Volvo P6820C ABG Paver Parts Catalog 20048811-A – PDF Parts Manual

Description

Volvo P6820C ABG Parts Catalog 20048811-A

This is the complete parts catalog for the Volvo P6820C ABG tracked paver, published under document number 20048811-A with catalogue id 20691. It is the reference used to identify and order components for the P6820C ABG paver across its production versions, including the 12762300 P6820C ABG, 12806695 P6820C ABG ETC, 12806700 P6820C ABG GTC and 12806705 P6820C ABG GST product versions.

The catalog is organised into numbered groups running from the preface and instruction pages through the engine, electrical system, power transmission, brakes, track assembly, cab and platform, hydraulics and miscellaneous equipment, and finishes with a replaced-parts list and a full numerical index. Every figure is tied to a part number, a quantity column and a position number so a component can be traced from an exploded drawing straight to its order number.

File Details

• Manual type: Parts catalog / spare parts manual
• Brand: Volvo Construction Equipment
• Model: P6820C ABG tracked paver
• Document number: 20048811-A
• Catalogue id: 20691
• Language: English, French, German, Spanish and Swedish
• Page count: 850 pages
• File format: PDF

Chapters Covered

The catalog follows the Volvo group system. The main sections are:

• Group 1 – Preface and instructions, catalogue guide, table of abbreviations, product and equipment variants
• Group 2 – Engine: repair kits, engine assembly, cylinder head, cylinder block, crankcase ventilation, cylinder liner and piston, pump drive power take-off, timing gear casing, crankshaft and related parts, oil sump, oil drain hose, engine mounting, oil filter, oil cooler, fuel pump, fuel filter, fuel tank, fuel injection pump, delivery pipes and injectors, inlet and exhaust manifold, exhaust system, muffler installation, burner, air to burner, fuel and air pipes, diesel particulate filter, air pump, pressure sensor, fuel metering unit, turbocharger, air filter, charge air cooler and plumbing, cooling system, water pump and thermostat housing, fan and fan shroud, engine ECU, cable harness, engine harness and sensors, engine management system EMS, EGR radiator with fitting parts
• Group 3 – Electrical systems and instruments: battery with assembling details, alternator with assembling details, generator for screed heating, starter motor, heat shield, ignition key, headlight with cable, level indicator light, additional rear lights, operator’s compartment lighting, work lights, auger lighting, hand lamp, horn, rotating beacon, windshield wiper, switch options on electrical distribution unit, emergency stop assembly, cables and battery leads, cable harnesses, electrical distribution units, control panels, mounting parts scanner, digital grade sensor, sonic ski sensor, digital laser sensor, analog grade sensor, ultrasonic sensor auger, digital slope sensor, slope controller with remote control, electric big-ski
• Group 4 – Power transmission: distributor gear, drive gear, travel motor with mounting parts
• Group 5 – Brakes: brake lines, valve block brake
• Group 7 – Frame, wheels and track: counterweights, track installation, idler wheel, track chain, material scraper
• Group 8 – Platform, cowling and cab: all-weather roof in yellow, grey and white, extended roof, side covers, insulating matting, pump assembly, engine cover, railing, cover plates front and under cab, cover plates and doors, shutters and air inlet covers, floor panels and cover plates, panels and cover plates, front windshield, seats, seat and console installation, control panel support, sun visor interior, storage box, tool kit, decal installation, accessories and tools for the paver
• Group 9 – Miscellaneous equipment and hydraulics: hydraulic oil tank, hydraulic system from tank to oil cooler, partial flow filter, hydraulic lines for pumps, auger, cylinders, auger height adjustment, engine, conveyor and drive line, hydraulic lines for screeds, valve blocks for tensioner, screed tensioner, control block, fan, conveyor reverse and standard, auger, auger height adjustment, cylinder circuit and brake, cylinders, screed load device, screed vario and crown control, hydraulic pump cylinder circuit and fan drive, vibration pump assembly, variable displacement pump, hose kits, hydraulic screed load device, tow arms, transport lock, screed anti-climbing lock, mechanical control assembly, clamping device assembly, holder kit grade sensor, screed spacer, fume extractor, emulsion tank, hydraulic screed tensioning device, tensioning cylinder, chain pre-assembly, direction indicator, slope control holder, levelling beam, levelling tube, mechanics big-ski, mast attachment laser sensor, control support, mounting parts Topcon, tool holder, hook clamp, indicating rod, central lubrication kit and pump, hopper standard and with front flap, hopper lock, basic auger installation, drive auger assembly, drive assembly, auger assembly, outer auger bearing, protective cover kit, adjustable side plate mounting kit, conveyor, conveyor drive shaft, conveyor pulley, conveyor drive unit, bar for conveyor chain, mix level control switch, oscillating cross beam, manual lubrication kit, laser scanner, laser transmitter set, levelling kits
• Group 10 – Replaced parts and numerical index

