TCM FG20 FD20 FG25 FD25 C6H T6H W6H Forklift Parts Catalogue PF-37AC – Gas & Diesel

Description

TCM FG20 FD20 FG25 FD25 C6H T6H W6H Parts Catalogue PF-37AC

This is the TCM parts catalogue numbered PF-37AC, issued by TCM Corporation for the gas and diesel powered forklift truck range. It covers the FG20C6H, FD20C6H, FG20T6H, FD20T6H, FG20W6H, FD20W6H, FG25C6H, FD25C6H, FG25T6H, FD25T6H, FG25W6H and FD25W6H models. Every figure is presented as an exploded illustration paired with a part number list, so a component can be located visually and then matched to the correct part number and required quantity.

The catalogue opens with the standard TCM ordering instructions, covering how to read the machine name plate and quote the model name, specification and serial number (machine number) alongside each part number. A symbols and abbreviations key explains the markings used throughout the lists, including ASSY for assembled units, RH and LH for right and left hand as viewed forward on the truck, AR for quantity required, and the thickness and set/kit markers.

File Details

• Manual type: Parts catalogue
• Brand / publisher: TCM Corporation
• Document number: PF-37AC
• Models covered: FG20C6H, FD20C6H, FG20T6H, FD20T6H, FG20W6H, FD20W6H, FG25C6H, FD25C6H, FG25T6H, FD25T6H, FG25W6H, FD25W6H
• Power source: Gasoline and diesel
• Language: Japanese and English
• Page count: 619 pages
• File format: PDF

Chapters and Figure Groups Covered

• Fork
• Lift Bracket
• Backrest
• Mast
• Tilt Gauge (TG, PPC, PR, PRC, MPC)
• Lift Cylinder (Front)
• Lift Cylinder (Rear)
• Mast Piping
• Air Cleaner (Gasoline)
• Air Cleaner (Diesel)
• Air Duct (Gasoline)
• Air Duct (Diesel)
• Pre Cleaner
• Cooling Unit (Gasoline)
• Cooling Unit (Diesel: Clutch)
• Cooling Unit (Diesel: Tor-Con & Oil Clutch)
• Radiator Parts & Reserve Tank
• Fan Shroud (Gasoline: Clutch & Tor-Con)
• Fan Shroud (Gasoline: Oil Clutch)
• Fan Shroud (Diesel: Clutch & Tor-Con)
• Fan Shroud (Diesel: Oil Clutch)
• Fuel Tank Cap, Grommet, Fuel Pipe and Fuel Hose
• Exhaust System (Gasoline)
• Exhaust System (Diesel)
• Vertical Muffler, Clamps and Stays
• Post & Tail
• Wire Harness (Diesel): DPF Monitor Harnesses
• Front Tube & Joint (Diesel): DPF
• Combination Meter (Diesel)
• Combination Meter (Gasoline): EECG, EECLP
• Combination Switch and Steering Shaft Switches
• Electric Parts – Horn, Flasher Unit, Fuse Box, Starter Switch, Relays
• Electric Parts (2/2) Gasoline – Battery, Cables, Holder
• Electric Parts (2/2) Diesel – Battery, Cables, Holder
• Front Guard Wire Harness (Clutch & Oil Clutch)
• Front Guard Wire Harness (Tor-Con)
• Engine Wire Harness (Gasoline: Clutch & Oil Clutch)
• Engine Wire Harness (Gasoline: Tor-Con)
• Engine Wire Harness (Diesel: Clutch & Oil Clutch)
• Engine Wire Harness (Diesel: Tor-Con)
• Back Buzzer
• Head Lamp, Front Combination Lamp and Rear Combination Lamp
• License Light (RRE, RW, TUE and LPG/LPO/CNG variants)
• Rear Working Light (RWLR, RWLL, RWL2)
• Revolving Light (RLY, RLR)
• Spot Light
• Heater Unit
• Heater Valve & Elbow (Gasoline)
• Heater Valve & Elbow (Diesel)
• Fan
• Ammeter
• Torque Converter Thermometer
• Torque Converter Pressure Gauge
• Speedometer
• Speed Alarm System (SASB, SASR, SASC)
• OK Monitor
• Drive Unit
• Clutch
• T/M Case, T/M Gear and Transmission Internals
• Drive Unit Mount (Tor-Con)
• Torque Converter
• Charging Pump (Tor-Con)
• Clutch Pack (Tor-Con)
• Control Valve (Tor-Con)
• Reduction
• Differential
• Axle Housing, Hub and Drum
• Steering Wheel Unit
• Gear Box

Read as a whole, the PF-37AC catalogue is a complete breakdown of the machine into its serviceable assemblies. The front end – fork, lift bracket, backrest, mast, tilt gauge and both lift cylinders – is documented with its piping. The engine bay side follows with air cleaner and duct variants split by fuel type, the pre cleaner, the full cooling package including radiator, reserve tank, fan shroud and dust screens, the fuel filler arrangement, and exhaust systems for gasoline and diesel with the vertical muffler and its mounting stays. The electrical section is unusually thorough: combination meters for diesel and gasoline, combination switches, front guard and engine harnesses separated by clutch type, batteries and cables for both fuels, buzzers, the complete lighting set from head and combination lamps through license, rear working, revolving and spot lights, plus heater, ammeter, torque converter thermometer and pressure gauge, speedometer, speed alarm system and OK monitor. The driveline closes the catalogue with the drive unit, clutch, transmission case and gear train, torque converter and its mount, charging pump, clutch pack, control valve, reduction, differential, axle housing with hub and drum, steering wheel unit and gear box.

What This Parts Catalogue Lets You Do

Because every assembly is drawn in exploded form and cross-referenced to a numbered parts list, this TCM forklift parts catalogue lets you identify the exact component you need before you order it, rather than guessing from a description. You can trace a part from the illustration to its part number and required quantity, confirm whether an item is supplied as an assembly, as a set or kit, or as a single unit, and check that the number you are about to order actually belongs to your truck’s specification and serial range.

That matters most where the same truck family carries several build variations. The FG20, FD20, FG25 and FD25 in C6H, T6H and W6H form differ in clutch type, transmission type and market equipment, and the catalogue reflects this directly – cooling units and fan shrouds are separated for clutch, Tor-Con and oil clutch machines, meters are separated for gasoline and diesel, and lighting and harness sections carry market and option markers such as RRE, RWL, RLY, TTM, OKM, HR, DPF and SAS variants. Working from the correct page prevents ordering a hose, shroud, lamp or harness that physically will not fit the truck in front of you.

For workshops maintaining a fleet of these trucks, the value is in having the whole machine in one document. Assembly numbers, bolts, washers, nuts, clips, bands and O-rings are all listed alongside the major components, so consumable hardware can be reordered at the same time as the failure part. Rebuild work on the transmission, torque converter, charging pump, clutch pack, control valve, reduction and differential is supported by exploded views showing the internal order of gears, bearings, rings, shims and seals – useful when a unit is stripped and the correct sequence and shim thicknesses need to be confirmed on reassembly.

IMAGES PREVIEW

Delivery is by instant PDF download once payment is complete. There is no shipping and nothing to wait for – the file opens on a laptop, tablet or phone, pages can be printed for the workshop bench, and the exploded views can be zoomed for detail. The TCM FG20 FD20 FG25 FD25 C6H T6H W6H forklift parts catalogue PF-37AC is the reference to keep on hand whenever a part number needs to be certain rather than approximate.