Manitowoc 9105H Crane Parts Manual PM 296193 – National Crane 900H/1300H Illustrated Parts Catalog PDF

Description

Manitowoc 9105H Crane Parts Manual – PM 296193, Rev 001

Ordering the wrong part for a crane is expensive, and this is the book that stops it happening. This is the illustrated Manitowoc 9105H crane parts manual issued for the 9105H Std Config built on serial number 296193. Published August 30, 2010 under the document number PM 296193 at Revision 001, the PDF works through the machine group by group, pairing exploded-view illustrations with itemised part lists so every ballooned component on a drawing can be traced straight to a part number, a description and a quantity. If you maintain, rebuild, resell or simply keep a National Crane 9105H working, this illustrated parts catalog is the reference you reach for before you pick up the phone.

File Details

• Manual type: Illustrated parts manual (parts catalog)
• Brand: Manitowoc Cranes / National Crane
• Primary model: 9105H Std Config
• Serial number covered: 296193
• Also referenced in group breakdowns: 900H, 1300H, 1300A
• Document number: PM 296193
• Revision: 001
• Publication date: August 30, 2010
• Language: English
• File format: PDF
• Page count: 449 pages including appendices

Chapters and Groups Covered

The contents pages lead into every major assembly on the crane. Group names below are listed exactly as the manual organises them.

• Cab Group – Pot Installation, 900H Swing
• Hardware Installation – Pump
• 22 Ft Wood Super Duty Bed Group – Truck Bed
• Pump Assembly – Piston (Counter Clockwise), complete assembly breakdown
• Neutral Safety Switch Mtg Grp and Neutral Safety Switch Mounting
• Control Valve Group – Upper / Lower Plumbing Group
• Valve Assembly – Pump Manifold
• Boom / Telescope / Swing / Hoist Plumbing Group
• Outrigger Control Installation
• Valve Assembly – Front Outrigger Control, 5 Section Manifold
• Frame Group – Reservoir Installation
• Reservoir Assembly – Hydraulic
• Turret and Gear Box Group
• Gearbox Assembly – Rotation, with full internal breakdown
• Valve Assembly – Holding
• Frame Mounting Group
• Frame Installation Black Work / Frame Installation Station 1
• Cylinder Installation – Lift, 900H
• Cylinder Assembly – 7 1/4″ Lift
• Valve Assembly – Pilot Holding
• Platform Installation – 900H
• Console Installation – Control (Easy Reach, 2 Option), 900H
• Console Assembly – Control (Easy Reach, 2 Option)
• Valve Assembly – Directional Control, 6 Section
• Console Assembly – 2 Option
• Joystick Assembly – Tandem
• Controller Assembly – Outrigger (Short)
• Harness Assembly – Outrigger Controller (Short)
• Switch Assembly – Proximity (Normally Open)
• Harness Assembly – Console / Controls
• Truck Interface Wiring Group (for reference only)
• Harness Assembly – Frame / Torsion Box
• Pigtail Assembly – Throttle Pedal
• Frame Wiring Group
• Single Front Outrigger Mounting Group, Extended Frame Full
• Bumper Assembly and Bumper Bracket Group
• Single Front Outrigger Cylinder Sub Assembly
• Cylinder Assembly – 3″ Outrigger Extension
• ICC Safety Kit, Electronic Alarm Group and Back-Up Alarm
• Owner Manual Storage Box TVA
• Power Take Off Assembly (8 Bolt Double Gear, Single Speed)
• Outrigger Group – Rear Stabilizers Out / Down with mounted Huck bolts, 900H
• Rear Single Outrigger Buildup – Mid Span, 1300H
• Cylinder Assemblies – Outrigger Extension and Outrigger Jack
• Valve Assembly – Outrigger Control, 4 Section
• Arctic Rear Stabilizers Cylinder Sub Assembly and Arctic Outrigger Jack
• Outrigger Beam Buildup and Outrigger Installation
• Single Front Outrigger Plumbing Group, 1300H
• Outrigger Float Group
• Boom Group – Pin Installation, Boom Pivot
• 900H Boom Group – Boom Assembly, 4 Section 105 Ft
• Cylinder Assembly – Telescope
• Jib Grp 25-44 Ft, 1300A, with 1st and 2nd section assemblies
• Pin Assembly – Jib Stow
• Anti 2 Block Install – 250 KB
• Cable Reel Assembly – LWG508 250KB/S
• Sheave Assembly – Turn Around and Guide Assembly – Roller
• Weight Assembly – Anti 2 Block, Switch Assembly
• LMI Boom Kit 250 KB/S No Slew and JIB ATB Group 44 Ft Jib
• Ball Assembly – Overhaul 7 Ton Swivel and Wedge Socket Group
• Hoist Group – Hoist Installation 900H and Hoist Assembly – 2 Speed
• Cord Set, Rotation Drive
• Wedge, Cable and 9/16″ x 390′ Wire Rope
• Decal Group – National Decal Installation and 900H decal installations
• Options Group – Bumper Group 1300H Bolt On and Removable Boom Rest 1300H
• Outrigger Motion Alarm Install and Alarm Assembly – Dual Tone
• LMI Wiring Group – 250 KB
• Super Duty Bed and Mud Flap Mounting, 1300H
• Load Moment Indicator – Module Installation (Master) and LMI Wire Harness Assembly
• Electrical Schematic and Hydraulic Schematic

