Terex Fuchs MHL320 Illustrated Parts Catalog – Serial 0965-1141 – Multilingual PDF

Description

The Terex Fuchs MHL320 Illustrated Parts Catalog – Serial 0965-1141 – Multilingual PDF is the complete spare-parts reference for the MHL320 mobile hydraulic loading machine. Published by Terex Deutschland GmbH (Terex Fuchs business area, Industriestr. 3, 76669 Bad Schonborn, Germany) and issued on 14 August 2012 at revision 1.00, this Terex Fuchs MHL320 illustrated parts catalog covers every serviceable group on machines within serial range 0965 to 1141. Across approximately 944 pages, it pairs exploded illustrations with four-language parts tables listing item position, part number, quantity and the English, German, French and Spanish designations for each component. Whether the task is identifying a replacement hydraulic pump, ordering an outrigger cylinder seal kit, tracing a pilot control hose, or locating the correct bonnet hinge for the engine cover, this Terex Fuchs MHL320 parts catalog provides the exact number to quote.

File Details

• Manual type: Illustrated Parts Catalog (Ersatzteilkatalog / Catalogue pieces / Catalogo de repuestos)
• Brand: Terex Fuchs
• Manufacturer: Terex Deutschland GmbH – Terex Fuchs, Industriestr. 3, 76669 Bad Schonborn, Germany
• Model: MHL320 mobile hydraulic loading machine
• Serial number range: 0965 – 1141 (MHL320110 0965 – 1141)
• Issue date: 14-August-2012
• Revision: 1.00
• Languages: English, German, French, Spanish
• Page count: Approximately 944 pages
• File format: PDF

Chapters Covered

This Terex Fuchs MHL320 illustrated parts catalog is divided into twelve main chapters, each broken down into sub-sections that follow the machine’s assembly logic from the ground up:

• 1. Service Parts – filters, fan belts, cartridges, sealing rings, filter material, flanges, straight and elbow flange couplings, corrugated hose holders.
• 2. Engine And Accessories – engine, cylinder-head gasket, timing gears and turbocharger hoses, oil pan and dipstick, crankcase breather and cylinder-head cover, oil pump and engine mountings, oil cooler, oil filters and pressure switch, fan and water pump, thermostat, fuel pre-heater and flywheel housing, fuel pump and lines, fuel pre-filter, turbocharger and injector pump, exhaust pipes, engine wire harness, connector, alternator and belt, starter, fuel hoses and fittings, engine radiator, reversing fan, engine preheater, main hydraulic pump.
• 3. Hydraulic Installation Undercarriage – 4-point outrigger 1 and 2, 2-point outrigger with blade 1, 2 and 3, blade hydraulic cylinder, travel drive and gear shift, steering, travel brake and park brake, oscillating axle locking, additional blade, rotating joint, electrical installation for the blade, individually operated 4-point outrigger.
• 4. Hydraulic Installation Uppercarriage – cab floor installation, shut-off valve, right and left joysticks, steering column, travel brake and cab emergency lowering, accelerator pedal, pilot control lines to the control block for travel, stabilizer, boom, dipperstick and gripper, compact pilot control block, slewing motor pilot control, cab lift arm hose clamps, pilot pressure supply, tank lines, priority valve, grab rotation, cab lift, hydraulic oil cooler, working hydraulics and control block piece parts.
• 5. Electrical Installation – cab floor, cab floor control box, engine surroundings, central area, cable kit for valves, power supply, cab lift mechanism, central electrical system, controller components, control panel 1 and 2, lighting, 9 kW and 11 kW generator installations and generators, electrical box mounting parts, undercarriage wiring, supply for working lights and beacon.
• 6. Undercarriage – 4-point outrigger, 2-point outrigger with blade, additional blade, scraper bars, axles, travel gear and travel motor, wheels (solid tyres and air tyres), tools, front axle (rigid and steering), brakes, planetary gears, differential gear, steering cylinder, rear axle (full floating), drive transmission (change-speed and power-shift), park brake, travel motor piece parts.
• 7. Uppercarriage – uppercarriage, boom bearing arrangement, counterweight, loose parts, maintenance ladder, cab floor and cab lift mechanism, console with heating and air-conditioning, lining for hydraulic oil cooler and engine radiator, additional filter and intake box, engine lining, engine cover, rear-cab lining, right-side lining, rotating joint, swing gear with swivel motor, hydraulic oil tank, refilling and ventilation filter, return filter, diesel tank, refueling pump, hydraulic oil preheating.
• 8. Cab – cab variations, windscreen washer, windows and window rubbers, windscreen and sun visor, inside lining and equipment, roof flap, rain shield and mirror, door, condenser, driver’s seat variants (mechanical spring cushion, air cushioned) with their piece parts, right and left control level supports, heater, auxiliary heating, air conditioning systems 1 and 2, radio, protective grating, cab ventilation system.
• 9. Central Lubrication System – overview, slew ring, cab lift mechanism, working equipment, pump piece parts, distributor and accessories, centralised lubrication system accessories.
• 10. Signs And Warning Labels – universal labels 1, 2 and 3, language-specific labels (German, English, French, Spanish, Danish, Dutch, Swedish, Finnish, Italian, Norwegian, Portuguese, Polish, USA, Russian, Greek, Czech, Latvian, Hungarian, Romanian, Bulgarian).
• 11. Working Equipment – quick couplings on the stick head, ball shut-off valves, 8.5 m working equipment (with boom 4.2 m, hydraulic installation, boom hydraulic cylinder, dipperstick 4 m, dipperstick hydraulic installation, electrical installation), 9.5 m working equipment, 10.4 m working equipment, multipurpose stick 8.2 m and 9.2 m versions.
• 12. Safety Equipment – pipe rupture valve (boom and dipperstick hydraulic cylinders), overload warning without and with pipe rupture valves, overload shutdown with pipe break protection and its electrical installation, tool filter on 4.2 m and 5.2 m booms, warning device for driving, kinematics limiting (loading height and reach limiting), lift cylinder cushioning, rear view camera and its electrical installation, high-pressure safety filter.
• Alphanumeric parts list – a consolidated numeric index at the back of the catalog, mapping every part number to the page where it appears, so a part can be located from its number alone.

Together, these twelve chapters and the closing alphanumeric index turn the Terex Fuchs MHL320 illustrated parts catalog into a full top-to-bottom reference for the MHL320. Rather than describing how to repair the machine, the catalog is built to answer one question precisely: which part number do I need for this exact assembly, in this exact serial range. Every illustration is followed by a parts table that shows where each component sits in the drawing, what quantity the machine takes, and what Terex Fuchs calls that part in four languages at once, so a dealer in Germany, a workshop in Spain and a parts desk in the UK all read the same page.

Working With the Multilingual Parts Tables

Each parts table in this Terex Fuchs MHL320 parts catalog is arranged in the same order: item position number, part number, quantity, and then the component name given in English, German, French and Spanish. That layout means the catalog can be used with equal confidence by an English-speaking technician, a German workshop, a French dealer and a Spanish-speaking operator, without any of them needing to translate part names on the fly. Where a component is supplied as bulk stock (hoses and profiles), the quantity column states the length in metres as fitted to the machine, so the correct length can be ordered directly.

Before ordering, always confirm the machine’s serial number against the range printed on the cover. This edition of the Terex Fuchs MHL320 illustrated parts catalog applies to serial numbers from 0965 up to 1141, and any MHL320 outside that range may use different components in some assemblies. The catalog itself notes that the graphic representations may not match the original part exactly in every detail – the part number in the table, not the drawing, is the authoritative reference.

