Raymond Model 4750 4-Wheel Sit-Down Counterbalanced Lift Truck Parts Manual – PDF Download

Description

Raymond Model 4750 Parts Manual – Publication 1253502

The Raymond Model 4750 4-Wheel Sit-Down Counterbalanced Lift Truck Parts Manual is the complete illustrated parts catalog for the 4750 series, published under document number 1253502. This is the resource a parts counter, service technician or fleet manager reaches for when they need to identify the correct component, verify a part number, or put together an accurate order for C40, C50 and C60 trucks across every major mast and attachment configuration. Every assembly is broken down to the part-number level, grouped by the system it belongs to, and cross-referenced in two master indexes at the back.

File Details

• Manual type: Illustrated Parts Manual / Parts Catalog
• Brand: The Raymond Corporation
• Model: 4750 4-Wheel Sit-Down Counterbalanced Lift Truck
• Publication number: 1253502
• Date shown on document: Generated November 29, 2016
• Language: English
• File format: PDF
• Page count: 548 pages

Chapters Covered

The Raymond Model 4750 parts manual opens with a large general information block covering hardware, critical parts and recommended spares, then walks through eight numbered sections plus two indexes. The contents are organised as follows:

• Section 1 – General Information
  • List 1-H: Hardware (bolts, nuts, washers, screws, seal kits, filters and grease fittings)
  • List 1-C: Critical parts (chains, contactors, controllers, lift cylinders, forks, hose assemblies)
  • List 1-R: Recommended spares (alarms, bearings, brakes, bushings, seals, sensors, switches, tires, valves)
• Section 2 – Finish & Accessories
  • Frame & Weight (skid plate, battery roll out, over fender, covers)
  • Hood & Hinge (standard, compact spec, battery roll out)
  • Driver Seat Assembly
  • Head Guard & Accessory (standard, option, compact spec, low head guard)
  • Indicator Plate groupings (levers, fender covers, body, mast decals)
• Section 3 – Steering & Controls
  • Gear Case and Gear
  • Front Axle Shaft (C40/C50 mast, C60 mast)
  • Rear Axle and Tie-Rod (rear axle mount, lock cylinder mount, inner parts, synchronized versions)
  • Steering Wheel and Steering Post
• Section 4 – Drive & Brake
  • Drive Motor Assembly and installation
  • Front Wheel and Tire / Rear Wheel and Tire
  • Parking Brake and pedal assembly
  • Brake Pedal, Master Cylinder, Reservoir Set, Brake Pipe
  • Drum Brake assembly and inner parts
  • Accelerator Pedal
• Section 5 – Electrical Components & System
  • Wiring and Clamp groupings (rear axle, control valve sensor, mast sensor TN / 6K TT / QM)
  • Main Harness, Pin Code Entry / Synchronized, Drive and Pump Motor Cable, Controller Cable, Connector Cable
  • Rear Rack wiring, Front Rack Stay Harness, Hood Harness
  • Meter and Switch groupings (combination switch, instrument panel, pin code entry, horn, DC/DC converter, buzzer, room lamp, combination meter)
  • Height Sensors (TN, 6K TT, QM), Pressure, Tilt Angle, Yaw Rate
  • Pump and Motor, Main Controller, Motor Drive Controller Panel, Contactor Panel and Contactor
• Section 6 – Hydraulic Components
  • Main Lift Cylinder 4K/5K TT (F50-MT Mast)
  • Free Lift Cylinder, Right-Hand and Left-Hand 4K/5K TT
  • Rear Axle Cylinder, Hydrostatic Steering Valve, Drag Link and Steering Piping
  • Front Lift Cylinder 6K TT and QM, Rear Lift Cylinder TN / TT / QM
  • Oil Pump, Tilt Cylinder
  • Oil Control Valve groupings (assembly and fitting, sensor and bracket, inner parts Inlet / Lift / Tilt / Outlet / ATT)
  • Oil Control Valve Link, Body Piping (reservoir to pump and manifold, manifold to cylinders, drain hose, oil level gage)
• Section 7 – Mast
  • Mast common parts and telescopics 4K/5K TT (F50-MT Mast)
  • Single and Dual Internal Hose Reeving
  • Fixed Carriage, Integral Sideshift Carriage, Load Back Rest
  • Carriage Upkit options (center, double fixed, left-hand/right-hand fixed, left-hand ISS)
  • Telescopics, Over the Mast Hoses and Chains
  • Mast Assembly TN, Mast TT C60, Quad Mast
  • Lift Bracket and Fork groupings
  • Chain and Chain Wheel QM / TN
  • Mast Piping (QM, C60 TT, E811 TN, A450 TN, A410/A430 TN, E911 C60 TT/QM)
  • Side Shift Fork Piping E911 / E911B TT, QM
• Section 8 – Options & Kits
  • Lamps (head lamp and front rack combination, LED rear combination, rear rack working, room lamp)
  • Lamp brackets
  • Kit, iW Evolution / EVO (iWAREHOUSE)
  • iPort Interface Kit
• Appendix A – Alphabetical Parts Index
• Appendix B – Numerical Parts Index

