Sandvik Leopard DI650i Parts Manual – Section 7 Drilling Module 2021 PDF

Description

File Details

• Manual type: Parts manual / spare parts catalogue
• Machine: Sandvik Leopard DI650i
• Scope: Section 7 – Drilling Module
• Language: English
• Pages: 157
• Format: PDF
• Date: 2021, with drawing sheets dated 210429

The Sandvik Leopard DI650i Parts Manual – Section 7 Drilling Module 2021 PDF is the illustrated parts breakdown for the entire drilling module of the Leopard DI650i, from the feed beam down to individual screws, nipples and O-rings. Every assembly in this section is drawn as an exploded view with ballooned reference numbers, and each reference number is resolved against a table listing the part number, the English description, the standard designation where one exists, and the quantity required. Nothing in this file is generic filler: it is the module-by-module parts data for this rig.

Chapters Covered

• NSS Feed Assembly (BG 011 577 18)
• NSS Feed Mechanism, Mounting (BG 006 951 95)
  • NSS Feed Mechanism, Assembly (BG 007 838 72)
  • NSS Motor Assembly, Hydraulic, Feed Mechanism (BG 014 063 16)
  • NSS Bracket, Assembly (BG 008 118 47)
  • NSS Tensioner, Feed Chain Tensioner (BG 006 891 78)
• NSS Reel, Hose, Mounting (BG 008 097 80) and Hose Reel Assembly
• NSS Bulkhead, Mounting (BG 010 102 95) and Bulkhead Assembly
• NSS Valve Assembly, Rod Handling / Drilling, Installation (BG 007 042 72)
  • NSS Valve Assembly, Rod Handling / Drilling, Installation (BG 007 057 42)
  • Housing, For Valves (BG 008 185 06)
  • NSS Valve Assembly, Adapter Assembly, Feed Motor (BG 012 783 08)
  • NSS Manifold, Valve Assembly, P_MAX 280 bar, For Feeding Assembly (BG 012 666 89)
  • NSS Valve Assembly, Tube Handler Valve (BG 008 588 55)
  • NSS Valve Assembly, Adapter Assembly (BG 011 213 11)
  • Manifold, Valve Assembly, Tube Handler Valve (BG 008 475 18)
• NSS Support, Hose, Mounting (BG 007 564 18) and Hose Support Assemblies (BG 008 361 81, BG 013 663 81)
• NSS Support, Hose, Mounting (BG 009 942 40)
• NSS Cassette, Tubes, Installation (BG 013 990 51)
  • NSS Frame Assembly, Rear (BG 013 991 08)
  • NSS Rotation Mechanism, RR65 / OMR 80 (BG 009 563 52)
  • Hydraulic Motor, Gerotor, VG_MAX 80 ccm/rev, P_MAX 200 bar (550 163 47)
  • Gear, Planetary (873 455 99)
  • NSS Hydraulic Cylinder, Double-Acting, Cylinder Assembly (BG 013 992 17)
  • Hydraulic Cylinder, Double-Acting (BG 013 992 15)
  • NSS Holder, Sensor M 18 (BG 005 071 97)
• NSS Pipe, 6 m Pipes (BG 006 473 63)
• NSS Box, Front, Assembly (BG 013 990 56)
• NSS Handler, Tube, Mounting (BG 008 192 89)
  • NSS Handler, Tube, Assembly (BG 011 203 46)
  • NSS Handler, Tube, Assembly (BG 008 190 88)
  • NSS Handler, Tube, Assembly 2 (BG 008 187 47)
  • Arm, H-Arm (BG 007 921 37)
  • NSS Clamp, Assembly (BG 008 185 15)
  • NSS Block, 8XG3/8 (BG 008 277 03)
  • NSS Cylinder Assembly (BG 008 191 03)
  • Hydraulic Cylinder, Double-Acting, 40/25-115, LIMIN=310 (551 810 07)
  • NSS Hydraulic Actuator, Semi-Rotary, Adapter Assembly (BG 015 110 46)
• Break Out Table (BG 013 562 45) and NSS Break Out Table, Assembly (BG 013 562 47)
  • NSS Cylinder Assembly (BG 008 770 22)
  • Hydraulic Cylinder, Double-Acting, 63/40-120, LIMIN=400 (551 811 22)
  • Hydraulic Cylinder, Double-Acting (551 753 51)
  • Hydraulic Cylinder, Double-Acting, D140 D120 S=60 (552 196 56)
• NSS Control Assembly, Control Mounting (BG 007 849 04) and NSS Control Assembly (BG 007 849 10)
  • Bearing, Cylinder Mounting Bearing (BG 007 813 78)
  • NSS Hydraulic Cylinder, Double-Acting, Assembly (BG 008 649 14)
  • NSS Pre-Installed Device (BG 011 304 32)
  • Hydraulic Cylinder, Double-Acting, 55/32-90 (BG 007 694 84)
• NSS Cylinder Assembly (BG 008 731 42) and Hydraulic Cylinder, Double-Acting, 63/40-500, LIMIN=790, LLIMIT=50 (551 811 33)
• NSS Pin, Ground (BG 004 159 85)
• NSS Rail, Safety, Mounting (BG 013 552 30), Wire, Safety (550 392 43) and Limit Switch, Safety, Emergency Stop Pull-Wire Switch (551 687 83)
• NSS Frame Assembly, Mounting (BG 008 030 74)
• NSS Guard, Mounting (BG 013 477 92), NSS Guard, Assembly (BG 013 477 93) and NSS Guard, Centralizer Guards (BG 009 512 68)
• NSS Head, Suction, Mounting (BG 010 392 05) and NSS Head, Suction, Assembly (BG 008 140 21)
• NSS Electrical Assembly, Drilling Module (BG 011 538 21)
  • NSS Junction Box Assembly (BG 008 220 23)
  • NSS Cable Set, JB2304 Cable Set (BG 008 217 37)
  • NSS Control Box Assembly (BG 011 520 26)
  • NSS Cable Set, RHJB Cabling (BG 011 513 57)
  • NSS Cable Set (BG 013 313 17)

