Linde E20 E25 E30 E35 Forklift Spare Parts List 3878010001 PDF

Description

Linde E20 E25 E30 E35 Spare Parts List – Document 387 801 00 01

This is the illustrated spare parts list for the Linde E20, E25, E30 and E35 electric counterbalance forklift trucks. It is organised as ten numbered registers, each covering one assembly group of the truck, and every register is broken down into exploded illustrations with numbered callouts that tie directly to a parts table listing the position number, part number, description, quantity and any replacement or supersession note. The document is dated 30.09.2014 and carries the print number 387 801 00 01.

Because it is arranged as a register system rather than as a running service narrative, the Linde E20 E25 E30 E35 spare parts list works as a counter reference and a workshop reference at the same time: you identify the assembly, find the position number on the drawing, then read across to the part number, quantity and any restricted-availability or phase-out flag for that item.

File Details

• Manual type: Illustrated spare parts list / parts catalogue
• Brand: Linde
• Models covered: E20, E25, E30, E35 plus the H-600, L and HL-600 variants
• Language: English
• File format: PDF
• Print / document number: 387 801 00 01
• Date on document: 30.09.2014

Registers Covered

• Register 01 – Motor Unit (motor unit assembly, axle housing, traction motor, rotor assembly, bearings, sealing rings, sensors, repair kits)
• Register 02 – Drive: Transmission
  • Axle drive kit AE30/AE35-20
  • Axle driven gear GR3E-20 and GR3,5E-20
  • Service units, planet gear carriers, brake pistons, annular gears and locking rings
• Register 03 – Chassis Unit
  • Chassis, overhead guard and counterweight
  • Chassis and counterweight – raised driver’s seat version
  • Battery door low truck and high truck, battery cover
  • Front coating, side coating right, cowlings and covers, panelling
  • Front console and cooling system
  • Driver seat and air-suspended driver seat, rotating seat mechanism
  • Driver cab windscreen, roof pane, rear window, sliding window, doors and safety door
  • Washer system and mounting aid, rear-view mirror, heater and radio
• Register 04 – Steering and Wheels
  • Steering axle
  • Hydrostatic steering with lines
  • Wheels and tyres
• Register 05 – Controls
  • Pedal operation
  • Brake valve
  • Actuator of pilot valve
  • Armrest harness
  • Tilt angle sensor
• Register 06 – Electric Equipment
  • Electric armatures and power modules with battery accessories
  • Battery plug Schaltbau
  • Traction and lift electronic, both the pre-02/2014 and 03/2014 onward versions
  • Main harness parts 1, 2 and 3, and the corresponding 03/2014 onward versions
  • Various cable looms parts 1 and 2
  • Working light and wiring harnesses for working lamps
  • Truck lighting and warning blinker system, wiring harnesses for lighting and lighting height up
  • Flash light, warning lights, danger signal and Blue Spot
  • Wiring harnesses for warning functions, windscreen wiper and heater
  • Voltage converter for special equipment
  • Linde Forklift Data Management (LFM), LFM Online and LFM cable harnesses
  • 12V socket and charger battery
  • Lift mast positioning and wiring harnesses for battery reach
  • Height indicators for St, Du and Tr variants of mast types 1514, 1515, 1522 and 1523
  • Linde Safety Pilot (LSP) and LSP wiring harnesses
• Register 07 – Hydraulic Unit
  • Control valve and lines, types 1514/1515 and 1522/1523
  • Control block VW10-M3 and VW10-M4 (BR 387)
  • Hydraulic pump, oil tank, filter and lines
  • Pump aggregate and electric motor
  • Tilt cylinder
  • Additional hydraulic hose lines in the vehicle, including the raised driver’s seat version
  • Auxiliary hydraulic services and auxiliary hydraulics for standard, duplex and triplex masts on types 1514, 1515, 1522 and 1523
• Register 08 – Lift Mast
  • Fork carriage and fork arms for mast types 1514, 1515, 1522 and 1523
  • Standard, duplex and triplex mast assemblies for each mast type
  • Lift cylinders, middle cylinders and external cylinders
  • Integrated sideshift for standard, duplex and triplex masts with roller guide
  • Fork adjusting devices for standard, duplex and triplex masts
• Register 09 – Special Equipment
  • Highway equipment and load backrest for masts 1514 and 1515
  • Tilt cylinder protection and overhead guard grille
  • Terminal board and sun blinds
  • Battery carrier and battery removal tool
  • Hydraulic battery reach, parts 1 and 2
• Register 10 – Miscellaneous
  • Plates
  • Plates for joystick – single lever
  • Plates for joystick – cross lever
  • Operating material
  • Bag for technical documentation