What makes this catalog genuinely useful on a working machine is the way each group is broken down. The engine section alone runs from the bare crankcase and cylinder block through the crankshaft, bearings, pistons, liners and timing gear to the fuel system, turbocharger, cooling circuit, EMS electronics and the EGR radiator. The hydraulic section maps every hose, valve block, pump and cylinder used on the paver, including the screed tensioning circuits and the auger and conveyor drive lines. The cab and platform groups cover the roof variants, covers, panels, doors and seats down to individual hinges, springs and fasteners. Because every entry carries a quantity column and the position number that matches the illustration, the catalog doubles as an assembly reference when a component has to be identified before it can be ordered.

Product and Equipment Variants

The catalog lists the equipment versions that were introduced for this machine, with their kit numbers, so the correct part can be selected for the machine as built. Among the entries are hydraulic systems for screed load assist, height adjustment for the extended screed, conveyor valve kits, indicating rods in metric and inch, split and continuous towing arms, counterweights, levelling sets, drive units, hoppers with and without front flap, auger and conveyor assemblies, and the full range of levelling and grade sensor kits.

Engine Coverage

Engine data is given for the power units used in this paver. The catalog references product number 15165701 for machines from serial number 710007-, with replacement version 17231359, and product number 17211402 for machines from serial number 715000-. Engine 46683694 is listed as the European D6 high power unit. The engine groups themselves use designations such as D6E and D6H, EU depending on the section.

Serial Number Coverage

The catalog applies to P6820C ABG pavers from serial number 716001- and from serial number 715001-, with additional serial references of 710007- and 715000- attached to the two engine product numbers. Checking the machine serial against these ranges before ordering is the quickest way to avoid picking a part that belongs to a different build.

How the Catalog Is Structured

Each text page carries a figure column, part number, quantity columns for the different product versions, a parts status column, a kit column, descriptions in five languages and a notes column. Notes flag kit contents, replaced part numbers, product or manufacturing number limits and references to other groups and pages. The parts status column uses standard codes so that a part that is no longer stocked, has been superseded, or has an alternative version available can be recognised before the order is placed. Group 10 repeats this information in two ways: as a replaced-parts list showing old numbers and their replacements, and as a numerical index listing every part number in the catalog with a reference to group, section and page.

Who This Parts Catalog Is For

This is written for the people who actually keep a P6820C ABG running: the workshop ordering spares, the fitter rebuilding an engine or a hydraulic circuit, the service engineer tracing a hose back to its valve block, and the owner who wants to quote a part number correctly the first time. Because the group structure mirrors the way the machine is assembled, it also works as a teardown and reassembly guide for anyone stripping a subassembly and needing to know what goes back where.

Get the Correct Part Number the First Time

Ordering a paver part from a description alone leads to wrong shipments, return freight and downtime. This Volvo P6820C ABG parts catalog gives the exact part number, the quantity required per machine and the position on the drawing, so a component can be confirmed visually before it is ordered. For a tracked paver working on a paving contract, that difference is measured in hours, not paperwork.

Whether the job is a routine filter and seal replacement, a hydraulic hose that has failed on site, an engine overhaul on a D6 unit, or rebuilding the screed tensioning circuit, the relevant group is here with its exploded view, its part list and its kit breakdown. The conveyor and auger assemblies, hopper, tow arms and levelling equipment each have their own dedicated sections, and the electrical groups cover the battery, alternator, starter, lighting, harnesses and distribution units right through to the grade and slope sensors used for levelling work.

Delivery is instant. The catalog arrives as a PDF immediately after payment, with no shipping and no waiting for a disc. It opens on a laptop, tablet or phone in the workshop, and any page, illustration or part list can be printed for the bench or the machine. Keep it on the service vehicle and the correct number is available the moment a part is needed.

IMAGES PREVIEW