Read as a whole, this document is a complete component map of the 9105H and its shared 900H / 1300H hardware. Each group page opens with a numbered illustration, and the facing list resolves those numbers into orderable parts – complete assemblies where Manitowoc sells them as a single unit, and sub-components with their own internal call-outs where a rebuild is the practical route. Complete assemblies are flagged as such, and the deeper breakdowns go right down to seals, bearings, races, retaining rings and fasteners.

How the Group Breakdowns Are Built

The structure is consistent across the manual, which is what makes it quick to use under a machine. A section such as Valve Assembly – Directional Control 6 Section is split into inlet, work, and outlet sections, and each of those is then broken into its own housing, spool, plug, poppet, spring and cartridge-and-coil assemblies with 12V coil kits. Gearbox Assembly – Rotation is taken down to pinion shaft, bearing cones and cups, brake housing, brake piston, friction discs, stator plates, planet gears, planet pins and race sets. The Hoist Assembly – 2 Speed includes output gear sets, brake springs and drivers, counterbalance block and valve, hydraulic motor assembly, cord set and the separate gear carrier housings with their planet gears, pins, retainers and bearings.

Cylinder sections follow the same pattern. Lift, telescope, outrigger extension, outrigger jack and arctic outrigger cylinders are all itemised with barrel assemblies, rod assemblies, pistons, glands, locknuts, wipers, rod seals, piston seals, back-up rings and wear rings, plus a listed seal kit for each.

Wiring, Harnesses and Electrical Coverage

Electrical content is heavier than a typical parts catalog. The manual carries harness assemblies for the console and controls, the frame and torsion box, and the outrigger controller, plus a full connector and terminal breakdown covering Deutsch DTM plugs and receptacles, weather pack seals, butt connectors, ring terminals, flexguard and heat-shrink sleeving, fuse ratings and relay part numbers. The truck interface wiring group is included for reference, and the section closes with an electrical schematic.

Appendices

• Appendix A – Alphabetical Index of part descriptions with part numbers and page references
• Appendix B – Numerical Index listing every part number in ascending order with its description and page
• Appendix C – Recommended Spare Parts List with 1-year, 2-year and 3-year recommendations and quantities
• Appendix D – Belt and Filter Maintenance List
• Appendix E – Foot Note Index explaining the symbols used throughout the parts lists

The two indexes are the real time-savers. If you have a part number in your hand but no idea which group it lives in, the numerical index gives you the page. If you know the description but not the number, the alphabetical index works the other way.

What This 9105H Parts Manual Lets You Do

This is the reference that turns a breakdown into an ordered part. Identify a failed component from the exploded view, read its item number across to the list, and you have the part number, the description and how many you need – then check the recommended spare parts list to see whether it is a wear item worth stocking. Rebuild a rotation gearbox, reseal a lift cylinder, replace a joystick, match a proximity switch, trace a harness connector, or confirm which decal belongs on which panel. For anyone running a National Crane 9105H, 900H or 1300H series machine, correct part identification is what keeps the crane working and keeps the wrong box off the shelf.

IMAGES PREVIEW

Delivery is instant. The file arrives as a PDF the moment payment clears, there is nothing to ship and nothing to wait for, and it opens on a laptop, tablet or phone in the workshop or the cab. Print the group pages you need for the job and take them to the machine, or keep the whole manual on a device and search the indexes on screen. One download, the complete illustrated parts catalog for the 9105H at serial 296193.