In practice, this Raymond 4750 parts manual gives a technician or parts specialist the full exploded-view breakdown of every serviceable assembly on the truck. Each figure carries a numbered callout list with the corresponding Raymond part number, description, service group code, item number and quantity per assembly. That means you can trace a single fastener or O-ring all the way from the illustrated figure to the correct order line, confirm which variants it belongs to (C40, C50, C60 and any mast or attachment combination), and know exactly how many are required. The two indexes at the back let you look up a component either by name or by the part number stamped on the old piece, which is invaluable when a decal or label has worn off in the field.

Coverage Details

The parts listings are tagged throughout with usage notes so you order the right part for the right truck. The manual differentiates between standard, compact spec, low head guard, high capacity spec and battery roll out variants, and separates C40, C50 and C60 trucks where the components differ. Mast coverage spans TT, TN, QM and Quad Mast configurations, including 4K and 5K TT F50-MT Masts, and the attachment-specific listings cover A405, A410, A430, A450, E811, E911 and E911B side shift and fork piping arrangements. Also included are the height sensor wiring variations for H2000 through H7000 lift heights, which is the kind of detail that saves a whole shift when you are chasing an intermittent fault.

Why This Parts Manual Matters

Ordering a lift truck part from a generic listing or an aftermarket catalogue is how you end up with a seal that does not fit, a chain that is the wrong pitch, or a sensor that plugs into the wrong harness. The Raymond 4750 parts manual eliminates that risk. Every figure is keyed to a specific service group and item number, so the part you pull out matches the part you put back. The recommended spares list at the front is also a ready-made stocking guide – it flags the bearings, seals, springs, switches and valves that fail most often, so a maintenance department can keep the right parts on the shelf instead of waiting on a delivery.

What You Can Do With It

• Identify any serviceable component on a Raymond 4750 by name or by looking up the old part number
• Confirm the correct part number for a specific truck build – C40, C50 or C60, standard or compact spec, high capacity spec, low head guard, battery roll out
• Match mast and attachment components across TT, TN, QM and Quad Mast configurations
• Build an accurate parts order for a repair, a rebuild or a scheduled service
• Cross-reference fasteners, seals, O-rings and hardware through Lists 1-H, 1-C and 1-R
• Use the exploded views to plan disassembly and reassembly sequence before starting the job
• Stock a sensible recommended spares inventory based on the manufacturer’s own list

IMAGES PREVIEW

Instant PDF Delivery

This Raymond Model 4750 4-Wheel Sit-Down Counterbalanced Lift Truck Parts Manual is delivered as an instant PDF download – no shipping, no waiting for a physical book to arrive. It opens on any laptop, tablet or phone, and every page can be printed if you prefer a paper copy in the workshop. Keep it on the service laptop, drop it on the parts counter terminal, or print the figures you need for the job at hand. With 548 pages and a publication date of November 29, 2016, it is a complete, current parts reference for the 4750 series and a working tool you will come back to every time a truck rolls into the bay.