Taken as a whole, this section gives a technician or parts desk the full drilling module breakdown of the Leopard DI650i in one place. The chain runs from complete assemblies such as the feed beam and feed mechanism, through intermediate units like the hose reel, bulkhead, valve manifolds and tube handler arms, and finishes at consumable-level details: bearings, circlips, seals, grease nipples, pins, clamps and fasteners, each with its own part number and quantity. Because the breakdown follows the way the machine is actually built, you can work either direction – start from a failed component and trace it back up to the assembly it belongs to, or start from an assembly page and build a full bill of materials for a rebuild.

How This Parts Manual Helps You Order and Fit the Right Components

Ordering the wrong part on a drilling rig is expensive in downtime as much as in money, and the only reliable defence is the exact part number for the exact assembly. The tables in this Sandvik Leopard DI650i Parts Manual resolve every balloon on the drawings to a numbered item, so you can confirm not only the main component but the seal kit, bearing, circlip, washer or nipple that sits behind it. Sub-assembly listings are broken out separately – the planetary gear, the hydraulic motor, the double-acting cylinders, the semi-rotary actuator, the proportional and directional valves – which means rebuild work on the rotation mechanism, break out table, tube handler or control assembly can be planned part by part rather than by replacing whole units.

Hydraulic and electrical content is included alongside the mechanical breakdown. The valve assembly pages cover the rod handling and drilling installation, the tube handler valve manifold and the feed motor adapter assembly, while the electrical section lists the junction box, control box, wiring harness and cable sets for the drilling module, including the CAN cabling between the boom junction box and the RHJB. Safety-related items – the drill pipe safety rail, the pull-wire emergency stop limit switch, the safety wire and the centralizer guards – are also catalogued, which is useful when a machine has to be brought back to a compliant condition after a repair.

Exploded illustrations mean you can see orientation and assembly order rather than guessing from a number alone, and the quantity column tells you how many of each item the assembly consumes, so a single trip to the parts counter covers the whole job. Whether you are maintaining one Leopard DI650i or running a fleet, this section removes the ambiguity from parts identification on the drilling module.

IMAGES PREVIEW

Instant PDF Delivery

The Sandvik Leopard DI650i Parts Manual – Section 7 Drilling Module 2021 PDF is delivered as a digital download the moment your order is complete – no shipping, no waiting for a courier, no physical binder to lose in the workshop. Open it on a laptop in the office, a tablet on the service truck or a phone at the rig, print the assembly pages you need for the job and keep the rest on file. Sections can be printed individually, so the feed mechanism drawing or the valve manifold page can travel with the mechanic while the complete file stays safely archived.