inner parts, bucket cylinder, bucket link, bucket cylinder hose and additional piping), parts for less bucket, buckets (0.8 m3, 0.94 m3, 1.0 m3, 1.06 m3, horizontal pin type, for rock, reinforced arm), breaker adapters (ATLAS, OKADA, MATSUDA, FURUKAWA, KRUPP)
• Marks and Plates — marks and name plates (Chinese and English), lubrication chart, caution plates, KOMATSU logos, coolant decals, KOMTRAX plate, battery disconnect switch plate
• Auxiliary Parts and Tool — spare parts, spare parts for sandy and dusty terrain, cap and overall, tool kit
• Other Equipment — additional track frame step
• Field Repair Service Parts — repair service parts and service kits (shoe bolt and nut kit, boom cylinder kit, hydraulic cylinder seal kits K02, K03, K04)

In total, the catalog covers the full scope of the machine — from the engine and cooling pack through the hydraulic and electrical systems, the operator platform and cab, the guards, the swing and travel drive, the undercarriage and the entire work equipment including buckets and breaker adapters. Each of those areas is broken down into individual figures so that every nut, bolt, seal, hose, pump, valve, cylinder, gear, roller, shoe and plate is accounted for and cross-referenced to its part number. For anyone maintaining a fleet of PC200-8M0, PC200LC-8M0, PC210-8M0 or PC210LC-8M0 machines, this is the single reference document that turns a request for the seal on the end of the arm cylinder into an exact Komatsu part number.

Serial Number Coverage

Because Komatsu updates parts throughout production, this parts book carries serial-number applicability against each part. The four machines covered begin at these serials:

• PC200-8M0 — DBBB2001 and up
• PC200LC-8M0 — DBBD0401 and up
• PC210-8M0 — DBBE1501 and up
• PC210LC-8M0 — DBBF4001 and up

Where a part applies only to a specific serial range, that range is printed in the serial number column of the parts list. This is the detail that prevents ordering a part that visually matches but physically does not fit your machine.

Who This Komatsu Parts Book Is For

Independent workshops, fleet maintenance teams, parts departments and owner-operators running these 20-tonne class excavators. If you are ordering through a Komatsu distributor, the part number, quantity and machine serial number from this book are exactly what the counter needs. If you are sourcing aftermarket or used parts, the same reference lets you compare a supplier’s offering against the genuine Komatsu number and description.

What You Get and How You Get It

IMAGES PREVIEW

The Komatsu PC200-8M0 PC200LC-8M0 PC210-8M0 PC210LC-8M0 Parts Book YCPB201701 is delivered as an instant-download PDF. No shipping, no waiting on a courier, no risk of a lost binder. Download it once and it is yours — open it on a laptop in the workshop office, on a tablet next to the machine, or print the figures you need and take them into the pit. Use it to identify the correct part number, confirm the quantity required, check interchange and supersession notes and quote your distributor with confidence. For anyone responsible for keeping a PC200-8M0 or PC210LC-8M0 working, having the genuine parts reference at your fingertips is the difference between a fast, correct repair and a week of guesswork.