2ETC3000 Spare Parts Catalogue FN455342 – Jungheinrich Electric Forklift Parts Manual PDF

Description

2ETC3000 Spare Parts Catalogue FN455342 – Illustrated Parts Reference for the Complete Truck

This is the full 2ETC3000 spare parts catalogue issued under document reference FN455342, covering the complete machine from the frame and overhead guard through to the traction motor, steering rack, hydraulic valve block, electric system and load lifting attachment. Every assembly is presented as a numbered exploded illustration paired with a matching table of item numbers, order numbers, descriptions and quantities, so a part can be identified visually and ordered by its exact number rather than by description alone.

The catalogue is organised into lettered groups (A through L) that follow the physical build of the truck. Each group breaks down into the individual assemblies that make up that section, and each assembly gets its own illustration page and parts list. For anyone maintaining, rebuilding or reordering for a 2ETC3000, this is the reference that removes guesswork from part identification.

File Details

• Manual type: Spare parts catalogue / illustrated parts list
• Document reference: FN455342
• Model: 2ETC3000
• Language: English
• Page count: 505 pages
• File format: PDF
• Content style: Exploded drawings with item-number tables

What This Parts Catalogue Gives You

The value of a factory parts breakdown is that it shows how the truck is actually assembled. Instead of ordering a bracket, a hinge or a seal by describing it over the phone, you find the assembly drawing, read off the item number, and look up the corresponding order number and quantity in the table beside it. The 2ETC3000 spare parts catalogue FN455342 works exactly that way across every major system on the machine.

Coverage runs from the smallest detail – a locking washer, a hollow spring pin, a spread rivet, a foam rubber band – up to complete assemblies such as the transmission wheel hub, the steering rack, the traction motor and the hydraulic pump unit. Hardware is listed with its thread size and length where the drawing shows it, and quantities per assembly are stated so you can order the right number of fasteners the first time.

Because the catalogue is built from the truck’s own documentation, the order numbers it lists are the numbers the parts were built and supplied under. That makes it useful for stock planning as well as for one-off repairs, and it is particularly helpful when a machine has been through several owners and the paperwork has long since disappeared.

Chapters Covered

• A – Frame and superstructure: frame assemblies, floor plate, overhead guard and attachment parts, battery door and mounting parts, covers and bonnets, counterweight, auxiliary weight, rear weight mounting parts, seat rail kit, utility box, operator seat and arm rests, safety and warning labels, identification plate
• B – Electric drive unit: traction motor 48V 4.50 kW UL, wheel hub and transmission GP25/178/177, drive traction assemblies, load wheel brake 48V, lever and brake pedal group
• D – Brake: brake components and pedal group assemblies
• E – Wheels / Axles: rear wheel 140/55-9/HW/ET-5, front wheel 18×7-8 HW, rims, tyres and wheel nuts
• F – Steering system: steering motor 48V UL, steering drive 0.9/48V three-wheel UL, steering rack UL, steering wheel assembly, steering column and locking device
• G – Hoist frame / Load lifting device: mast assemblies (DZ, ZH1, ZT/ZZ), fixed parts for outer, intermediate and inner mast, lift cylinder, free lift cylinder, sideshift carriage and fixed parts, connecting elements, chain and hose arrangements, HTU mast components, mast mounting parts
• G1 – Attachment: fork 2A/100x40x1000, locking device FEM 1…/2…, load guard 2A 980/1220 R9005
• H – Connection Chassis / Load Lifting Device: tilt cylinder 7.0 degrees and its bolts, clevis and retaining hardware
• I – Hydraulic system: valve block SK 7758-ST50 and seal kits, valve block ZH1, hydraulic unit ZH1/11.5 kW, pump motor 48V, hydraulic pump 11.0 cm3, hydraulic pipes ZH0 and ZH1, oil reservoir 1.5 L and its fittings
• J – Electric system: key switch 702, Solopilot operating and basic units, labels standard/optional/misc, control panel MFA, horn and el. system horn, working light S5/S6, headlamp system, flashing beacon, voltage transformer 150 W 48/24 V, display unit KH, cable kits front and rear, contactor rack, electrical system SP/MP, plate mounting electrics, grounding, fuses, shunting plug, buzzer
• K – Battery / Charger: battery trolley locking, battery trolley 550 Ah 4-roller, cable guide
• L – Lubes and Fluids: hydraulic oil grades and pack sizes, grease, chain spray, transmission oil

Alongside the lettered groups, the catalogue opens with a master sheet that lists every top-level assembly against its registration and serial reference, giving a quick index into the rest of the book. Software entries for Solopilot, operator position, steering system and drive/hoisting are listed there as well, together with the spare parts list and illustration reference itself.

Illustrations You Can Work From

The exploded drawings are the core of the catalogue. Each one is laid out so that numbered balloons point to individual components, and the adjacent table repeats those item numbers next to the order number, description and quantity. Assembly-level callouts (for example 10.10, 10.20 or 250.40.10, 250.50.2) are used where a sub-assembly breaks down further, letting you drill into a single hinge, lever, axle or damping element without ordering the whole unit.

Sections such as the traction motor and steering rack include cross-sectional views, so internal parts like ball bearings, circlips, shaft seals, needle bushes and conical roller bearings are identifiable in place. Hydraulic pages show hose runs, pipe lengths and connection points. Electrical pages show connector housings, seals, contact pins and cable kits by pole count, which is useful when a plug body or a single seal has to be replaced rather than an entire loom.

Who This 2ETC3000 Parts Catalogue Is For

Workshop technicians rebuilding a drive unit or a mast will find the torque-relevant hardware and the sub-assembly structure they need to put things back correctly. Parts departments can use the order-number tables to quote and stock. Fleet operators keeping older trucks running get a reliable way to identify components that are no longer obvious from the machine alone. Owners carrying out their own maintenance can at least confirm what a part is called and what it belongs to before ordering.

The catalogue is specific to the 2ETC3000 under serial FN455342. Where optional equipment is shown on a drawing – attachments, lighting, warning devices, auxiliary electrical systems – the corresponding parts list states which positions apply, so it is worth checking the bill of material against the drawing rather than assuming every item shown is fitted to your truck.

Instant Access to the Complete Parts Breakdown

Buying this 2ETC3000 spare parts catalogue FN455342 gives you the whole illustrated parts reference in one file – frame and superstructure, electric drive unit, brakes, wheels and axles, steering, hoist frame and load lifting device, attachment, chassis-to-mast connection, hydraulics, electric system, battery and charger, and the lubricants and fluids schedule. It is the difference between ordering a part you hope is right and ordering the part the truck was built with.

Delivery is instant. The PDF is available immediately after checkout, with no shipping and no waiting on a printed copy. Open it on a laptop or tablet in the workshop, or print the assembly pages you need and take them to the machine. Every exploded view and every order-number table is there from the first page to the last.

IMAGES PREVIEW