Every Major System the MHL320 Relies On

The MHL320 is a wheeled material handler that lives or dies by its hydraulics, so it is no surprise that hydraulic coverage dominates this parts catalog. Chapter 3 and chapter 4 together carry the undercarriage and uppercarriage hydraulic installations in full – outrigger legs, blade cylinders, travel drives, steering, oscillating axle locking, cab lift, grab rotation, priority valve, control blocks and the rotating joint that passes oil from the fixed chassis to the slewing uppercarriage. Each of these is broken down to individual seal kits, fittings, T-pieces, hoses, hose clamps, bolts and washers.

Chapter 2 gives the same depth to the power unit, covering the TCD 2012 L04 2V diesel engine and everything bolted to it: head gaskets, timing gear components, oil pan and dipstick, crankcase breather, cylinder-head cover, oil pump and mountings, oil cooler, oil filters, pressure switch, fan, water pump, thermostat, fuel pre-heater, flywheel housing, fuel pump, fuel lines, pre-filter, turbocharger, injector pump, exhaust pipe, engine wire harness, connector, alternator and drive belt, and starter motor. Because the engine chapter lists every gasket, seal ring, bolt and fitting separately, this Terex Fuchs MHL320 parts catalog can be used not just to replace a failed component but to rebuild the entire engine accessory package.

Chapter 5 handles the electrical installation in equally granular terms, from the cab floor control box and central electrical system to the controller components, control panels, lighting, generator options in 9 kW and 11 kW variants, and the supply for working lights and the beacon. Chapter 6 covers the undercarriage hardware – axles, travel gear, travel motors, wheels, brakes, planetary gears, differentials and the park brake. Chapter 7 addresses the uppercarriage itself, including the counterweight, boom bearing arrangement, maintenance ladder, cab floor and lift mechanism, hydraulic oil tank, refueling pump, diesel tank and hydraulic oil preheating. Chapter 8 covers the cab from the seat to the sun visor, the door, the windows and the air-conditioning system.

Chapter 11 handles the working equipment, covering the close-range shut-off system, the 8.5 m, 9.5 m and 10.4 m work equipment packages, the multipurpose stick versions (8.2 m, 9.2 m and 3.7 m), the boom and dipperstick weld assemblies, the hydraulic installations, and the electrical installations for the working equipment. Chapter 12 gathers all the safety devices – pipe rupture valves, overload warning, overload shutdown, tool filter on the boom, kinematics limiting for loading height and reach, lift cylinder cushioning and the rear view camera. Chapter 9 covers the central lubrication system, and chapter 10 collects every sign and warning label in the machine’s language options.

Who This Catalog Is For

This Terex Fuchs MHL320 illustrated parts catalog is aimed at the people who actually keep an MHL320 running: workshop technicians ordering replacement parts, parts department staff at Terex Fuchs dealers, mechanics rebuilding a hydraulic cylinder or a travel drive, and owners of a machine in the 0965 to 1141 serial range who want to identify parts without relying on the dealer network for every lookup. It is equally useful when preparing a rebuild or refurbishment, because every seal, gasket, bearing, bolt and fitting is listed with its own part number rather than folded into a single assembly number.

Get Immediate Access

With this Terex Fuchs MHL320 illustrated parts catalog at hand, an owner or technician can correctly identify the exact part number for a hydraulic pump, a cab lift cylinder, an outrigger seal kit, a control-block piece part, a rear-view camera bracket, a warning label in the right language, or a wheel nut for the machine’s solid-tyre or air-tyre configuration. Working from correct part numbers matters because an incorrect substitution in a hydraulic or safety system is not just a wasted order – it can compromise the machine. The catalog also makes cost estimation and stock planning realistic, since every assembly is broken down to the level at which it is actually ordered and installed.

IMAGES PREVIEW

The Terex Fuchs MHL320 Illustrated Parts Catalog – Serial 0965-1141 – Multilingual PDF is delivered as an instant digital download once payment is confirmed. There is no shipping, no waiting for a courier and no physical binder to keep on the shelf. The file opens on any device – desktop, laptop, tablet or phone – and any page can be printed for use on the workshop floor. Whether you are on a service call, at the parts counter or rebuilding an MHL320 in the shop, the full catalog is available the moment you need it.