Taken as a whole, the document gives a parts counter or workshop the complete breakdown of the truck from the motor unit through the transmission, chassis and cab, steering axle, pedal and pilot-valve controls, the full electric equipment register including every harness family, the hydraulic unit with its control blocks, pump, tank and tilt cylinder, all four lift mast families with their cylinders, sideshifts and fork positioners, and the special equipment register. Each register is self-contained, so you can jump straight to the assembly you are working on without reading the rest of the catalogue.

How the Part-Number Key Works

The back of the document carries an alphabetical part-number key for the E20/25/30/35 range. Part numbers are listed in ascending order with the page reference beside each one, so if you already hold a part number – from a label, an old invoice or a dealer quote – you can find the exact illustration page it belongs to in a single step instead of working through the registers. Items marked as innovations are flagged, and the key covers the higher-numbered ranges including the 387, 390, 5170, 5172, 5176, 5178, 680, 859, 9 008, 9 045, 9 292, 9 495 and 7 9125 series that appear throughout the register pages.

The front of the document also explains the availability codes used in the parts tables, so you can read a listing and know immediately whether an item is supplied only in minimum packaged quantities, is held as restricted availability and ordered on request, is in the process of being phased out and replaced by a new part, or simply is not available individually because of how the assembly is produced. That single page of codes saves a lot of guesswork when you are ordering.

What You Can Do With This Parts List

This Linde E20 E25 E30 E35 spare parts list is built for the person who has to put the right number on an order form. You can trace a leaking tilt cylinder back to its individual seals, piston rod, cylinder head or eye bolt; identify which leaf chain length suits a specific lift height; find the correct support roller, shim ring and locking ring combination for a fork carriage; or work out which harness and connector family sits behind a fault in the lighting, wiper or warning system on a pre-2014 or post-2014 machine.

For transmission and axle work, the register 02 pages break the axle drive kit and axle driven gear assemblies down to bearings, rings, planet wheels, sun gear shafts, brake pistons and annular gears, including the optional locking ring sizes that are called out as alternatives. For hydraulic work, register 07 covers the control valve and lines for both the 1514/1515 and the 1522/1523 mast generations, the VW10-M3 and VW10-M4 control blocks, the gear pump, oil tank, filter housing, accumulator and the full hose line schedule for auxiliary services across standard, duplex and triplex masts at a wide spread of lift heights.

On the mast side, registers 08/01 through 08/52 cover fork carriages and fork arms, standard, duplex and triplex mast assemblies, lift, middle and external cylinders, integrated sideshifts and fork adjusting devices for all four mast families. Quantities, position numbers and variant notes are given for each row, so the same drawing tells you how many of a fastener or seal you actually need and whether a part applies to a 2-2.5 t or a 2.5-3.5 t truck.

Why the Right Number Matters

Electric counterbalance trucks of this generation share a great deal of hardware across the E20 to E35 range, but not all of it. Rollers, locking rings, chains and hose lines change with lift height, mast type and truck variant, and the cab and chassis registers split between low truck, high truck, H-600, L and HL-600 versions. Ordering from a generic listing rather than from the actual illustrated register is how you end up with a part that fits the drawing but not the machine on the floor. Working from the register pages and the part-number key removes that risk.

IMAGES PREVIEW

Instant PDF Download

The Linde E20 E25 E30 E35 spare parts list is delivered as a PDF download, available immediately after checkout. There is nothing to ship and nothing to wait for. Open it on a laptop or tablet in the workshop, zoom into the exploded views, print the register pages you need for the job and take them to the truck, or keep the part-number key open on a phone while you are standing at the counter. Because the whole catalogue lives in one file, searching and navigating between registers stays quick whether you are chasing a single seal or rebuilding a complete mast section.