Tamrock EJC 145 Parts Manual – Serial 145-3702 Illustrated PDF

Description

Tamrock EJC 145 Parts Manual – Serial 145-3702

This is the illustrated parts manual for the Tamrock EJC 145 underground loader built under serial number 145-3702. It is the reference document used to identify and order replacement components for that specific machine, with every assembly, sub-assembly and individual part number laid out in exploded-view form. The document was produced under part number PT-001-07-00 and follows the same structure as the machine order: the basic unit is documented first, and pre-engineered options are added afterward with their own component breakdowns.

File Details

• Manual Type: Illustrated Parts Manual
• Brand: Tamrock Loaders Inc. / EJC Mining Equipment Inc.
• Model: EJC 145 Underground Loader
• Serial Number: 145-3702
• Document Number: PT-001-07-00
• Language: English
• Page Count: 382
• Format: PDF

Chapters Covered

• Section 1: Table of Contents and Introduction
• Section 2: Power Unit Components – Detroit Diesel Series 40 engine assembly (190 HP), exhaust assembly, air cleaner group, radiator and cooler assembly
• Section 3: Drivetrain Components – 4-speed Clark transmission, torque converter, front and rear Posi-Stop axles, differential and carrier assemblies, brakes, drivelines, rims and tires
• Section 4: Frame Related Components – Rear frame, front frame, bucket module, boom, operator station, seat assembly, ROPS canopy, decals and nameplates, Lincoln automatic lubrication system
• Section 5: Hydraulic Components – Hydraulic pumps, steering and charge valves, control valves, cylinders, accumulators, tank, hoses and fittings
• Section 6: Air Components (if fitted)
• Section 7: Electrical Components – Wiring harnesses, instrument panel, headlights, sensors, circuit breakers, relays
• Options – Automatic lubrication, SAE ROPS/FOPS canopy, engine shutdown system, Spanish manuals and decals

The Tamrock EJC 145 Parts Manual gives a technician a fully indexed route from a machine assembly down to a single bolt, seal, gear or sensor. Each system is broken into its major groups – for example the transmission is split into reverse and high shaft group, forward and 2nd shaft group, low shaft group, idler shaft and 4th speed clutch group, output shaft group and solenoid control valve assembly – so a part can be located by function rather than by guesswork. Exploded illustrations are paired with parts lists that carry the part number, description and quantity for every item, and group numbers cross-reference each assembly back to its parent section. That structure is what makes an EJC 145 Parts Manual useful both for planned rebuilds and for tracking down a single worn component on a machine that is still in service.

What This Manual Covers

The engine section documents the Detroit Diesel Series 40 power unit as installed in the EJC 145, including the fuel filter assembly, oil filter, starter, alternator, serpentine belt, coolant and oil temperature sensors, oil pressure sensor, manifold pressure sensor, timing reference sensor and the steel braided fuel line. The cooling package is covered at component level with radiator core, fan shroud, fan guard, charger air cooler, CAC core, oil cooler core, inlet and outlet tanks, return tank, expansion tank and radiator cap.

The drivetrain is the largest part of the catalog. Torque converter components include the impeller, turbine, stator support, reaction member, hub assemblies, charging pump and the pressure regulator valve group. The transmission breakdown covers clutch packs, pistons, sealing rings, sprags, shafts, gears, bearings, snap rings and the full solenoid control valve assembly with forward, reverse, range, low speed and 2nd speed spools. Front and rear Posi-Stop axle sections document the internal gear hubs, planet carriers, sun gears, side gears, spider assemblies, no-spin assemblies, pinion and ring gear sets, brake assemblies and wheel studs. Driveline assemblies, universal joints, slip yokes and spider assemblies are also listed.

The hydraulic section covers the pumps, steering and charge valve assembly, hoist valve, directional control valve, brake valve, pressure reducing valve, check valves, accumulators and the full hydraulic tank with strainer, breather and filter components. Cylinder groups for the steer, lift and dump functions are broken down into barrel assemblies, rods, glands, pistons, seal kits and bearings.

The electrical section documents the central harness, front frame harness, rear light harness, engine harness for the DDEC Series 40, shifter harness, instrument panel wiring and battery cable set. Individual items include circuit breakers, relays, pressure switches, senders, gauges, headlights, back-up alarm, warning buzzer, hour meter, voltmeter and tachometer.

Frame and operator station coverage includes the rear frame weldment, front frame weldment, boom weldment, intermediate and lower links, bucket welding and machining, dump cylinder guard, axle cradle and bolster assembly, hardened bushings, hinge pins, thrust washers and all mounting hardware. The operator station lists the compartment weldment, seat, seat belt, canopy, kick plates and guards.

Why This Manual Matters

Ordering a part for an EJC 145 without the correct group number is a fast way to receive the wrong component. This manual removes that risk by tying every part number to a specific assembly, revision and quantity. It is the correct reference for anyone maintaining, rebuilding or repairing a Tamrock EJC 145 loader built under serial 145-3702, whether the work is a routine filter change or a full transmission and axle overhaul.

IMAGES PREVIEW

The file is delivered instantly as a PDF download, requires no shipping, and can be opened on any computer, tablet or phone. Pages can be printed individually when a copy is needed at the machine, which is often the most practical way to work on a specific assembly.