Manitou CD 15-35 P / CG 15-35 P Genuine Parts Catalogue 547926 PDF Download

Description

Manitou CD 15 P to CD 35 P and CG 15 P to CG 35 P Genuine Parts Catalogue 547926

This is the complete illustrated parts catalogue for the Manitou CD and CG range of rough-terrain forklift trucks, published under catalogue reference 547926. It covers the CD 15 P, CD 18 P, CD 20 P, CD 25 P, CD 30 P and CD 35 P models alongside the CG 15 P, CG 18 P, CG 20 P, CG 25 P, CG 30 P and CG 35 P variants, and it is built around the same logic Manitou dealers use when ordering: plate number, item reference, part number, quantity, machine model and machine serial number.

Every section pairs an exploded illustration with a matching part table. The illustration tells you where the component sits and how the assembly goes together; the table gives you the Manitou part number, the description, the quantity required and the exact machine applicability so you order the right item the first time. Where a part has been superseded, the table flags the replacement reference as well.

File Details

• Manual type: Genuine parts catalogue (illustrated spare parts listing)
• Brand: Manitou
• Manufacturer: Manitou BF, 430 Rue de l’Aubiniere, 44150 Ancenis, France
• Models covered: CD 15 P, CD 18 P, CD 20 P, CD 25 P, CD 30 P, CD 35 P, CG 15 P, CG 18 P, CG 20 P, CG 25 P, CG 30 P, CG 35 P
• Catalogue reference: 547926
• Languages: Multilingual – English, French, German, Spanish and Italian
• Format: PDF
• Page count: 514 pages

Chapters Covered

The catalogue is divided into major groups, each with its own illustrations and part tables:

• Adhesives and decals – safety and machine identification labels for every model in the range
• Load charts – capacity plates for duplex, triple and free-lift mast configurations
• Filters and belts – air cartridge, fuel filter, engine oil filter, transmission oil filter and fan belts
• Automatic vacuum-cleaning pre-filter and cyclonic pre-filter assemblies
• Engine-transmission adaptation – mounts, brackets, air filter housings, ducts and clamps
• Lubricating oil filter and integrated oil cooler
• Fuel pump and fuel filter assemblies
• Alternator and pulley – complete alternator, rotor, stator, regulator, brush set and pulley
• Fuel circuit – injectors, injection pipes, pre-heating plugs and injection pump details
• Oil filter, oil pump and oil feed pipes
• Bodywork – engine hood panels, hinges, gas struts, fasteners and trim
• Counterweight – including towing bar and mounting hardware
• Chassis frame and pedals / linkage assemblies
• Fuel tank and fuel circuit – filler cap, level indicator and seals
• Electrical system – batteries, terminals, cables, support brackets, filters and protection components
• Electrical system (engine – transmission) for 4LE1 / 4IG2 and V3300 / V3600 engine families
• Starter motor – complete unit plus pinion kit, brush set, solenoid and support
• Water flange – thermostat housing, thermostats, seals and temperature senders
• Alternator details – component-level breakdown of the alternator assembly
• Engine stop solenoid and lever assembly
• Electrical system (engine) – pre-heating plugs, relays and temperature sensors
• Cab electrical system – instrument cluster, switches, fuse box, relays, fuses, steering column and printed circuit
• Cab adaptation and heating circuit – heater unit, hoses, valves and controls
• Lighting and signalling – front lamps, rear work lights, indicators and beacon
• Special adaptation (European Community) – front light and work light packages
• Hydraulic kits, 3rd and 4th element (double-acting) with hoses, quick couplers and pulley kits
• Wheels and tyres – inner and outer rims, tyres, inner tubes, wheel nuts and bolts
• Front transmission adaptation (wheel + brake) – gearbox, torque converter, output shafts, bearings and brake assembly
• Rear axle – axle beam, bearings, steering knuckle, tie rods and wheel studs
• Brake assemblies – right-hand and left-hand brake units with wheel cylinders, adjusters and springs
• Differential – pinion, crown wheel, bearings, housing and seal kit
• Hydraulics – lateral displacement cylinders, fork positioner cylinders and hydraulic control linkage
• Lateral displacement carriages – 1150 mm width versions and 151P2 variants for DVT, TLL and DLL mast types
• Hydraulic – PDF + TDL / TLL and PDF + TDL / DLL circuits
• Fork positioner assembly with slides, cylinders, wear pads and grease nipples
• Masts – duplex mast, duplex full free-lift mast and triple full free-lift mast at 3.30 m to 6.00 m lift heights
• Hydraulic main circuit – pump, steering unit, hoses, fittings and filters
• Distributor control – levers, rods, handles and linkage
• Distributors – 2, 3 and 4 element units with pressure limiters, seals and return springs
• Oil pump – complete unit and internal components
• Gearbox – complete unit, gasket sets and transmission distributor
• Steering cylinder – body, seals, rings and scraper
• Lift cylinders – left and right, multiple bore and stroke options
• Free-lift cylinders – D50, D55 and D60 versions across 750 mm to 1000 mm strokes
• Tilt cylinders – piston, rod, seals and joint kit
• Engine block group – cylinder block, oil sump, cylinder head, timing gear housing, rocker cover and breather, camshaft and idler gear, pistons / con-rod / crankshaft, flywheel, governor and rocker assembly
• Gasket sets and head cover / water outlet body
• Clutch – disc and housing
• Intake and exhaust system – silencers, exhaust pipes, intake manifold, exhaust manifold and clamps
• Fuel system – injection pump, fuel circuit, injection pump details
• Cooling system – radiator, expansion tank, hoses, water pump, thermostat and temperature senders
• Braking circuit – master cylinders, brake lines, flow divider, pressure switch and reservoir
• Handbrake – lever, cables, contacts and brackets
• Braking circuit / inching and pedal-linkage assemblies
• Cab – seat, seat rails, suspension kit, seat belt and adaptation kit
• Cab trim and soundproofing – windscreen, wiper motor, wiper arm, rear windows, doors, hinges, locks, handles and profile seals
• Load backrest – standard and complete assemblies

