Linde H12 H16 H18 H20-03 Spare Parts List – PDF Parts Catalogue

Description

Linde H12 H16 H18 H20-03 Spare Parts List — Complete 419-Page PDF Parts Catalogue

Every seal, hose, bracket, casting, bolt and electrical connector on a Linde H12-03, H16-03, H18-03 or H20-03 lift truck is represented in this Linde H12 H16 H18 H20-03 spare parts list. Published by LINDE AG, Werksgruppe Flurforderzeuge und Hydraulik, Aschaffenburg under document number 350 804 94 01 — the 09.03 edition with print date 04.09.2003 — the 419-page catalogue is the reference used when a component has to be identified and ordered. Ten registers split the truck into its major systems, and each system is broken into illustrated assembly diagrams keyed to numbered part tables, so any component can be traced back to its Linde part number in a single look-up.

File Details

• Manual type: Illustrated spare parts list / parts catalogue
• Brand: Linde (LINDE AG, Werksgruppe Flurforderzeuge und Hydraulik)
• Models covered: H12-03, H16-03, H18-03, H20-03 (with H20-600C references)
• Document number: 350 804 94 01
• Edition / print date: 09.03 — print no. 350 804 94 01, dated 04.09.2003
• Language: English
• Page count: 419 pages
• File format: PDF

Chapters Covered

• Register 01 — Power Unit: Engine / Motor (oil filter, air supply and air filter, engine suspension, cooling system, diesel fuel system, exhaust system, LPG system, LPG system with catalyzer governor, LPG tank variants for France, Brazil, Australia and Great Britain, volumetric filling, dust-guard preliminary filter installation, particle filter system)
• Register 02 — Drive Transmission (centre piece AH20-01, axle driven gear GR2H-01, service unit AH20-01, power unit and housing, port plate housing and valves, remote control E2 4–16 bar)
• Register 03 — Chassis, Bodywork and Fittings (chassis, overhead guard and counterweight; hood and coverings; damping mats; driver’s seat; driver’s seat container version; driver’s cab; heater)
• Register 04 — Steering and Wheels (hydrostatic steering with lines, steering axle, wheels and tyres)
• Register 05 — Controls (speed control diesel engine, speed control LP gas version, travel and brake operation, actuator of pilot valve)
• Register 06 — Electric Equipment (electric armatures and battery, main cable looms for diesel, LPG and catalyzer-governed LPG, set cable, spot light, truck lighting with warning blinker and danger signal, flash light and warning lights, vehicle lighting Japan version, cable trees for lighting, harnesses for particle filter and for flash lights / console / light warning)
• Register 07 — Hydraulic Unit (control valve and lines, oil tank with lines and accessories, oil filter and lines for hydraulic travel system, tilt cylinder)
• Register 08 — Mast Assembly and Auxiliary Hydraulic (standard, duplex and triplex mast type 180 with fork carriage and fork arms; lift cylinder for mast lift type 180; auxiliary hydraulics for standard, duplex and triplex masts; sideshifters for standard, duplex and triplex masts)
• Register 09 — Special Equipment (highway equipment, loadguard for mast type 180)
• Register 10 — Miscellaneous (plates, operating material)

Read end to end, the ten registers describe the whole machine: the power unit on both diesel and LPG trucks, the hydrostatic drive transmission, the chassis and bodywork with its seats, cab and heater, the steering axle and wheel assemblies, the pedals and pilot-valve actuator, the complete electrical installation including every loom variant, the hydraulic unit and tilt cylinders, the mast sections with their lift cylinders and attachments, and the special-equipment items such as highway equipment and loadguards. Each register is further broken down by assembly, so a search for, say, the tilt cylinder does not drag you through the entire hydraulic chapter — the tilt cylinder has its own page with numbered rod, piston, seal kit and cylinder-head components listed against their Linde part numbers.

How the Part Number Index Works

At the front of the catalogue is a key to part numbers. It lists each Linde part number alongside the register and page reference where that part appears, so if you already have a part number in hand, you can jump straight to the illustration that shows it. The same pages carry the availability index used throughout the tables:

• A part shown with no index number is on short delivery.
• Index 1 — packaged quantities: small parts and sealing materials available on short delivery, but only in specified minimum pack sizes.
• Index 2 — restricted availability: the part is not stocked and is only procured after the customer order is received, so delivery may take longer.
• Index 3 — parts being phased out: being replaced by new parts due to technical modifications, and no longer available once current stocks run out.
• Index 4 — not available individually: the part cannot be ordered on its own because it is fitted as part of a larger assembly in production.

Knowing those codes in advance is the difference between an order that ships and an order that comes back, which is exactly why working from the original catalogue matters.

Truck Versions and Change-Over Identifiers

The catalogue is written to work across the whole -03 series, which is why you will see version-specific parts separated by change-over identifiers such as H2X350L02565, H2X350L02566, H2X180L08640, H2X180L08641, H2X350N03290 and H2X350N03291 in the tables. These markers tell you which parts fit trucks built before or after a particular production change — useful when a component has been superseded mid-series, or when a mast, sideshifter or particle-filter system has been updated. Reading the applicable identifier against your truck before ordering is the simplest way to avoid a mismatch.

What the Linde H12 H16 H18 H20-03 Parts List Enables

With this catalogue on hand you can identify the exact part number for any component on the H12-03, H16-03, H18-03 or H20-03 lift truck — engine service items such as oil filters and air filter cartridges, cooling-system hoses, fuel-system and LPG components including tank variants, exhaust and particle-filter parts; the hydrostatic drive’s centre piece, axle driven gear and service unit; chassis, hood, counterweight and overhead guard fittings; seat and cab parts; steering axle and steering-column components; speed-control and pedal assemblies; the full electrical installation including relays, fuse boxes, cable looms, lighting and warning systems; hydraulic control valves, oil tank, hose lines, tilt and lift cylinders; mast rollers, chains, fork carriages, fork arms and sideshifters; and miscellaneous items such as plates and operating material. Every assembly diagram shows the correct sequence and relationship of the parts, so you can see not only what to order but how the components fit together before the new part arrives.

For anyone running Linde H12, H16, H18 or H20-03 trucks — a service workshop, a fleet manager, an owner-operator rebuilding a mast or overhauling a pump — this spare parts list removes guesswork. Instead of describing a broken part to a dealer over the phone, you look up the illustration, note the position number, read across to the Linde part number in the table and order it directly. That shortens downtime, cuts the risk of fitting the wrong component and makes sure small-but-critical items such as sealing rings, grooved rings, o-rings and circlips are ordered with the correct part numbers rather than by size alone.

IMAGES PREVIEW

Instant PDF Delivery

The catalogue is supplied as a single PDF that downloads immediately after checkout — no shipping, no waiting on a parcel and no postage cost. Once it is on your device it opens on a laptop, tablet or phone, and any page can be printed for the workshop bench. Keep it on the service truck, keep it on the office computer, and you have the complete Linde H12 H16 H18 H20-03 spare parts list ready the next time a part needs to be identified.