Read end to end, this parts catalogue is effectively a full teardown map of the machine. Each group is self-contained: a visual index at the front routes you to the right plate, the plate shows the assembly in exploded form, and the facing table resolves every numbered callout to a Manitou part number with its quantity and model applicability. Because the applicability column lists the specific CD and CG variants each part fits, you can confirm at a glance whether a component from a CD 25 P also serves a CG 20 P, or whether a lift cylinder is common to the CD 15 P and CD 18 P only.

Model and Engine Coverage

Applicability is quoted throughout against the full CD and CG P-series family, so the catalogue is genuinely usable across a fleet rather than only for a single machine. Engine and equipment references appear where they matter – the 4LE1 and 4IG2 families on the CD 15 / 18 P electrical pages, and the V2403, V3300 and V3600 families on the CD 20 / 25 / 30 / 35 P pages – along with the H20, H25, K21 and K25 designations where those variants are applicable.

Machine serial-number ranges are also quoted in several sections, using the format Manitou prints on the machine plate. That matters for late-production changes: where a component was revised mid-series, the table states which serial break the new reference applies from, so you don’t fit an early part to a later machine or the reverse.

How to Order Correctly

The catalogue reproduces Manitou’s own ordering procedure on its opening pages. To place an order you state the catalogue reference (547926), the plate number, the item reference from the illustration and the quantity required, plus the machine type and its number in the series. With those five pieces of information the correct part number can be identified without ambiguity.

Each table gives you the item number as it appears on the drawing, the Manitou part number, the component name, any characteristics such as thread size, length, diameter or degree rating, the quantity used, a superseded part number column where a reference has been replaced, and the machine applicability. That last column is the one that saves the most time in practice – it removes the guesswork about whether a part crosses between models.

What This Parts Catalogue Lets You Do

With this document on hand you can identify and order replacement components for the hydraulic system, the transmission and torque converter, the braking system, the mast and carriage assemblies, the engine block and its ancillaries, the cooling system, the electrical installation and the cab fittings – all from the original Manitou numbering rather than an aftermarket substitute. Because exploded views show the relationship between neighbouring components, it also doubles as an assembly guide when a job involves stripping a unit down and rebuilding it: you can see the order of seals, spacers, rings and fasteners before you start, and confirm the quantity of each item you will need.

That combination – correct part numbers plus a visual assembly reference – is what keeps a machine out of service for hours rather than days. Ordering the wrong seal or the wrong cylinder variant means a second delivery, a second strip-down and lost working time. Working from the catalogue reference and the machine serial number removes that risk.

IMAGES PREVIEW

Instant PDF Delivery

The catalogue is supplied as a PDF file that is delivered immediately after checkout. There is nothing to wait for in the post and no shipping charge. The file opens on a laptop, tablet or phone, and any page – a plate drawing, a part table, or the ordering instructions – can be printed and taken to the machine or into the workshop. Keep it on a device in the service vehicle and you have the full Manitou parts reference for the CD 15 P through CD 35 P and CG 15 P through CG 35 P range available whenever a machine needs attention.